Bluetooth Low Energy System On Chip

The BlueNRG-1 is a very low power Bluetooth low energy (BLE) single-mode system-on-chip, compliant with Bluetooth specification.

The BlueNRG-1 extends the features of award-winning BlueNRG network processor, enabling the usage of the embedded Cortex M0 for running the user application code.

The BlueNRG-1 includes 160 KB of programming Flash memory, 24 KB of static RAM memory with retention (two 12 KB banks) and SPI, UART, I²C standard communication interface peripherals. It also features multifunction timers, watchdog, RTC and DMA controller.

An ADC is available for interfacing with analog sensors, and for reading the measurement of the integrated battery monitor. A digital filter is available for processing a PDM stream.

The BlueNRG-1 offers the same excellent RF performance of the BlueNRG radio, and the integrated high efficiency DC/DC converter keeps the same ultra-low power characteristics, but the BlueNRG-1 improves the BlueNRG sleep mode current consumption allowing a further increase in the battery lifetime of the applications.

Key Features

  • Bluetooth specification compliant master, slave and multiple roles simultaneously, single-mode Bluetooth low energy system-on-chip
  • Operating supply voltage: from 1.7 to 3.6 V
  • Integrated linear regulator and DC-DC step-down converter
  • Operating temperature range: -40 °C to 105 °C
  • High performance, ultra-low power Cortex-M0 32-bit based architecture core
  • Programmable 160 KB Flash
  • 24 KB RAM with retention (two 12 KB banks)
  • 1 x UART interface
  • 1 x SPI interface
  • 2 x I²C interface
  • 14 or 15 GPIO
  • 2 x multifunction timer
  • 10-bit ADC
  • Watchdog & RTC
  • DMA controller
  • PDM stream processor
  • 16 or 32 MHz crystal oscillator
  • 32 kHz crystal oscillator
  • 32 kHz ring oscillator
  • Battery voltage monitor and temperature sensor
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent RF link budget (up to 96 dB)
  • Accurate RSSI to allow power control
  • 8.3 mA TX current (@ -2 dBm, 3.0 V)
  • Down to 1 µA current consumption with active BLE stack (sleep mode)
  • Suitable for building applications compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15, ARIB STD-T66
  • Pre-programmed bootloader via UART
  • QFN32, WCSP34 package option
  • Dedicated wettable flank QFN package for automotive grade qualification

Resources

Technical Documentation

Product Specifications
Description Version Size
DS11481 DS11481: Bluetooth® low energy wireless system-on-chip 3.0 5 MB
Application Notes
Description Version Size
AN4872 AN4872: BlueNRG-1 and BlueNRG-2 UART bootloader protocol 2.0 1 MB
AN4820 AN4820: BlueNRG-1 and BlueNRG-2 low power modes 2.0 745 KB
AN4869 AN4869: BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade 2.0 2 MB
AN4818 AN4818: Bringing up the BlueNRG-1, BlueNRG-2 devices 5.0 1 MB
AN4819 AN4819: PCB design guidelines for the BlueNRG-1 device 1.0 2 MB
AN4392 AN4392: Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band 3.1 539 KB
AN4387 AN4387: Using the BlueNRG family transceivers under ETSI EN 300 328 in 2400 –2483.5 MHz band 3.0 4 MB
AN4378 AN4378: Using the BlueNRG family transceivers under FCC title 47 part 15 in the 2400 – 2483.5 MHz band 3.0 1 MB
User Manuals
Description Version Size
UM2211 UM2211: BLE-Sub1GHz development kit 1.1 1 MB
UM2058 UM2058: BlueNRG GUI SW package 5.0 1 MB
UM2109 UM2109: BlueNRG-1 ST-LINK Utility software description 2.0 1 MB
Programming Manuals
Description Version Size
PM0257 PM0257: BlueNRG-1, BlueNRG-2 BLE stack programming guidelines 2.0 1 MB
Design Notes & Tips
Description Version Size
DT0063 DT0063: Bluetooth Low-Energy network: time-stamping and sample-rate-conversion 1.0 206 KB
DT0068 DT0068: How to replace a low-speed wired connection using a BLE link 1.1 222 KB

Publications and Collaterals

Flyers
Description Version Size
BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1 714 KB

Tools and Software

Embedded Software
Evaluation Tool Software
Wireless Connectivity Software
Evaluation Tools
Solution Evaluation Tools
Support & Community
Featured Products

Sample & Buy

Part Number Package Packing Type Operating Temperature (°C) (min) Operating Temperature (°C) (max) Marketing Status Unit Price (US$) * Quantity ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
BLUENRG-132Y VFQFPN 5X5X1.0 32L WET FLK Tape And Reel -40 105 Evaluation - - 5A002A1A 5A992C - MORE INFO No availability reported, please contact our Sales office
BLUENRG-134 WLCSP MSL1 Tape And Reel -40 105 Active 1.81 1000 5A002A1A 5A992C - MORE INFO Get Sample Add to cart DISTRIBUTOR AVAILABILITY
BLUENRG-132 VFQFPN 5X5X1.0 32L WET FLK Tape And Reel -40 105 Active 1.88 1000 5A002A1A 5A992C - MORE INFO Get Sample Add to cart DISTRIBUTOR AVAILABILITY
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Quality & Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
BLUENRG-132Y EvaluationVFQFPN 5X5X1.0 32L WET FLKAutomotiveEcopack3 0 0
BLUENRG-134 ActiveWLCSP MSL1IndustrialN/A 0 0
BLUENRG-132 ActiveVFQFPN 5X5X1.0 32L WET FLKIndustrialEcopack3 0 0
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×