-
The VNI4140K-32 is a monolithic device made using STMicroelectronics VIPower technology, intended to drive four independent resistive, capacitive or inductive loads with one side connected to ground. Active current limitation avoids the system power supply dropping in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. In overload conditions, the channel turns OFF and back ON automatically so to maintain junction temperature between TTSD and TR. If this condition causes case temperature to reach TCSD, the overloaded channel is turned OFF and restarts only when case temperature has decreased down to TCR. In case of more than one channel in overload, restart of the overloaded channels is not simultaneous, in order to avoid high peak current from the supply. Non-overloaded channels continue operating normally. The open drain diagnostic outputs indicate overtemperature conditions.
主要特性
- Output current: 1 A per channel
- Shorted load protections
- Junction overtemperature protection
- Case overtemperature protection for thermal independence of the channels
- Thermal case shutdown restart not simultaneous for the various channels
- Protection against loss of ground
- Current limitation
- Undervoltage shutdown
- Open drain diagnostic outputs
- 3.3 V CMOS/TTL compatible inputs
- Fast demagnetization of inductive loads
- Conforms to IEC 61131-2
- ESD according to IEC 61000-4-2 up to +/-25 KV
精选 视频
The first ST intelligent power switch with galvanic isolation on chip
评估工具
-
-
Picture 产品型号 制造商 描述 
STEVAL-IFP019V1 -- Quad high-side smart-power solid-state relay demonstration board based on the VNI4140K-32 产品型号Quad high-side smart-power solid-state relay demonstration board based on the VNI4140K-32
-
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| VNI4140K-32 | 批量生产 | PowerSSO 24 | 工业 | Ecopack2 | |
| VNI4140KTR-32 | 批量生产 | PowerSSO 24 | 工业 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。
