产品概述
描述
The STEVAL-CTM015V1 evaluation kit provides a complete solution for a three-phase switched reluctance motor (SRM) drive based on asymmetric half bridge flexible converter topology. The kit consists of the STEVAL-CTM015A1 driver board, the STEVAL-CTM015A2 power board and a 1 K/W heat sink already assembled.The driver board features a DC-DC power supply based on VIPER26L, LD1117S50, LD1117S33C, STM32F303CBT6 as MCU, and L6395D high voltage, single-chip high and low-side gate drivers for N-channel power MOSFETs or IGBTs.
The power board features an insulated metal substrate (IMS), NTCs for thermal protection, decoupling gate resistors for each IGBT, LMV331I comparators for overcurrent protection, STGB30H65FB trench gate field-stop, and STTH15RQ06 Turbo 2 soft ultrafast recovery diode.
By default, the STEVAL-CTM015V1 features insulated current sensors (ICS) for phase-current reading, but a three-shunt resistor current-sensing network based on TSV991IL is also available.
Soft-chopping speed control firmware, based on STM32F303CBT6 microcontroller, is available.
-
所有功能
- Driver board (STEVAL-CTM015A1)
- Based on three L6395D high voltage single-chip high and low-side gate drivers, with independent control of high and low-side
- STM32F303CBT6 microcontroller
- Support for quadrature incremental encoder and Hall effect rotor position sensor
- DC-DC power supply based on VIPER26LD, LD1117S50TR, and LD1117S33CTR
- Three insulated current sensors (ICS) for phase-current reading
- Hardware support for three-shunt topology via three TSV991ILT op-amplifiers
- Power board (STEVAL-CTM015A2)
- Insulated metal substrate (IMS)
- Hosts six STGB30H65FB IGBTs and six STTH15RQ06G2-TR diodes in a D2PAK-2 package
- Decoupling gate resistors
- NTC sensing network for overheat protection
- LMV331ICT comparators for overcurrent protection
- Heat sink for heat dissipation featuring a thermal resistance of 1 K/W
- Driver board (STEVAL-CTM015A1)
特别推荐
全部资源
Resource title | 版本 | Latest update |
---|
Board Manufacturing Specifications (1)
Resource title | 版本 | Latest update | ||
---|---|---|---|---|
ZIP | 1.0 | 29 Oct 2021 | 29 Oct 2021 |
物料清单 (1)
Resource title | 版本 | Latest update | ||
---|---|---|---|---|
1.0 | 29 Oct 2021 | 29 Oct 2021 |
Schematic Pack (1)
Resource title | 版本 | Latest update | ||
---|---|---|---|---|
1.0 | 29 Oct 2021 | 29 Oct 2021 |
质量与可靠性
产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | WEEE Compliant | 材料声明** |
---|---|---|---|---|---|---|
STEVAL-CTM015V1 | 目标 | CARD | 工业 | Ecopack2 | Yes | |
STEVAL-CTM015V1
Package:
CARDMaterial Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持。
样片和购买
产品型号 | Order from distributors | 从ST订购 | 核心产品 | 供货状态 | 供应商 | ECCN (US) | ECCN (EU) | Country of Origin | Budgetary Price (US$)*/Qty | |
---|---|---|---|---|---|---|---|---|---|---|
STEVAL-CTM015V1 | 无法联系到经销商,请联系我们的销售办事处 | L6395D, STTH15RQ06, STGB30H65FB, VIPER26L, LD1117S50, LD1117S33C | 目标 | ST | EAR99 | NEC | ITALY | |
无法联系到经销商,请联系我们的销售办事处