产品概述
描述
The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.
-
所有功能
- Operating voltage 2.25 V to 3.6 V
- Operating temperature –40 °C to +125 °C
- Programmable
- 10 different conversion rates 0.0625 to 32 conversions/sec. 1 conversion/sec. - default
- 4 different resolutions 9-bit (0.5 °C/LSB) to12-bit (0.0625 °C/LSB) 10-bit (0.25 °C/LSB) - default
- Low supply current
- 50 μA (typ) for 8 conversions/sec.
- 20 μA (typ) for 1 conversion/sec.
- 3 μA (typ) standby
- Accuracy
- ±0.5 °C (typ) 0 °C to +85 °C
- ±0.5 °C (typ) –40 °C to +125 °C
- One-shot mode for power saving
- Fast conversion time 21 ms (typ) 10-bit
- Pull-up resistor value allows single pin to select one of four slave addresses
- Supports 400 kHz serial clock
- SMBus 2.0 compatible
- SMBus ALERT (ARA) support
- SMBus timeout
- RoHS/green
您可能还会喜欢...
精选 视频
The STEVAL-MKSBOX1V1 (SensorTile.box) is a ready-to-use box kit with wireless IoT and wearable sensor platform to help you use and develop apps based on remote motion and environmental sensor data, regardless of your level of expertise.
特别推荐
All tools & software
全部资源
| 资源标题 | 版本 | 更新时间 |
|---|
产品规格 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 7.0 | 21 May 2019 | 21 May 2019 |
应用手册 (2)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 13 Sep 2018 | 13 Sep 2018 | ||
| 1.0 | 02 Apr 2020 | 02 Apr 2020 |
Design Notes & Tips (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 10 Mar 2021 | 10 Mar 2021 |
宣传册 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 14 Nov 2023 | 14 Nov 2023 |
手册 (4)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 2.0 | 09 Dec 2020 | 09 Dec 2020 | ||
| 2.1 | 23 Jun 2020 | 23 Jun 2020 | ||
| 01.21 | 25 Aug 2021 | 25 Aug 2021 | ||
| 12.21 | 09 Dec 2021 | 09 Dec 2021 |
EDA符号、封装和3D模型
STMicroelectronics - STTS751
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型
质量与可靠性
| 产品型号 | Marketing Status | 封装 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|
| STTS751-0DP3F | 批量生产 | DFN6 2X2X0.5 | Ecopack2 | |
| STTS751-1DP3F | 批量生产 | DFN6 2X2X0.5 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
样片和购买
| 产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 封装 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度（ºC） | Operating Temperature (°C) (min) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||||
| STTS751-0DP3F | | | distributors 无法联系到经销商，请联系我们的销售办事处 | DFN6 2X2X0.5 | Tape and Reel | THAILAND | EAR99 | NEC | -40 | 125 | -40 | |||
| STTS751-1DP3F | | | distributors 无法联系到经销商，请联系我们的销售办事处 | DFN6 2X2X0.5 | Tape and Reel | THAILAND | EAR99 | NEC | -40 | 125 | -40 | |||
STTS751-0DP3F 批量生产
STTS751-1DP3F 批量生产