概要
ソリューション
HW評価ツール
リソース
Tools and Software
主要製品
Get Started

FOTA(Firmware Over-The-air)サービスは、自動車に搭載されたどの電子制御ユニット(ECU)についてもファームウェアのダウンロードやアップデートを可能にします。自動車のECUが増加する中、車載システムおよびコンポーネントからの診断/処理データを共有することは、自動車メーカーがリコール費用を削減し、製品の品質や処理効率を高め、販売後に車両の性能強化や機能強化を実施する上で有効と考えられます。

アップデートにはサイバー攻撃に対する復元力が求められます。サイバーセキュリティが最も重要です。

STは、幅広いテレマティクス・プロセッサ、32bitマイクロコントローラ、セキュア・エレメントを提供して、最高レベルのセキュリティを確保するとともに、自動車を悪意ある攻撃から保護できるように支援しています。

製品型番
概要
SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool Quick view

主な特徴

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

さらに表示

SPC58NG-DISP Discovery Kit for SPC58NG - G line Quick view

主な特徴

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
SPC58EC-DISP Discovery Kit for SPC58EC - C line Quick view

主な特徴

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL-L5963Q L5963Q evaluation board Quick view

主な特徴

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

さらに表示

SPC582B-DIS Discovery Kit for SPC582 B line Quick view

主な特徴

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL-L5963 L5963 Evaluation board Quick view

主な特徴

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

さらに表示

注目リソース

Schematics Gerber
STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

主な特徴

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

主な特徴

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

さらに表示

製品型番
SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

主な特徴

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

さらに表示

SPC58NG-DISP

Discovery Kit for SPC58NG - G line

主な特徴

  • Featuring SPC58NG84E7, a 32-bit Power Architecture® triple core e200z4, 6MB flash in eLQFP176 package. Device designed to meet ASIL-D safety level and embeds an HSM with 128KB flash memory.
  • 2 Ethernet ports
  • 1 CAN FD port (DB9 connector)
  • JTAG interface (14 pin - 2x7 connector)
  • 2 Push buttons, 4 LEDs for user purposes, reset push button
  • Board Supply: 12 VDC (external power supply)
  • Connector suitable for TFT LCD module
  • Board size 145 x 105 mm

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
SPC58EC-DISP

Discovery Kit for SPC58EC - C line

主な特徴

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL-L5963Q

L5963Q evaluation board

主な特徴

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

さらに表示

SPC582B-DIS

Discovery Kit for SPC582 B line

主な特徴

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
EVAL-L5963

L5963 Evaluation board

主な特徴

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

さらに表示

注目リソース

Schematics Gerber
STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

主な特徴

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

主な特徴

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

さらに表示

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN4869
      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade
      5.1
      1.02 MB
      PDF
      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN4869

      The BlueNRG-1, BlueNRG-2 BLE OTA (over-the-air) firmware upgrade

    • 概要 バージョン サイズ アクション
      TN0897
      ST SPI protocol
      2.3
      421.19 KB
      PDF
      TN0897

      ST SPI protocol

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

関連資料

    • 概要 バージョン サイズ アクション
      A698x family High-performance automotive synchronous DC-DC converters 1.0
      250.39 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.1
      611.1 KB
      PDF
      Automotive multichannel power management ICs 1.0
      620.88 KB
      PDF
      Processor for Telematics and Connectivity 1.0
      5.69 MB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      795.07 KB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity 1.0
      641.98 KB
      PDF

      A698x family High-performance automotive synchronous DC-DC converters

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      Processor for Telematics and Connectivity

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity

    • 概要 バージョン サイズ アクション
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      578.99 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      1.17 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • 概要 バージョン サイズ アクション
      Driving smart power in automotive 1.0
      1,014.42 KB
      PDF
      SPC58 C-line 1.0
      851.09 KB
      PDF

      Driving smart power in automotive

      SPC58 C-line

設計ツール

    • 製品型番

      Smart Selector for Micro 32bit Power Architecture products

開発ツール・ハードウェア

    • 製品型番

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

ソフトウェア製品

    • 製品型番

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

eDesignSuite

コンバータ

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

ダイオード(パワー・ショットキー & FERD)スマート・セレクタ

TVSスマート・セレクタ

Automotive Analog and Power

品名 概要
L5963 Dual monolithic switching regulator with LDO and HSD
品名
Dual monolithic switching regulator with LDO and HSD

Automotive Infotainment and Telematics

品名 概要
STA1385 Telemaco3P automotive family of telematics and connectivity microprocessor
品名
Telemaco3P automotive family of telematics and connectivity microprocessor

Automotive Microcontrollers

品名 概要
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
品名
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

パワー・マネージメント

品名 概要
A6985F 38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
A6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
A6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
品名
38 V 0.5 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current

Secure MCUs

品名 概要
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
品名
32bit ARM® SecurCore® SC300 optimized for M2M for car
サポート & フィードバック