Skip to main content
Products

Search History

Bookmark

Please   to show your saved searches.

Skip to main content

CR95HF
NRND
Design Win
13.56-MHz multi-protocol contactless transceiver IC with SPI and UART serial access

Save to myST
Download datasheet
Order Direct

Product overview

Description

The CR95HF is an integrated transceiver IC for contactless applications.

The CR95HF manages frame coding and decoding in Reader mode for standard applications such as near field communication (NFC), proximity and vicinity standards.

The CR95HF embeds an Analog Front End to provide the 13.56 MHz Air Interface.

The CR95HF supports ISO/IEC 14443 Type A and B, ISO/IEC 15693 (single or double subcarrier) and ISO/IEC 18092 communication protocols.

The CR95HF also supports the detection, reading and writing of NFC Forum Type 1, 2, 3 and 4 tags.

  • All features

    • CR95HF belongs to the ST25 family which includes all ST’s NFC/RFID tag and reader products
    • Operating modes supported:
      • Reader/Writer
    • Hardware features
      • Dedicated internal frame controller
      • Highly integrated Analog Front End (AFE) for RF communications
      • Transmission and reception modes
      • Optimized power management
      • Tag Detection mode
    • RF communication @13.56 MHz
      • ISO/IEC 14443 Type A and B
      • ISO/IEC 15693
      • ISO/IEC 18092
      • MIFARE® Classic compatible 12
    • Communication interfaces with a Host Controller
      • Serial peripheral interface (SPI) Slave interface
      • Universal asynchronous receiver/transmitter (UART)
      • Up to 528-byte command/reception buffer (FIFO)
    • 32-lead, 5x5 mm, very thin fine pitch quad flat (VFQFPN) ECOPACK®2 package
    Read more Read less

Circuit Diagram

Download

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:

Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
Solar Battery Charger

Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC

Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs

Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:

Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties

Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.

Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices

Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
• test

Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations

Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices

Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:

Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass

Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window

Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs

Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:

NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance

NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate

NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

Featured Products

NFC readers

Discover our full range of RFID NFC readers with multiprotocol support for 13.56 MHz, such as ISO 14443 Type A or B, ISO 15693, ISO 18092, ISO 18000-62/63, ISO 29143, FeliCa and NFC Forum protocols.

You might also like...

STSW-ST25PC001

Windows® PC software for ISO15693, ISO14443-A/B, NFC and industrial readers

RFid click

Compact 13.56 MHz multi-protocol RFID reader/writer with selectable UART or SPI interface

X-CUBE-NFC3

13.56 MHz multi-protocol contactless transceiver IC software expansion for STM32Cube

EDA Symbols, Footprints and 3D Models

STMicroelectronics - CR95HF

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

Symbols

Footprints

Footprints

3D model

3D models

All resources

Expand all categories
Available documentation resources
Resource title
Version
Latest update
Actions Details Download

Schematic Pack (1)

Resource title
Version
Latest update
Actions Options
Gerber files for CR95HF transceiver
1.0 01 Aug 2015
ZIP
01 Aug 2015
Gerber files for CR95HF transceiver 1.0

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Longevity Commitment Longevity Starting Date Material Declaration**
CR95HF-VMD5T
NRND
VFQFPN 32 5x5x1.0 mm Industrial Ecopack2 - -

CR95HF-VMD5T

Package:

VFQFPN 32 5x5x1.0 mm

Material Declaration**:

PDF XML
More Info

Marketing Status

NRND

Package

VFQFPN 32 5x5x1.0 mm

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- CR95HF

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.