Product overview
Description
The ST7540 is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V. The device operation is controlled by means of an internal register, programmable through the synchronous serial interface. Additional functions as watchdog, clock output, output voltage and current control, preamble detection, time-out and band in use are included. Realized in Multipower BCD5 technology that allows to integrate DMOS, Bipolar and CMOS structures in the same chip.
-
All features
- Programmable baud rate up to 4800BPS
- 8 Programmable transmission frequencies
- Suitable for applications in accordance with EN 50065 Cenelec specification
- Receiving sensitivity up to 250µVRMS
- Band in use detection
- Carrier or preamble detection
- Watchdog timer
- Programmable control register
- 8 or 16 Bit header recognition
- Integrated 3.3V voltage regulator (up to 50mA) with short circuit protection
- Integrates 5V voltage regulator (up to 50mA) with short circuit protection
- Half-duplex frequency shift keying (FSK) transceiver
- Programmable mains access:
Synchronous Asynchronous - Integrated power line driver with programmable voltage and current control
- Very low power consumption (Iq = 5mA)
- 3.3V or 5V digital supply
- UART/SPI host interface
- Single supply voltage (from 7.5V up to 13.5V)
- ST7537 and ST7538 compatible
EDA Symbols, Footprints and 3D Models
STMicroelectronics - ST7540
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
Symbols
Footprints
3D models