STM32F072 Type-C端口管理器评估板,具有ON Semiconductor FUSB307B Type-C端口控制器

Partner products
Sales Briefcase
  • The ON-FUSB3-STM32 is a complete and cost effective solution to evaluate USB Type-C™ rev 1.3 interface and Power Delivery protocol revision PD 3.0.

    This evaluation board uses a TCPM/TCPC architecture with the STMicroelectronics STM32F072, 32-bit Arm® Cortex®-M0 MCU as a Type-C port manager (TCPM) and the ON Semiconductor® FUSB307B Type-C port controller device compliant with the USB-PD 3.0 v1.1 specification.
    The ON-FUSB3-STM32 board is compliant with the USB Type-C™ port controller interface (TCPCi) specification and is designed to manage a separate single- or multi-port Type-C port controller (TCPC) device.
    The FUSB307B offers a 1 Mbit/s I2C microcontroller interface and integrates control circuitry for high-voltage ports with functions such as plug-insertion/orientation detection and dead-battery power-up. Time-critical Power-Delivery functions that offload the microcontroller effectively enable any STM32, including entry-level devices, to manage multi-port, multi-role USB-PD interfaces.
    STMicroelectronics provides a software Expansion Package, X-CUBE-USB-PD, that implements the protocol layer and policy engine of the USB-PD specification 3.0.
    The ON-FUSB3-STM32 and the included software support one USB Type-C™ port operating as source, sink, or DRP, depending on the customer application use case. This evaluation board is designed for both stand-alone operation and connection to test equipment for specific testing.
    This product is supplied by a third party not affiliated to ST. For complete and latest information on the specification and the purchased parts package, refer to the third party's website http://www.onsemi.com/.


    • TCPM: STM32F072CB, 32-bit Arm® Cortex®-M0 microcontroller
    • TCPC: ON Semiconductor® FUSB307B device
    • USB Type-C™ rev 1.3 compatible
    • USB-PD rev3.0 v1.1 compatible
    • Fast role swap
    • Sink transmit
    • Extended data messages (chunked)
    • Dual-role functionality:
      • manual Type-C detection
      • automatic DRP (dual-role port) toggling
    • USB-PD interface specification support
      • automatic GoodCRC packet response
      • automatic retries of sending packet
      • all start of packet SOP* types supported
    • VBUS source and sink control
    • Integrated 3 W capable VCONN to CCx switch
    • 10-bit VBUS ADC
    • Programmable GPIOs
    • 4 selectable I2C addresses
    • Dead-battery operation
      • powered from VBUS
      • LDO output providing power to the STM32
    • Packages:
      • FUSB307B: 16-pin WQFN(3x3)
      • STM32F072CB: 48-pin LQFP(7x7)





    • 产品型号

      STM32上的USB Power Delivery,STM32Cube的软件扩展(UM2063)

00 选择要下载的文档

Presentations & Training Material

    • 描述 版本 文档大小 操作
      STM32 Development Boards Portfolio 1.0
      2.98 MB
      STM32 for USB Type-C applications 1.1
      2.16 MB
      STM32 solutions for USB-C™ & Power Delivery 1.1
      843.01 KB

      STM32 Development Boards Portfolio

      STM32 for USB Type-C applications

      STM32 solutions for USB-C™ & Power Delivery