带有DSP和FPU指令的STM32F3系列混合信号MCU
STM32F3系列集成了运行于72 MHz的32位Arm® Cortex®-M4内核（带有FPU和DSP指令）以及丰富的模拟外设，从而降低整体应用成本并简化系统设计，它包括：
- 超快速比较器 (25 ns)
- 具有可编程增益的运算放大器
- 12位DAC
- 超快速12位ADC，每通道每秒5 MSPS（每秒百万次采样），交替模式下可达到每秒18 MSPS
- 精确的16位sigma-delta ADC（21通道）
- 内核耦合存储器SRAM（例行程序加速器）是提高时间关键程序性能所专用的存储器架构，可将性能提升43%
- 144 MHz高级16位脉宽调制定时器（分辨率 < 7 ns），用于控制应用
- 高分辨率定时器（217 ps），针对供电和温度漂移可进行自补偿
灵活的内部互连矩阵可实现在外设之间的自主式通信，节省了CPU资源并降低了功耗。
与STM32F0系列高度兼容，保证了在设计不同性能等级的衍生应用时有卓越的设计效率。
STM32F3系列混合信号微控制器包括：
- STM32F301、STM32F302、STM32F303通用产品线范围包括了基本型产品、包含高性价比外设组合的产品，以及具有更高性能和更多模拟功能，并可管理高达三个FOC电机控制的产品。
- STM32F334具有高分辨率定时器 (217 ps) 和用于数字电源转换的复杂波形生成器和事件处理器 (HRTIM)，适用于数字开关模式电源、照明、焊接、太阳能和无线充电等应用。
- STM32F373具有16位sigma-delta ADC和7种内置增益，能够在生物识别传感器或智能计量等应用中实现高精度测量。
- STM32F3x8产品线支持1.8 V的工作电压
封装选项为LQPF48/64/100、UFBGA100、WLCSP100/66/49、UQFN32，现可用于16到512 KB Flash的器件。
温度范围是-40到85°C或-40到105°C（结温为125°C）。
精选 视频
Getting Started with the P-NUCLEO-IHM001
The STM32F3 series of mixed-signal microcontrollers that combine a 32-bit ARM® Cortex®-M4 core with digital signal processing and floating point unit instructions.
特别推荐
Recommended Tools & Software
STM32CubeF3
Browse more STM32Cube MCU包，用于STM32F3系列（HAL、底层API和CMSIS（CORE、DSP和RTOS）、USB、File system、RTOS、Touch Sensing和Graphic - 附带在以下ST板上运行的示例：STM32 Nucleo、探索套件和评估板）
eDesignSuite
eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.
Power Management Design Center
Thermal-electrical Simulators for Components
Signal Conditioning Design Tool
NFC/RFID Calculators
Choose design tool: 
SMPS design, by topology, by type and by product PFC design with analog and digitial control Supports various PCB configurations 
Handles AC-DC and DC-DC design in common topologies Displays interactive and annotated schematic Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data 
Provides a step-by-step optimized design of power section and control loop Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs 
Specify input/output power for each node in the tree Check for consistency Design each individual node
Power Supply Design Tool
SMPS design, by topology, by type and by product PFC design with analog and digitial control Supports various PCB configurations Choose type: DC/DC AC/DC 太阳能电池充电器
LED Lighting Design Tool
Handles AC-DC and DC-DC design in common topologies Displays interactive and annotated schematic Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data Choose type: DC/DC AC/DC
Digital Power Workbench
Provides a step-by-step optimized design of power section and control loop Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs Choose type: ZVS Totem Pole PFC FB LLC Vienna Rectifier 3-Level T-type Converter
Power Tree Designer
Specify input/output power for each node in the tree Check for consistency Design each individual node Choose design tool: 
Select ratings and application waveforms Get junction temperature and blocking voltage graphs Search and sort suitable devices 
Select ratings and application waveforms Estimate power losses Search and sort suitable devices 
Supports long mission profiles Provides power loss and temperature graphs Helps define heatsink thermal properties 
Help select the right ViPOWER Automotive power device Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis Supports various PCB configurations 
Specify system ratings and surge waveform Search and sort suitable devices
AC Switches Simulator
Select ratings and application waveforms Get junction temperature and blocking voltage graphs Search and sort suitable devices Rectifier Diodes Simulator
Select ratings and application waveforms Estimate power losses Search and sort suitable devices STPOWER Studio
Supports long mission profiles Provides power loss and temperature graphs Helps define heatsink thermal properties Twister Sim
Help select the right ViPOWER Automotive power device Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis Supports various PCB configurations TVS Simulator
Specify system ratings and surge waveform Search and sort suitable devices Choose design tool: 
Handles multi-stage-designs and common topologies Returns circuit component values Provides gain, phase and group delay graphs Low Pass, High Pass and Band Pass 
Handles most common configurations Returns circuit components values Provides I/O signal waveforms Inverting, Non Inverting, Window 
Returns circuit component values Provides current error graphs 
Provides current error graphs. Help to select the right High side current sensing and shunt devices.
Active Filters
Handles multi-stage-designs and common topologies Returns circuit component values Provides gain, phase and group delay graphs Low Pass, High Pass and Band Pass Comparators
Handles most common configurations Returns circuit components values Provides I/O signal waveforms Inverting, Non Inverting, Window Low side Current Sensing
Returns circuit component values Provides current error graphs High side Current Sensing
Provides current error graphs. Help to select the right High side current sensing and shunt devices. Choose design tool: 
Input geometry and substrate properties Get antenna impedance 
Enter forward and reverse link characteristics The tool returns link budget estimate 
Enter antenna parameter and matching target Select the topology of the matching network The tool returns component values for the desired design targets
NFC Inductance
Input geometry and substrate properties Get antenna impedance UHF Link Budget
Enter forward and reverse link characteristics The tool returns link budget estimate NFC Tuning Circuit
Enter antenna parameter and matching target Select the topology of the matching network The tool returns component values for the desired design targets