Product overview
描述
The STCF05 is a high efficiency power supply solution to drive multiple flash LEDs in camera phones, PDAs and other hand-held devices. The synchronous boost topology with output current control guarantees the proper LED current over all possible conditions of battery level and LED forward voltage. All the functions of the device are controlled through the I²C bus that allows to reduce logic pins on the package and to save PCB traces on the board. Hard and soft-triggering of the flash are both supported. The device includes many functions to protect the chip and the power LEDs. These comprehend a soft-start control, chip over temperature detection and protection, open and shorted LEDs detection and protection. In addition, a digital programmable time-out function protects the LEDs in case of wrong command from microprocessor. See description (continued).-
All features
- Boost DC-DC converter with synchronous rectification
- Drives 2 power white LEDs in series with a current up to 400 mA
- Input voltage range 2.5 V to 5.5 V
- Needs 3 external components only
- Output current control
- 1.8 MHz fixed frequency PWM control
- Peak inductor current limited to 3 A
- Full I²C control
- Operational modes:
- Standby mode
- Standby mode with NTC
- Flash mode: up to 400 mA
- Torch mode: up to 120 mA
- Soft and hard triggering of flash
- Flash and Torch dimming in 15 exponential steps
- Dimmable red LED indicator auxiliary output
- Internally or externally timed flash operation
- Digitally programmable safety time-out in flash mode
- LED overtemperature detection and protection with external NTC resistor
- Open and shorted LED failure detection and protection
- Chip overtemperature detection and protection
- Less than 1 μA standby current
- Package 3 x 3 mm TFBGA25
电路原理图
精选 视频
All resources
Resource title | Latest update |
---|
产品规格 (1)
Resource title | Latest update | |||
---|---|---|---|---|
19 Sep 2016 |
19 Sep 2016
|
应用手册 (1)
Resource title | Latest update | |||
---|---|---|---|---|
28 Feb 2020 |
28 Feb 2020
|
手册 (1)
Resource title | Latest update | |||
---|---|---|---|---|
23 Nov 2020 |
23 Nov 2020
|
EDA Symbols, Footprints and 3D Models
质量与可靠性
产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
---|---|---|---|---|---|
STCF05TBR |
批量生产
|
uTFBGA 25 3x3x1.1 | 工业 | Ecopack1 |
|
STCF05TBR
Package:
uTFBGA 25 3x3x1.1Material Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持 。