STEVAL-IHP002V2Smartplug system to measure and control AC loads based on the STM32, ST7540 PLM and STPM01
The STEVAL-IHP002V2 demonstration board implements a PLM smartplug node which allows monitoring the energy consumption of a mains plug and controlling any kind of load in on/off mode through a relay.
The board is based on the STM32F103CB microcontroller, the ST7540 PLM module and the STPM01 mono-phase energy metering IC.
The board is designed to fit a standard "503" wall box.
The voltage, current, power, active energy and the output status can be sent to a PLM data concentrator through a power line communication network on request. Moreover, if the power consumption changes, it is sent asynchronously to the data concentrator.
- Energy measurement by the STPM01
- Power line communication by the ST7540 up to 4.8 kbps
- USART connectivity or expansion connector
- Output with two contacts (NO/NC) and common contact for generic load
- Designed to fit a standard "503" wall box
- RoHS compliant
DB1438: Smartplug system to measure and control AC loads based on the STM32, ST7540 PLM and STPM01
UM1458: STEVAL-IHP002V2: PLM smartplugV2 hardware
UM1459: STEVAL-IHP002V2: PLM smartplugV2 firmware
Board Manufacturing Specification
STEVAL-IHP002V2 gerber files
Bill of Materials
Sample & BuyTop
|Part Number||Marketing Status||Core Product||Order From ST||Unit Price (US$)*|
|Distributor Availability||RoHS Compliance Grade||Download
|STEVAL-IHP002V2||Active||STM32; ST7540; STPM01||-||No availability reported, please contact our Sales office||Ecopack2||-|
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.