-
The STM32MP157A-EV1 and STM32MP157C-EV1 Evaluation boards are the full-feature demonstration and development platforms for STMicroelectronics Arm®-based dual Cortex®-A7 32 bits and Cortex®-M4 32 bits MPUs in the STM32MP1 Series. They leverage the capabilities of STM32MP1 Series microprocessors to allow users develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor.
They include an ST-LINK embedded debug tool, LEDs, push-buttons, one joystick, 1-Gbps Ethernet, CAN FD, one USB OTG Micro-AB connector, four USB Host Type-A connectors, LCD display with touch panel, camera, stereo headset jack with analog microphone input, four digital microphones, one SPDIF Rx/Tx, smartcard, microSD™ card, and eMMC, NOR and NAND Flash memories.
To expand the functionality of the STM32MP157A-EV1 and STM32MP157C-EV1 Evaluation boards, two GPIO expansion connectors are also available for motor control and Raspberry Pi® shields.主要特性
- STM32MP157 Arm®-based dual Cortex®-A7 32 bits + Cortex®-M4 32 bits MPU in LFBGA448 package
- ST PMIC STPMIC1
- 2 × 4-Gbit DDR3L, 16 bits, 533 MHz
- 2 × 512-Mbit Quad-SPI Flash
- 32-Gbit eMMC v5.0
- 8-Gbit SLC NAND, 8 bits, 8-bit ECC, 4-KB PS
- 1-Gbit/s Ethernet (RGMII) compliant with IEEE-802.3ab
- USB Host 4-port hub
- USB OTG HS
- CAN FD
- 5.5" TFT 720×1280 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
- SAI audio codec
- 5-megapixel, 8-bit camera
- 4 × ST-MEMS digital microphones
- Smartcard
- microSD™ card
- 2 user LEDs
- 2 user and reset push-buttons, 1 wake-up button
- 4-direction joystick with selection button
- 5 V / 4 A power supply
- Board connectors:
- Ethernet RJ45
- 4 × USB Host Type-A
- USB OTG Micro-AB
- SPDIF RCA input and output
- CAN FD
- Stereo headset jack including analog microphone input
- Audio jack for external speakers
- Motor control
- External I2C
- LTDC
- Trace, JTAG, RS-232
- GPIO expansion connector (Raspberry Pi® shields capability)
- MEMS-microphone daughterboard expansion connector
- On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port
- STM32CubeMP1 and full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs
精选 视频
In this video we discussed with just a few of the partners who have solutions already working on the STM32MP1.
Introducing our STM32MP1 microprocessor series with dual Arm® Cortex®-A7 and Cortex®-M4
Introducing our STM32MP1 microprocessor series with dual Arm® Cortex®-A7 and Cortex®-M4 Cores
开发工具硬件
软件
-
-
Picture 产品型号 制造商 描述 
STM32CubeMP1 ST STM32CubeMP1 Package for STM32MP1 series (HAL, Low-Layer APIs and CMSIS (CORE, DSP, RTOS), OpenAMP for Inter processor communication, coming with examples running on ST boards: Discovery kits and Evaluation boards) 
STM32MP1Dev ST STM32MP1 OpenSTLinux Developer Package 
STM32MP1Distrib ST STM32MP1 OpenSTLinux Distribution Package 
STM32MP1Starter -- STM32MP1 OpenSTLinux Starter Package 产品型号STM32CubeMP1 Package for STM32MP1 series (HAL, Low-Layer APIs and CMSIS (CORE, DSP, RTOS), OpenAMP for Inter processor communication, coming with examples running on ST boards: Discovery kits and Evaluation boards)
STM32MP1 OpenSTLinux Developer Package
STM32MP1 OpenSTLinux Distribution Package
STM32MP1 OpenSTLinux Starter Package
-
| 产品型号 | 供货状态 | 符合RoHS级别 | Material Declaration** |
|---|---|---|---|
| STM32MP157A-EV1 | 批量生产 | Ecopack1 | |
STM32MP157A-EV1
Package:
Ecopack1Material Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
