-
In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications.
The device is intended to drive two power MOSFETS, in the classical half bridge topology, ensuring all the features needed to drive and properly control a fluorescent bulb.
A dedicated timing section in the L6574 allows the user set the necessary parameters for proper preheat and ignition of the lamp.
Also, an OP AMP is available to implement closed loop control of the lamp current during normal lamp burning.
An integrated bootstrap section, eliminating the normally required bootstrap diode and the zener clamping on Vs, makes the L6574 well suited for low cost applications where few additional components are needed to build a high performance ballast.主要特性
- HIGH ACCURACY CURRENT CONTROLLED OSCILLATOR
- SENSE OP AMP FOR CLOSED LOOP CONTROL OR PROTECTION FEATURES
- CLAMPING ON VS.
- INTEGRATED BOOTSTRAP DIODE
- SO16, DIP 16 PACKAGES
- UNDER VOLTAGE LOCK OUT
- CMOS SHUT DOWN INPUT
- HIGH VOLTAGE RAIL UP TO 600V
- DRIVER CURRENT CAPABILITY:
250mA SOURCE 450mA SINK\t - dV/dt IMMUNITY O± 50 V/ns IN FULL TEMPERATURE RANGE
- WITH 1nF LOAD
- PREHEAT AND FREQUENCY SHIFTING TIMING
- SWITCHING TIMES 80/40ns RISE/FALL
精选 视频
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| L6574 | 批量生产 | PDIP 16 | Industrial | Ecopack2 | |
| L6574D | 批量生产 | SO-16 | Industrial | Ecopack2 (**) | |
| L6574D013TR | 批量生产 | SO-16 | Industrial | Ecopack2 (**) |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。
