The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits on the same chip. By using mixed technology it has been possible to optimize the logic circuitry and the power stage to achieve the best possible performance. The DMOS output transistors can operate at supply voltages up to 42V and efficiently at high switching speeds. All the logic inputs are TTL, CMOS and µC compatible. Each channel (half-bridge) of the device is controlled by a separate logic input, while a common enable controls both channels. The I.C. is mounted in three different packages.
|DS0075: DMOS full bridge driver||5.3||6.82 MB|
|AN280: Controlling voltage transients in full-bridge driver applications||3.0||385.85 KB|
|AN5268: Driving high power DC motor by paralleling M0-7 VNHD7xxxAY H-Bridge and M0-7 high-side driver||1.0||467.19 KB|
|AN279: Short-circuit protection on the L6201, L6202 and the L6203||2.0||111.64 KB|
|AN235: Stepper motor driving||2.2||1.25 MB|
|DT0003: Implementing fast decay mode chopping using the L6506||1.1||276.79 KB|
|DT0002: Reducing torque variation in half step drive||1.1||128.9 KB|
|An introduction to electric motors||1.0||2.23 MB|
|STSPIN 电机驱动器||09.2016||1.47 MB|
|Motor Control Reference Guide||15.10||7.15 MB|
|Products and solutions for Smart industry||3.0||3.32 MB|
|STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control||1.0||5.54 MB|
The STSPIN220 stepper motor driver, STSPIN230 brushless DC motor driver, STSPIN240 dual brushed DC motor driver and STSPIN250 single brushed DC motor driver are optimized to deliver low noise, minimal power consumption and standby mode of operation along with features such as extreme position accuracy and motion smoothness with up to 256 micro-steps per step.
Get started on your next design with these tools available from ST for STSPIN220, STSPIN230, STSPIN240 and STSPIN250 using the STM32 ODE Nucleo boards and development software.
STSW-SPIN002 evaluation software with
STSW-SPIN002 - Evaluation software with graphical user interface for STSPIN motor driver ICs
The following X-NUCLEO expansion baords X-Cube software support the devices
|Device||X-NUCLEO Board||X-CUBE Software|
X-NUCLEO-IHM06A1 - Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 Nucleo
X-CUBE-SPN6 - Low voltage stepper motor driver software expansion for STM32Cube
X-NUCLEO-IHM11M1 - Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 Nucleo
X-CUBE-SPN11 - Low voltage three-phase brushless DC motor driver software expansion for STM32Cube
X-NUCLEO-IHM12A1 - Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 Nucleo
X-CUBE-SPN12 - Low voltage dual brush DC motor driver software expansion for STM32Cube
For other STSPIN devices
|型号||Marketing Status||Quantity||Unit Price (US$) *||Package||Packing Type||Operating Temperature (°C) (min)||Operating Temperature (°C) (max)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|L6203||Active : Product is in volume production||1000||3.813||MW 11L||Tube||-40||150||EAR99||MOROCCO||MORE INFO||Free Sample Add to cart||DISTRIBUTOR AVAILABILITY|
|型号||Marketing Status||Package||Grade||Marketing Lead Time Qty||Material Declaration**|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.