ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

Key Features

  • 5 V power supplied by a USB connector
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable
  • SWIM specific features
    • 1.65 V to 5.5 V application voltage supported on SWIM interface
    • SWIM low-speed and high-speed modes supported
    • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
    • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
    • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
    • JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

画像

×

デザイン

技術文書

製品スペック
Description バージョン サイズ
DB1275 DB1275: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 4.0 201 KB
ユーザマニュアル
Description バージョン サイズ
UM1075 UM1075: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 7.0 658 KB

ハードウェアリソース

Bill of Materials
Description バージョン サイズ
ST-LINK/V2 BOM B-01 12 KB
ST-LINK/V2-ISOL BOM B-03 12 KB

法務

ライセンス契約
Description バージョン サイズ
Evaluation products license agreement 1.0 125 KB

ツール & ソフトウェア

ソフトウェア製品
Development Tool Software
サポート & コミュニティ
関連製品

サンプル & 購入

製品型番 General Description Specific features RoHS Compliance Grade Marketing Status Unit Price (US$) * Material Declaration 数量 Third Party link More info Order from ST Order from Distributors
ST-LINK/V2-ISOL ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 With digital isolation Ecopack1 Active 77.18 - 1 - MORE INFO 直接購入 買い物かごに追加 DISTRIBUTOR AVAILABILITY
ST-LINK/V2 ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 - Ecopack1 Active 20.83 - 1 - MORE INFO 直接購入 買い物かごに追加 DISTRIBUTOR AVAILABILITY
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

品質 & 信頼性

製品型番 Marketing Status パッケージ Grade RoHS Compliance Grade Material Declaration**
ST-LINK/V2-ISOL アクティブCARDIndustrialEcopack1
ST-LINK/V2 アクティブCONTRACTSIndustrialEcopack1
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×