-
The ST1S32 is an internally compensated 1.5 MHz fixed-frequency PWM synchronous step-down regulator. The ST1S32 operates from 2.8 V to 5.5 V input, while it regulates an output voltage as low as 0.8 V and up to VIN.
The ST1S32 integrates a 60 mΩ high-side switch and a 45 mΩ synchronous rectifier, allowing very high efficiency with very low output voltages.
The peak current mode control with internal compensation delivers a very compact solution with a minimum component count.
The ST1S32 is available in 4 mm x 4 mm, 8-lead VFDFPN package.Key Features
- 4 A DC output current
- 2.8 V to 5.5 V input voltage
- Output voltage adjustable from 0.8 V
- 1.5 MHz switching frequency
- Internal soft-start and enable
- Integrated 60 mΩ and 45 mΩ Power MOSFETs
- All ceramic capacitor
- Power Good (POR)
- Cycle-by-cycle current limiting
- Current foldback short-circuit protection
- VFDFPN 8 4x4x1.0 package
精选 视频
评估工具
-
-
Picture Part number 制造商 描述 
STEVAL-ISA068V1 -- 4 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S32 in DFN 4x4 package 产品型号4 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S32 in DFN 4x4 package
-
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | Material Declaration** |
|---|---|---|---|---|---|
| ST1S32PUR |
批量生产
|
DFN8 4x4 | 工业 | Ecopack2 |
|
ST1S32PUR
Package:
DFN8 4x4Material Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
