-
The STUSB1600 is an IC controller, fully compliant with the USB Type-C cable and connector specification (rev. 1.2), which addresses 5 V USB Type-C port management both on the host and/or device side. It is designed for a broad range of applications and can handle the following USB Type-C functions: attach detection, plug orientation detection, host to device connection, VCONN support, and VBUS configuration. Thanks to its 20 V technology, it implements high voltage protection features against short-circuits to VBUS up to 28 V. The device supports dead battery mode and is fully customizable thanks to an integrated non-volatile memory.
Key Features
- Type-C attach and cable orientation detection
- Power role support: source / sink / DRP
- Configurable start-up profiles
- Integrated power switch for VCONN supply:
- Programmable current limit up to 600 mA
- Overcurrent, overvoltage and thermal protections
- Undervoltage lockout
- I2C interface and interrupt (optional connection to MCU)
- Integrated VBUS voltage monitoring
- Integrated VBUS and VCONN discharge path
- Short-to-VBUS protection on CC pins (22 V) and VBUS pins (28 V)
- Dead-battery mode support
- Accessory mode support
- High and/or low voltage power supply:
- VSYS = [3.0 V; 5.5 V]
- VDD = [4.1 V; 22 V]
- ESD: 4 kV HBM - 1.5 kV CDM
- Temperature range: -40 °C up to 105 °C
- Certification test ID: 1000100
精选 视频
STUSB ICs have been designed to protect your devices from electrical hazards
软件
评估工具
-
-
Picture Part number 制造商 描述 
STEVAL-CCC002V1 -- STUSB1600A Type-C™ controller evaluation board 
STEVAL-STRKT01 ST LoRa® IoT tracker 产品型号STUSB1600A Type-C™ controller evaluation board
LoRa® IoT tracker
-
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
