产品概述
描述
The ALED6001 is an automotive-grade (AECQ100 compliant) LED driver that combines a boost controller and high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. PWM dimming of the LED brightness is achieved by means of an external MOSFET in series with the LED string and directly driven by a dedicated pin. The pin that manages the LED current setting, usually connected to an external resistor, can also be used as analog control if a microcontroller is located in the LED module. The high-side current sensing, in combination with a P-channel MOSFET, provides effective protection in case the positive terminal of the LED string is shorted to ground. The high precision current sensing circuitry allows an LED current regulation reference within ± 4% accuracy over the entire temperature range and production spread. A fault output (open-drain) informs the host system of faulty conditions: device overtemperature, output overvoltage (disconnected LED string) and LED overcurrent.
-
所有功能
- AECQ100 qualification
- Switching controller section
- 5.5 V to 36 V input voltage range
- Very low shutdown current: ISHDN < 10 μA
- Internal +5 V LDO for gate driver supply
- Internal +3.3 V LDO for device supply
- Fixed frequency peak current mode control
- Adjustable (100 kHz to 1 MHz) switching frequency
- External synchronization for multi-device applications
- High performance external MOSFET driver
- Cycle-by-cycle external MOSFET OCP
- Fixed internal soft-start
- Programmable output OVP
- Boost, buck-boost and SEPIC topologies supported
- Thermal shutdown with autorestart
- Output short-circuit detection
- LED control section
- Up to 60 V output voltage
- Constant current control loop
- High-side output current sensing circuitry
- 30 to 300 mV differential sensing voltage
- ± 4% output current reference accuracy
- Output overcurrent protection
- Sensing resistor failure protection
- PWM dimming with auxiliary series switch
- Analog dimming
eDesignSuite
eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.
Power Supply Design Tool
您可能还会喜欢...
特别推荐
EDA符号、封装和3D模型
质量与可靠性
产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
---|---|---|---|---|---|
ALED6001 | NRND | HTSSOP16 | 汽车应用 | Ecopack2 | |
ALED6001TR | 批量生产 | HTSSOP16 | 汽车应用 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持。
样片和购买
产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 封装 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 温度(ºC) | Operating Temperature (°C) (min) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
最小值 | 最大值 | |||||||||||||
ALED6001 | | | distributors 无法联系到经销商,请联系我们的销售办事处 | HTSSOP16 | Tube | PHILIPPINES | EAR99 | NEC | -40 | 150 | -40 | |||
ALED6001TR | | | distributors 无法联系到经销商,请联系我们的销售办事处 | HTSSOP16 | Tape and Reel | PHILIPPINES | EAR99 | NEC | -40 | 150 | -40 |
ALED6001 NRND
ALED6001TR 批量生产