Skip to main content
Products

Search History

Bookmark

Please   to show your saved searches.

Skip to main content

VIPER0P
Active
Education Design Win
VIPerPlus family: Zero-power off-line high voltage converter

Save to myST
Download datasheet
Order Direct

Product overview

Description

The device is a high-voltage converter that smartly integrates an 800 V avalanche rugged power MOSFET with PWM current-mode control. The power MOSFET with 800 V breakdown voltage allows extended input voltage range to be applied, as well as to reduce the size of the DRAIN snubber circuit. This IC is capable of meeting the most stringent energy-saving standards as it has very low consumption and operates in pulse frequency modulation under light load. The Zero-Power mode (ZPM) feature enables the IC to work in an idle state, where the system is totally shutdown. An MCU can be easily connected to the IC for smart ZPM management and it can be supplied by the IC itself during the idle state. The design of flyback, buck and buck boost converters is supported. The integrated HV startup, sense FET, error amplifier and oscillator with jitter allow a complete application to be designed with a minimum component count. In flyback non isolated topology, a negative output voltage is easily set thanks to the integrated error amplifier with separate ground.

  • All features

    • Smart stand-by architecture using the Zero Power Mode (ZPM)
    • ZPM management by MCU easily realizable
    • 800 V avalanche-rugged power MOSFET allowing ultra wide VAC input range to be covered
    • Embedded HV startup and sense-FET
    • Current mode PWM controller
    • Drain current limit protection (OCP)
    • Wide supply voltage range: 4.5 V to 30 V
    • Self-supply option allows to remove the auxiliary winding or bias components
    • Minimized system input power consumption:
      • Less than 4 mW @ 230 VAC in ZPM
      • Less than 10 mW @ 230 VAC in no-load condition
      • Less than 400 mW @ 230 VAC with 250 mW load
    • Jittered switching frequency reduces the EMI filter cost
      • 60 kHz ±7% (type L)
      • 120 kHz ±7% (type H)
    • Embedded E/A with 1.2 V reference and separate ground for easy negative voltage setting
    • Protections with automatic restart: overload/short circuit (OLP), max. duty cycle counter, VCC clamp
    • Pulse-skip protection to prevent flux-runaway
    • Embedded thermal shutdown
    • Built in soft start for improved system reliability
    Read more Read less

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:

Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
Solar Battery Charger

Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC

Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs

Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:

Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties

Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.

Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices

Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices

Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations

Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices

Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:

Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass

Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window

Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs

Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:

NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance

NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate

NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

Recommended for you

EDA Symbols, Footprints and 3D Models

STMicroelectronics - VIPER0P

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

Symbols

Footprints

Footprints

3D model

3D models

All resources

Expand all categories
Available documentation resources
Resource title
Version
Latest update
Actions Details Download

SPICE models (1)

Resource title
Version
Latest update
Actions Options
VIPer0P PSpice models
1.0 13 Jan 2016
ZIP
13 Jan 2016
VIPer0P PSpice models 1.0

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Longevity Commitment Longevity Starting Date Material Declaration**
VIPER0PHD
Active
SO-16 Industrial Ecopack2 - -
VIPER0PHDTR
Active
SO-16 Industrial Ecopack2 - -
VIPER0PLD
Active
SO-16 Industrial Ecopack2 - -
VIPER0PLDTR
Active
SO-16 Industrial Ecopack2 - -

VIPER0PHD

Package:

SO-16

Material Declaration**:

More Info

Marketing Status

Active

Package

SO-16

Grade

Industrial

RoHS Compliance Grade

Ecopack2

VIPER0PHDTR

Package:

SO-16

Material Declaration**:

More Info

Marketing Status

Active

Package

SO-16

Grade

Industrial

RoHS Compliance Grade

Ecopack2

VIPER0PLD

Package:

SO-16

Material Declaration**:

PDF XML
More Info

Marketing Status

Active

Package

SO-16

Grade

Industrial

RoHS Compliance Grade

Ecopack2

VIPER0PLDTR

Package:

SO-16

Material Declaration**:

PDF XML
More Info

Marketing Status

Active

Package

SO-16

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- VIPER0P

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.