L6360

批量生产
Education

IO-Link communication master transceiver IC

下载数据手册

Order a free sample and buy from our distributors

样片和购买
概述
资源
工具与软件
解决方案
eDesignSuite
质量与可靠性
Sales Briefcase
开始
样片和购买
Partner products
  • The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut-off current delay time, and restart delay are programmable. Cut-off current and cut-off current delay time, combined with thermal shutdown and automatic restart, protect the device against overload and short-circuit. C/QO and L+ output stages are able to drive resistive, inductive and capacitive loads. Inductive loads up to 10 mJ can be driven. Supply voltage is monitored and low voltage conditions are detected. The L6360 transfers, through the PHY2(C/QO pin), data received from a host microcontroller through the USART (IN C/QO pin), or to the USART (OUT C/QI pin) data received from PHY2 (C/QI pin). To enable full IC control, configuration and monitoring (i.e. fault conditions stored in the status register), the communication between the system microcontroller and the L6360 is based on a fast mode 2-wire I2C. The L6360 has nine registers to manage the programmable parameters and the status of the IC. Monitored fault conditions are: L+ line, overtemperature, C/Q overload, linear regulator undervoltage, and parity check. Internal LED driver circuitries, in open drain configuration, provide two programmable sequences to drive two LEDs.

    主要特性

    • Supply voltage from 18 V to 32.5 V
    • Programmable output stages: high-side, low-side or push-pull (< 2 Ω)
    • Up to 500 mA L+ protected high-side driver
    • COM1, COM2 and COM3 mode supported
    • Additional IEC61131-2 type 1 input
    • Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
    • 3.3 V / 5 V, 50 mA linear regulator
    • 5 mA IO-Link digital input
    • Fast mode I2C for IC control, configuration and diagnostic
    • Diagnostic dual LED sequence generator and driver
    • 5 V and 3.3 V compatible I/Os
    • Overvoltage protection (> 36 V)
    • Overtemperature protection
    • ESD protection
    • Miniaturized VFQFPN 26L (3.5x5x1 mm) package

电路原理图

下载 下载

样片和购买

产品型号
封装
包装类型
供货状态
ECCN (US)
Country of Origin
Budgetary Price (US$)*/Qty
从ST订购
从分销商订购
L6360 VFDFPN 26 3.5x5 Tray
批量生产
EAR99 PHILIPPINES 2.791 / 1k 没有经销商,请联系我们的销售办事处
L6360TR VFDFPN 26 3.5x5 Tape And Reel
批量生产
EAR99 PHILIPPINES 2.791 / 1k 获取样片 查看供货情况

...的经销商可用性L6360TR

代理商名称
地区 库存 最小订购量 第三方链接
DIGIKEY WORLDWIDE 1788 1 马上订购
ARROW EUROPE 9000 0 马上订购
MOUSER WORLDWIDE 2609 1 马上订购
Farnell Element14 EUROPE 1018 1 马上订购

代理商库存报告日期: 2020-05-29

代理商名称

DIGIKEY

库存

1788

Min.Order

1

地区

WORLDWIDE 马上订购

ARROW

库存

9000

Min.Order

0

地区

EUROPE 马上订购

MOUSER

库存

2609

Min.Order

1

地区

WORLDWIDE 马上订购

Farnell Element14

库存

1018

Min.Order

1

地区

EUROPE 马上订购

代理商库存报告日期: 2020-05-29

L6360

封装

VFDFPN 26 3.5x5

包装类型

Tray

Budgetary Price (US$)*/Qty

2.791 / 1k

供货状态

批量生产

Budgetary Price (US$)* / Qty

2.791 / 1k

ECCN (US)

EAR99

Country of Origin

PHILIPPINES

L6360TR

封装

VFDFPN 26 3.5x5

包装类型

Tape And Reel

Budgetary Price (US$)*/Qty

2.791 / 1k

...的经销商可用性L6360TR

代理商名称
地区 库存 最小订购量 第三方链接
DIGIKEY WORLDWIDE 1788 1 马上订购
ARROW EUROPE 9000 0 马上订购
MOUSER WORLDWIDE 2609 1 马上订购
Farnell Element14 EUROPE 1018 1 马上订购

代理商库存报告日期: 2020-05-29

代理商名称

DIGIKEY

库存

1788

Min.Order

1

地区

WORLDWIDE 马上订购

ARROW

库存

9000

Min.Order

0

地区

EUROPE 马上订购

MOUSER

库存

2609

Min.Order

1

地区

WORLDWIDE 马上订购

Farnell Element14

库存

1018

Min.Order

1

地区

EUROPE 马上订购

代理商库存报告日期: 2020-05-29

供货状态

批量生产

Budgetary Price (US$)* / Qty

2.791 / 1k

ECCN (US)

EAR99

Country of Origin

PHILIPPINES

(*) 建议转售单价(美元)仅用于预算用途。如需以当地货币计价的报价,请联系您当地的 ST销售办事处 或我们的 经销商

适合您的资源

相关应用

工厂自动化

连接

开发工具硬件

生态系统

    • 产品型号

      STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack

软件

评估工具

    • 产品型号

      IO-Link master multi-port evaluation board based on L6360

      IO-Link master multi-port evaluation board based on L6360

      IO-Link communication master transceiver demonstration board based on the L6360

      IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo

00 选择要下载的文档

技术文档

    • 描述 版本 文档大小 操作
      DS8900
      IO-Link communication master transceiver IC
      7.0
      1.31 MB
      PDF
      DS8900

      IO-Link communication master transceiver IC

    • 描述 版本 文档大小 操作
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

    • 描述 版本 文档大小 操作
      AN5041
      IO-Link solution based on STEVAL-IDP004V2 master evaluation board and STEVAL-IDP003V1 kit
      4.0
      1.34 MB
      PDF
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN5041

      IO-Link solution based on STEVAL-IDP004V2 master evaluation board and STEVAL-IDP003V1 kit

      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

Presentations & Training Material

    • 描述 版本 文档大小 操作
      L6360 and L6362A: A smart way to drive industrial sensors and actuators 1.0
      906.99 KB
      PDF

      L6360 and L6362A: A smart way to drive industrial sensors and actuators

出版刊物和宣传资料

    • 描述 版本 文档大小 操作
      IO-Link Nucleo Packs based on L6360, L6362A and STM32 11.2018
      1.26 MB
      PDF
      L6360 and L6362A - Embracing the Industry 4.0 revolution 12.2018
      282.88 KB
      PDF

      IO-Link Nucleo Packs based on L6360, L6362A and STM32

      L6360 and L6362A - Embracing the Industry 4.0 revolution

    • 描述 版本 文档大小 操作
      Intelligent power switches (IPS) 04.2018
      4.21 MB
      PDF
      面向IO-Link的 产品和解决方案 08.2017
      491.91 KB
      PDF

      Intelligent power switches (IPS)

      面向IO-Link的 产品和解决方案


    • The STEVAL-IDP004V1 (powered by an STM32F205) hosts four L6360 IO-Link and SIO (Standard Input Output) mode Master transceivers, and can retrieve information from up to four STEVAL-IDP003V1 sensor boards. These sensor boards are powered by an STM32L071 and host the L6362A IO-Link and SIO mode Device transceiver.

      The solution is for industrial applications running serial asynchronous communication protocols such as IO-Link.

      This evaluation tool replicates an industrial-sensor board (form factor is 8 x 70 mm), but it also lets you swap the sensors (four daughter boards are provided with VL6180X, IIS2DH, STTS751, IIS328DQ) so you can perform proximity, vibration, temperature or acceleration measurements.

      A GUI is available for use with any free terminal emulator.
      The two boards are equipped with standard industrial M12 connectors, as you would expect in real use scenarios involving predictive maintenance applications.
      The IO-Link protocol stack is not included in the package.
       

      解决方案组件
      产品型号 描述 状态 核心产品 价格 (US$)*
      订购 / 下载
      全部购买
      STEVAL-IDP004V1

      主要特性

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      显示较多内容

      IO-Link master multi-port evaluation board based on L6360
      NRND
      L6360 123.73 立即购买
      STEVAL-IDP003V1

      主要特性

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      显示较多内容

      IO-Link industrial modular sensor board based on L6362A
      批量生产
      L6362A 106.58 立即购买
      STSW-IO-LINK

      主要特性

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      显示较多内容

      IMAGE

      STSW-IO-LINK
      STSW-IO-LINK
      IO-Link demonstration kit firmware
      批量生产
      -
      软件
      产品型号 Software Version 供货状态 供应商 下载
      STSW-IO-LINK 1.1.1 Active ST
      STEVAL-IDP004V1

      Description:

      IO-Link master multi-port evaluation board based on L6360

      价格 (US$)*

      123.73

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      显示较多内容

      STEVAL-IDP003V1

      Description:

      IO-Link industrial modular sensor board based on L6362A

      价格 (US$)*

      106.58

      Key features

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      显示较多内容

      STSW-IO-LINK

      Description:

      IO-Link demonstration kit firmware

      价格 (US$)*

      -
      软件

      Key features

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      显示较多内容

      IMAGE

      STSW-IO-LINK
      产品型号 Software Version 供货状态 供应商 下载
      STSW-IO-LINK 1.1.1 Active ST

产品型号 供货状态 封装 等级规格 符合RoHS级别 材料声明**
L6360
批量生产
VFDFPN 26 3.5x5 Industrial Ecopack2
L6360TR
批量生产
VFDFPN 26 3.5x5 Industrial Ecopack2

L6360

Package:

VFDFPN 26 3.5x5

Material Declaration**:

PDF XML

Marketing Status

批量生产

Package

VFDFPN 26 3.5x5

Grade

Industrial

RoHS Compliance Grade

Ecopack2

L6360TR

Package:

VFDFPN 26 3.5x5

Material Declaration**:

PDF XML

Marketing Status

批量生产

Package

VFDFPN 26 3.5x5

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持