产品概述
描述
The ST54H is an all-in-one solution including ST21NFCD NFC controller and ST33J2M0 Secure Element with the highest security level (EAL6+ and EMVCo certified hardware). Fully manufactured in a secure environment, the ST33J2M0 provides the highest performance levels thanks to its ARM® SC300® core.The 64-ball WFBGA (4 x 4 x 0.8 mm) ECOPACK® package provides a reduced footprint and pin-to-pin compatibility with the STMicroelectronics NFC standalone solution. There is no internal direct connection between the two devices inside the package.
A complete range of memory sizes up to 2048 Kbyte (depending on profile) of non-volatile Flash memory is available on the Secure Element.
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
-
所有功能
- NFC controller
- ARM® Cortex®-M3 microcontroller
- eFlash for full firmware update
- Enhanced Active load modulation technology
- Enhanced TX drive up to 1.3 W
- Compatible with extremely small or metal frame antennas
- Optimized power consumption modes
- Battery voltage monitoring
-
System clock
- FracN PLL input range from 13 to 76.8 MHz
- 27.12 MHz external crystal oscillator
- Automatic Wake-Up via communication interfaces, internal timers, GPIO, RF field or tag detection
- Support of an external DC/DC converter for TX supply
- RF communications
-
Active and passive Peer-to-Peer
- ISO/IEC 18092 - NFCIP-1 Initiator & Target
-
Passive mode – Reader/Writer
- NFC Forum Type 1/2/3/4/5 tags
- ISO/IEC 15693
- MIFARE® Classic
- Thinfilm (ex Kovio) Barcode
-
Active mode – Card Emulation
- ISO/IEC 14443 Type A & B
- JIS X 6319 – 4
- MIFARE® Classic(a)(b) through SWP-CLT
-
Active and passive Peer-to-Peer
- External communication interfaces
- Two SWP master interfaces up to 1.695 Mbit/s
- I2C slave interface up to 3.4 MHz
- Slave and master SPI interface up to 13 MHz
- HSUART interface up to 6 Mbit/s
- Secure Microcontroller
- ARM® SecurCore® SC300™ 32-bit RISC core
- 2048 Kbyte of Flash memory
- 50 Kbyte of RAM
- ISO/IEC 7816-3 interface
- Single wire protocol (SWP) Interface
- SPI master/slave interface
- Secure Operating System
-
Supports state of the art Secure Element operating systems:
- JavaCard™ 3.0.5
- GlobalPlatform™ 2.3 with Amdts
- EMVCo™ certification
-
Supports state of the art Secure Element operating systems:
- Electrical characteristics
- Battery voltage support from 2.4 V to 5 V
- I/O dedicated voltage level (VPS_IO) from 1.62 V to 3.3 V
- Supports Class B and C operating conditions for UICC
- Ambient operating temperature -25 to + 85 °C
- 应用
- Mobile devices
- Wearable devices
- SmartWatch
- Secure Connected Devices
- NFC controller
EDA符号、封装和3D模型
STMicroelectronics - ST54H
为您的应用下载所有EDA符号、封装和3D模型，加快您的设计速度。您可以从大量CAD格式中进行选择，以匹配您的设计工具链。
符号
封装
3D模型
质量与可靠性
| 产品型号 | Marketing Status | 封装 | 等级规格 | 符合RoHS级别 | 材料声明** |
|---|---|---|---|---|---|
| ST54H-BGA |
批量生产
|
WFBGA 4X4X0.8 64L 0.4 P STACKED | 工业 | N/A |
|
ST54H-BGA
Package:
WFBGA 4X4X0.8 64L 0.4 P STACKEDMaterial Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
