产品概述
描述
The STWBC-EP is the digital controller for the wireless battery charger (WBC) transmitters (TX) from STMicroelectronics optimized for Extended Power Profile (EPP) Wireless Power Consortium (WPC) 1.2 certified applications up to 15 W. It offers the most flexible and efficient solution for controlling the power transfer to a receiver (RX) in WBC-enabled applications such as smartphones, tablets and other battery-powered devices that use the electromagnetic induction for recharging.The TX is responsible for controlling the transmitting coil and generating the correct amount of power requested by the RX. The RX continuously provides the transmitter with the correct power level requested, by modulating the transmitter carrier through the controlled resistive or capacitive load. Generating the correct amount of power ensures the highest level of end-to-end efficiency due to reduced energy losses. It also helps maintaining a lower operational temperature.
The TX can adapt to the amount of energy transferred by the coil by modulating the frequency, duty cycle or amplitude of the PWM voltage on the transmitting coil.
The STWBC-EP is capable of bidirectional communication with the RX as specified by the WPC 1.2 protocol.
-
所有功能
- Digital controller for wireless battery charger transmitter
- 15 W single coil inductive transmitters optimized for:
- Cell phones and smartphones
- Tablets and phablets
- Charging accessories
- Support for Wireless Power Consortium (WPC) 1.2 EPP 15 W certified applications
- Backward compatible with 5 W WPC 1.1 applications
- Support for half bridge topology with DC/DC
- VIN range: 3 V to 5.5 V
- Supports USB Vin
- Active presence detector
- Foreign object detection
- Q-factor measurement
- Parametric customization via GUI
- Turnkey firmware solution
- Peripherals
- 10-bit ADC
- UART interface
- I2C master fast/slow speed rate
- GPIOs
- Memory
- Flash and EEPROM with read-while-write (RWW) and Error Correction Code (ECC)
- Program memory: 32-Kbyte Flash; data retention: 20 years at 55 °C after 1000 cycles at 55 °C
- Data memory: 1 Kbyte true data EEPROM; data retention: 20 years at 55 °C after 1000 cycles at 85 °C
- RAM: 6 Kbytes
- Transmitter reference design:
- WPC Qi 1.2.3 certified
- MP-A10 single coil 15 W topology
- Evaluation board order code: STEVAL-ISB044V1
- 2-layer PCBs
- Active object detection
- Graphical User Interface for application monitoring
- Operating temperature: -40 °C up to 105 °C
- Package: VFQFPN32 - 5 x 5mm
您可能还会喜欢...
精选 视频
特别推荐
All tools & software
EDA符号、封装和3D模型
质量与可靠性
产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
---|---|---|---|---|---|
STWBC-EP | NRND | VFQFPN 32 5x5x1.0 mm | 工业 | Ecopack2 | |
STWBC-EPTR | NRND | VFQFPN 32 5x5x1.0 mm | 工业 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持。
样片和购买
产品型号 | 从分销商订购 | 从ST订购 | 供货状态 | ECCN (US) | ECCN (EU) | 包装类型 | 封装 | 温度(ºC) | 等级规格 | Country of Origin | Output Power (W) (typ) | Budgetary Price (US$)*/Qty | 更多信息 | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
最小值 | 最大值 | ||||||||||||||
STWBC-EP | 无法联系到经销商,请联系我们的销售办事处 | NRND | 3A991.a.2 | NEC | Tray | VFQFPN 32 5x5x1.0 mm | -40 | 105 | Industrial | CHINA | 15 | | |||
STWBC-EPTR | 无法联系到经销商,请联系我们的销售办事处 | NRND | 3A991.a.2 | NEC | Tape And Reel | VFQFPN 32 5x5x1.0 mm | -40 | 105 | Industrial | CHINA | 15 | |