L98GD8

量産中
Design Win

8-channel fully configurable MOSFET pre-driver complying with 12V, 24V, 48V battery systems

Download datasheet

製品概要

概要

The L98GD8 is an 8-channel MOSFET pre-driver configurable for low-side, high-side, peak and hold and H-Bridge load control. It is designed to comply with the requirements of automotive passenger vehicles with 12 V and 48 V battery systems, as well as automotive commercial vehicles with 24 V battery systems.

All outputs can be PWM controlled. Six outputs are capable of driving safety relevant loads. One output can be dedicated to the actuation of safety relevant loads requiring a dedicated enable pin (EN6).

The device offers the possibility of controlling two independent H-Bridges.

The device can also drive up to two loads requiring "peak & hold" control strategy.

The driver outputs are protected against short circuit condition.

The device protects the external MOS in case of an overcurrent event.

Each output provides full diagnostic information such as short to battery, short to ground and open-load. Each output status can be constantly monitored through dedicated SPI registers.

The voltage slew rate of the external transistors 1-8 is controlled during turn ON and turn OFF in order to improve EMI behavior.

A double, redundant, external disable source is available through DIS and NDIS pins in order to improve safety.

The device is configurable via SPI through a 32-bit protocol.

  • 特徴

    • AEC-Q100 qualified
    • 12 V, 24 V and 48 V battery systems compliance
    • 3.3 V and 5 V logic compatible I/O
    • 8-channel configurable MOSFET pre-driver
      • High-side (N-channel and P-channel MOS)
      • Low-side (N-channel MOS)
      • H-bridge (up to 2 H-bridge)
      • Peak & Hold (2 loads)
    • Operating battery supply voltage 3.8 V to 58 V
    • Operating VDD supply voltage 4.5 V to 5.5 V
    • Programmable gate charge/discharge currents for improving EMI behavior
    • Individual diagnosis for:
      • Short circuit to battery
      • Open load
      • Short circuit to ground
    • Highly flexible overcurrent sensing implementation
      • Possibility of monitoring external MOS drain to source voltage
      • Possibility of monitoring voltage on external shunt resistor
      • 64 programmable overcurrent thresholds independent for each channel
      • Ultra-fast output shutdown in case of overcurrent
    • Current limitation for H-Bridge configuration
    • 32-bit SPI protocol available for configuration and diagnostics
      • Failures latched even if they occur during diagnostics reading
      • Daisy chain operation
      • SDO protected against overvoltage
    • Safety features
      • Fast switch off redundant output disable by two external pins
      • Built In Self Test (BIST) for logic operation
      • Hardware Self Check (HWSC) for VDD5 overvoltage comparator
      • Configurable Communication Check (CC) watchdog timer available
      • Disable feedback by bi-directional pin
      • Highly redundant output monitoring by dedicated SPI registers
    • 10-bit ADC for battery and die temperature measurements available by SPI
    • VDD5 monitoring for over/under voltage
    • VPS (battery) monitoring for under voltage

EDAシンボル / フットプリント / 3Dモデル

STマイクロエレクトロニクス - L98GD8

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

EDAシンボル

Footprints

フットプリント

3D model

3Dモデル

品質 & 信頼性

製品型番 マーケティング・ステータス パッケージ グレード RoHSコンプライアンスグレード Longevity Commitment Longevity Starting Date 材料宣誓書**
L98GD8
量産中
TQFP 64 10x10x1.0 オートモーティブ Ecopack2 - -
L98GD8TR
量産中
TQFP 64 10x10x1.0 オートモーティブ Ecopack2 - -

L98GD8

Package:

TQFP 64 10x10x1.0

Material Declaration**:

PDF XML

Marketing Status

量産中

Package

TQFP 64 10x10x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L98GD8TR

Package:

TQFP 64 10x10x1.0

Material Declaration**:

PDF XML

Marketing Status

量産中

Package

TQFP 64 10x10x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

Loading...
Swipe or click the button to explore more details Don't show this again
製品型番
製品ステータス
Budgetary Price (US$)*/Qty
STから購入
Order from distributors
パッケージ
梱包タイプ
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Operating temperature (°C)
最小
最大
L98GD8
Available at distributors

販売代理店在庫 L98GD8

販売代理店
地域 在庫 最小発注数量 パートナー企業リンク

販売代理店在庫データ:

販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください

L98GD8TR
Available at distributors

販売代理店在庫 L98GD8TR

販売代理店
地域 在庫 最小発注数量 パートナー企業リンク

販売代理店在庫データ:

販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください

L98GD8 量産中

Budgetary Price (US$)*/Qty:
-
パッケージ:
梱包タイプ:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

製品型番:

L98GD8

Operating Temperature (°C)

最小:

最大:

販売代理店

販売代理店在庫データ:

L98GD8TR 量産中

Budgetary Price (US$)*/Qty:
-
パッケージ:
梱包タイプ:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

製品型番:

L98GD8TR

Operating Temperature (°C)

最小:

最大:

販売代理店

販売代理店在庫データ:

Swipe or click the button to explore more details Don't show this again

(*)概算用の参考価格(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。