The EVAL-SSR01B-35W is intended to drive one LED string with a maximum output current of 700 mA.
The LED current can be adjusted by a PWM signal and the EN/DIS is managed on the board injecting an analog signal of 3.3 V. Both dimming and EN/DIS signals can also be provided by an external microcontroller thanks to a dedicated circuitry available on the PCB. The current dimming range is supported between 100% and 10% of maximum load.
On the secondary side, the board includes a connector to inject the PWM signal (Dimming) and the 3.3 V analog voltage (EN/DIS).
A very high power factor, low THD (THD optimizer circuit) and low BOM cost are features of this demonstration board. Input voltage variations, excessive input voltage (overvoltage like surges or bursts) and very low input voltages are managed by the HVLED001B protections, improving the reliability of the application.
The output capacitor is automatically discharged at turn-off to prevent any harm from contact with the output connector.
Output open circuit and overload protections (output short-circuit), with auto restart behavior, are implemented.
- Input voltage: 90 ÷ 265 Vrms, f: 45 - 66 Hz
- Output current: 700 mA (VLED = 24 V to 48 V)
- Dimming: 100% to 10%
- Dimming interfaces: PWM input
- High power factor, low THD
- Efficiency @ 230 Vac, full load: > 89%
- Open load voltage limiting (< 60 V)
- Fast VOUT discharge
- RoHS compliant
|产品型号||Marketing Status||封装||等级规格||符合RoHS级别||WEEE Compliant||材料声明**|
RoHS Compliance Grade
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
|产品型号||Order from distributors||从ST订购||核心产品||供货状态||供应商||ECCN (US)||ECCN (EU)||Country of Origin||Budgetary Price (US$)*/Qty|
|EVAL-SSR01B-35W|| distributors |
| Buy from Distributor ||HVLED001B|| |
Country of Origin: