The Premium Evaluation Boards System supports the 32-bit SPC574Sx STMicroelectronics' automotive microcontrollers.
The complete system consists of an SPC58XXMB/SPC57XXMB motherboard and an SPC574SADPTx daughter card which plugs into the motherboard. Different daughter cards are available for evaluating the whole family of device in all supported packages. All daughter cards are similar in design and concept.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI, LIN and FlexRAY).
The daughter card itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.
Open top MCU socket
Flexible MCU clocking options:
40 MHz crystal EVB clock circuit
8 MHz EVB clock oscillator circuit
External clock via SMA connector
User reset switch with reset status LEDs
14-pin standard JTAG connector
34-pin connector for Nexus 2 interface
38-pin Mictor connector for Nexus level 3+ debug and trace interface
Minimodule dimension: 127 mm X 114 mm
Standard connectors to SPC58XXMB/SPC57XXMB
SPC57 modular evaluation system
Single 12 V external power supply
Four on-board regulators:
5.0 V, 3.3 V and 1.25 V switching regulators
5 V linear regulator for the ADC supplies and references
Master power switch and regulator status LEDs
Two 240-way high-density expansion connectors for MCU daughter cards
All MCU signals readily accessible at a port-ordered group of 0.1” pitch headers
RS232/SCI physical interface and standard DB9 female connector
One FlexRAY channels interface with a DB9 connector (for both transceivers) and two alternative connectors
LINFlexD interface with two different style connectors
Two high speed CAN-FD channels and two female standard DB9 connectors
One potentiometer for analog voltage input and four user switches and 4 user LEDs, freely connectable