STM32H742AI

概述

样片和购买

解决方案

文件

CAD资源

工具与软件

质量与可靠性

开始

Partner products

Sales Briefcase

Please enter your desired search query and search again

产品概述

描述

STM32H742xI/G and STM32H743xI/G devices are based on the high-performance Arm^® Cortex^®-M7 32-bit RISC core operating at up to 480 MHz. The Cortex^® -M7 core features a floating point unit (FPU) which supports Arm^® double-precision (IEEE 754 compliant) and single-precision data-processing instructions and data types. STM32H742xI/G and STM32H743xI/G devices support a full set of DSP instructions and a memory protection unit (MPU) to enhance application security.

STM32H742xI/G and STM32H743xI/G devices incorporate high-speed embedded memories with a dual-bank flash memory of up to 2 Mbytes, up to 1 Mbyte of RAM (including 192 Kbytes of TCM RAM, up to 864 Kbytes of user SRAM and 4 Kbytes of backup SRAM), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, 2x32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memory access.

All the devices offer three ADCs, two DACs, two ultra-low power comparators, a low-power RTC, a high-resolution timer, 12 general-purpose 16-bit timers, two PWM timers for motor control, five low-power timers, a true random number generator (RNG). The devices support four digital filters for external sigma-delta modulators (DFSDM). They also feature standard and advanced communication interfaces.

所有功能
Includes ST state-of-the-art patented technology

内核

32-bit Arm^® Cortex^®-M7 core with double-precision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

Memories

Up to 2 Mbytes of flash memory with read-while-write support

Up to 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), Up to 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain

Dual mode Quad-SPI memory interface running up to 133 MHz

Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND flash memory clocked up to 100 MHz in Synchronous mode

CRC calculation unit

安保

ROP, PC-ROP, active tamper

General-purpose input/outputs

Up to 168 I/O ports with interrupt capability

Reset and power management

3 separate power domains which can be independently clock-gated or switched off:
D1: high-performance capabilities

D2: communication peripherals and timers

D3: reset/clock control/power management

1.62 to 3.6 V application supply and I/Os

POR, PDR, PVD and BOR

Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs

Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry

Voltage scaling in Run and Stop mode (6 configurable ranges)

Backup regulator (~0.9 V)

Voltage reference for analog peripheral/V_REF+

Low-power modes: Sleep, Stop, Standby and V_BATsupporting battery charging

Low-power consumption

V_BAT battery operating mode with charging capability

CPU and domain power state monitoring pins

2.95 µA in Standby mode (Backup SRAM OFF, RTC/LSE ON)

Clock management

Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI

External oscillators: 4-48 MHz HSE, 32.768 kHz LSE

3× PLLs (1 for the system clock, 2 for kernel clocks) with Fractional mode

Interconnect matrix
4 DMA controllers to unload the CPU

1× high-speed master direct memory access controller (MDMA) with linked list support

2× dual-port DMAs with FIFO

1× basic DMA with request router capabilities

Up to 35 communication peripherals

4× I2Cs FM+ interfaces (SMBus/PMBus)

4× USARTs/4x UARTs (ISO7816 interface, LIN, IrDA, up to 12.5 Mbit/s) and 1x LPUART

6× SPIs, 3 with muxed duplex I2S audio class accuracy via internal audio PLL or external clock, 1x I2S in LP domain (up to 150 MHz)

4x SAIs (serial audio interface)

SPDIFRX interface

SWPMI single-wire protocol master I/F

MDIO Slave interface

2× SD/SDIO/MMC interfaces (up to 125 MHz)

2× CAN controllers: 2 with CAN FD, 1 with time-triggered CAN (TT-CAN)

2× USB OTG interfaces (1FS, 1HS/FS) crystal-less solution with LPM and BCD

Ethernet MAC interface with DMA controller

HDMI-CEC

8- to 14-bit camera interface (up to 80 MHz)

11 analog peripherals

3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)

1× temperature sensor

2× 12-bit D/A converters (1 MHz)

2× ultra-low-power comparators

2× operational amplifiers (7.3 MHz bandwidth)

1× digital filters for sigma delta modulator (DFSDM) with 8 channels/4 filters

Graphics

LCD-TFT controller up to XGA resolution

Chrom-ART graphical hardware Accelerator (DMA2D) to reduce CPU load

Hardware JPEG Codec

Up to 22 timers and watchdogs

1× high-resolution timer (2.1 ns max resolution)

2× 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input (up to 240 MHz)

2× 16-bit advanced motor control timers (up to 240 MHz)

10× 16-bit general-purpose timers (up to 240 MHz)

5× 16-bit low-power timers (up to 240 MHz)

2× watchdogs (independent and window)

1× SysTick timer

RTC with sub-second accuracy and hardware calendar

Debug mode

SWD & JTAG interfaces

4-Kbyte embedded trace buffer

True random number generators (3 oscillators each)

96-bit unique ID
阅读更多阅读较少信息