产品概述
描述
The STCOM is a device that integrates a power line communication (PLC) modem and a high-performance application core.
The PLC modem architecture has been designed to target the EN50065, FCC, ARIB compliant PLC applications. Together with the application core, it enables the STCOM to support the ITU-T G.9001, ITU-T G.9903 (G3-PLC®), ITU-T G.9904 (PRIME), IEEE 1901.2, IEC 61334-5-1 (G1), CLC/TS 50568 (METERS AND MORE®) and other narrow band PLC protocol specifications.
The STCOM basic block diagram is shown in Figure 1.
-
所有功能
- Integrated differential PLC analog front-end
- PGA with automatic gain control and ADC
- Current DAC with transmission predriver
- Digital transmission level control
- Zero crossing comparator
- Up to 500 kHz PLC signal bandwidth
- Integrated dual line driver
- 14 V p-p single ended, 28 V p-p differential output range
- Very high linearity for EMC compliance
- Externally configurable amplifier topology
- 1 A rms max. current
- Embedded overtemperature protection
- Suitable for all PLC signals up to 500 kHz
- Fully reprogrammable real-time engine (RTE) modem for PLC standards up to 500 kHz
- Integrated application core: ARM® 32-bit Cortex™-M4F CPU
- 96 MHz maximum frequency
- 8-channel direct memory access controller
- 8-region memory protection unit
- Serial wire and JTAG interfaces
- Cortex-M4 Embedded Trace Macrocell™
- Up to 86 multiplexed GPIOs
- 11 timers
- 1 flexible CRC calculation unit
- 5 USARTs (ISO 7816 compliant), 5 SPI, 3 I2C
- 12-bit general purpose ADC with 6 channels
- Cryptographic engine
- AES 128/192/256 engine
- True random number generator
- Memories
- 640 kB or 1 MB of embedded Flash
- 128 kB of embedded SRAM
- 8 kB of embedded shared RAM
- Flexible static memory controller
- Clock management
- 24 MHz external crystal for system clock with internal QFS synthesizer
- 32.768 kHz external crystal for RTC
- Power management
- 3.3 V and 8 - 18 V external supply voltages
- 1.2 V and 5 V integrated linear regulators
- Normal and low power modes
- Real-time clock (RTC)
- VBAT supply with battery health monitoring for RTC and backup registers
- -40 °C to +85 °C operating temperature range
- Integrated differential PLC analog front-end
您可能还会喜欢...
EDA符号、封装和3D模型
STMicroelectronics - STCOM
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型
质量与可靠性
| 产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| STCOM05 | 批量生产 | TQFP 176 20x20x1.0 | 工业 | Ecopack2 | |
| STCOM10 | 批量生产 | TQFP 176 20x20x1.0 | 工业 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
样片和购买
| 产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 封装 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度（ºC） | Operating Temperature (°C) (min) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||||
| STCOM05 | | | distributors 无法联系到经销商，请联系我们的销售办事处 | TQFP 176 20x20x1.0 | Tray | PHILIPPINES | EAR99 | 5A002.a.2 | - | - | - | |||
| STCOM10 | | | distributors 无法联系到经销商，请联系我们的销售办事处 | TQFP 176 20x20x1.0 | Tray | PHILIPPINES | EAR99 | 5A002.a.2 | - | - | - | |||
STCOM05 批量生产
STCOM10 批量生产