54VCXH162374   Product is in volume production.

Rad-Hard 16-bit D-Type Flip-Flop 3-state

下载数据手册

The 54VCXH162374 is a low voltage CMOS 16 bit d-type flip-flop with 3 state outputs non inverting fabricated with sub-micron silicon gate and five-layer metal wiring C²MOS technology. It is ideal for low power and very high speed 1.65 to 3.6 V applications; it can be interfaced to 3.6 V signal environment for both inputs and outputs. These 16 bit d-type flip-flops are controlled by two clock inputs (nCK) and two output enable inputs (nOE). On the positive transition of the (nCK), the nQ outputs will be set to the logic state that were setup at the nD inputs. While the (nOE) input is low, the 8 outputs (nQ) will be in a normal state (HIGH or LOW logic level) and while high level the outputs will be in a high impedance state. Any output control does not affect the internal operation of flip flops; that is, the old data can be retained or the new data can be entered even while the outputs are OFF.

主要特性

  • 1.65 to 3.6 V inputs and outputs
  • High speed:
    • tPD= 3.4 ns (Max.) at VCC = 3.0 to 3.6 V
    • tPD= 4.8 ns (Max.) at VCC = 2.3 to 2.7 V
  • Symmetrical impedance outputs:
    • |IOH| = IOL= 12 mA (Min.) at VCC= 3.0 V
    • |IOH| = IOL= 8 mA (Min.) at VCC= 2.3 V
  • Power down protection on inputs and outputs
  • 26 Ω serie resistors in outputs
  • Operating voltage range:
    • VCC(Opr) = 1.65 V to 3.6 V
  • Pin and function compatible with 54 series H162374
  • Bus hold provided on both sides
  • Cold spare function
  • Latch-up performance exceeds 300 mA (JESD 17)
  • ESD performance:
    • HBM > 2000 V (MIL STD 883 method 3015); MM > 200 V
  • 300 KRad Mil1019.6 condition A, (RHA QML qualification extension undergone)
  • No SEL, no SEU and no SET under 110 Mev/cm2/mg LET heavy ions irradiation
  • QML qualified product
  • Device fully compliant with DSCC SMD 5962-05212
  • 100 mV typical input hysteresis

资源

技术文档

产品规格
Description 版本 文档大小
DS3955 DS3955: Rad hard low voltage CMOS 16-bit d-type flip-flop (3-state) with 3.6 V tolerant inputs and outputs 7.1 491 KB
Technical Notes & Articles
Description 版本 文档大小
TN1190 TN1190: Additional 100 krad specification for M54HCxx and M54HCTxx series products 2.3 182 KB
TN1181 TN1181: Engineering Model quality level 2.1 371 KB
TN0985 TN0985: “Class S equivalent” for CMOS4000B and 54HCMOS series 7.0 819 KB

出版刊物和宣传资料

选型指南
Description 版本 文档大小
Aerospace and Hi-rel - ESCC, JANS & QML products 1.0 2 MB
支持和社区

样片和购买

型号 Marketing Status SMD PIN/Detailed Spec Quality Level EPPL Other (comments) Hi-Rel Package Lead Finish Packing Type Package: Product Marking Mass (gr) ECCN (US) Country of Origin More info Order from ST Order from Distributors
RHRXH162374K1 NRND - Engineering Model - - Flat-48 Gold Carrier Tape RHRXH162245K1 1.5 EAR99 - MORE INFO No availability reported, please contact our Sales office
RHFXH162374K03V Active 5962F0521202VXC QML-V Flight true - Flat-48 Gold Carrier Tape 5962F0521202VXC 1.5 EAR99 FRANCE MORE INFO No availability reported, please contact our Sales office
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

质量和可靠性

型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
RHRXH162374K1 NRNDFLAT CER MILIndustrialN/A
RHFXH162374K03V ActiveFLAT48 FPIndustrialN/A
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

All rights reserved © 2018 STMicroelectronics
使用条款 | Sales Terms & Conditions | 保密协议 | 联系方式

京ICP备14016349号-2

×