For demonstration purposes the USB microcontroller used is the ST72F63BE2 8-bit microcontroller. The STUSB03 connected with a USB controller is ideal for use in mobile phones, digital cameras, printers, PDAs, etc. All the hardware components except the transceiver IC are the same for the STEVAL-PCC003V1 and STEVAL-PCC004V1 demonstration boards. The demonstration board is comprised of one mini-B USB connector, a USB controller, a USB transceiver, two 2-to-4 demultiplexers and all required discrete components (pull-up resistors, series resistors and power supply capacitors).
The device can be configured through a set of jumpers and the main signals can be accessed through test points. The demonstration board is powered from a USB mini-B or, optionally, from an external supply. The STUSB03 transceiver is connected at the USB communication lines of the microcontroller.
Based on the STUSB03, single chip USB transceivers that support both USB fullspeed and USB low-speed operations USB to mini-B cable
USB HID demonstration GUI
|VFQFPN 16 3x3x0.9||工业||Ecopack3||
Package:VFQFPN 16 3x3x0.9
VFQFPN 16 3x3x0.9
RoHS Compliance Grade
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.