FDA802A
Active
Design Win
2x150 W/1x300 W class D digital input automotive power amplifier with diagnostics features and low voltage

Download databrief

Product overview

概要

The FDA802A is a dual bridge class D amplifier, designed in the most advanced BCD technology specially intended for car radio applications.

The FDA802A integrates a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared with the standard class AB.

The integrated D/A converter allows to reach outstanding performances (115 dB S/N ratio with 110 dB of dynamic range).

Thanks to the high-voltage MOSFET output stages it can operate both under standard car battery (6 -18 V) and under boosted power supply (up to 50 V) to reach the highest possible power with integrated solution.

The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently from the inductor and capacitor quality.

FDA802A is fully configurable through I2C bus interface and integrates a complete diagnostics array specially intended for automotive applications.

Thanks to the solutions implemented to solve the EMI problems, the device is intended to be used in the standard single DIN car-radio box together with the tuner.

Moreover FDA802A is able to work with power supply as low as 5.5 V, thus supporting the most recent low voltage ('start-stop') car-makers specification.

  • All features

    • AEC-Q100 qualified
    • Integrated 110 dB D/A conversion
    • I2S and TDM digital input (3.3/1.8 V)
    • Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
    • Full I2C bus driving (3.3/1.8 V) with 8 different I2C bus addresses
    • EMI control for FM/AM compatibility
    • EMI compliance evaluated following normative CISPR25 (class V)
    • Low radiation function (LRF)
    • Very low quiescent current
    • Output low-pass filter included in the feedback allowing outstanding audio performances
    • Wide operating supply range: target 5.5 V-50 V
    • Supply voltage monitoring on I2C
    • MOSFET power outputs allowing high output power capability under step-up voltage:
      • 2x120 W /4 Ω at 35 V, 1 kHz THD = 1%(2x150 W /4 Ω at 35 V, 1 kHz THD = 10%)
      • 2x140 W /8 Ω at 50 V, 1 kHz THD = 1%(2x180 W /8 Ω at 50 V, 1 kHz THD = 10%)
      • 2x270 W /8 Ω at 50 V max output power
    • Operation under standard car battery with high output power:
      • 2x22 W /4 Ω at 14 V, 1 kHz THD = 1%(2x28 W /4 Ω at 14 V, 1 kHz THD = 10%)
      • 2x37 W /2 Ω at 14 V, 1 kHz THD = 1%(2x46 W /2 Ω at 14 V, 1 kHz THD = 10%)
    • Possibility to drive 2 Ω loads:
      • up to 18 V in normal mode
      • up to 35 V in parallel mode
    • Independent channel operation
    • I2C bus diagnostics:
      • Short to VCC/GND diagnostic (including soft shorts up to 1 kΩ)
      • DC load diagnostic
      • AC load diagnostic (working both with internally generated and externally generated tone)
    • Integrated fault protection
    • Input and output offset detector
    • Clipping detector
    • Legacy mode ('no I2C' mode)
    • Short circuit and ESD integrated protections
    • Package: LQFP64 exposed pad up

EDA Symbols, Footprints and 3D Models

STMicroelectronics - FDA802A

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

Symbols

Footprints

Footprints

3D model

3D models

Quality and Reliability

Part Number Marketing Status Package Grade RoHSコンプライアンスグレード Longevity Commitment Longevity Starting Date Material Declaration**
FDA802A-VYT
Active
LQFP Automotive Ecopack2 - -
FDA802A-VYY
Active
LQFP Automotive Ecopack2 - -

FDA802A-VYT

Package:

LQFP

Material Declaration**:

PDF XML

Marketing Status

Active

Package

LQFP

Grade

Automotive

RoHS Compliance Grade

Ecopack2

FDA802A-VYY

Package:

LQFP

Material Declaration**:

PDF XML

Marketing Status

Active

Package

LQFP

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

Sample & Buy

Loading...
Part Number
製品ステータス
Budgetary Price (US$)*/Qty
STから購入
Order from distributors
Package
Packing Type
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Operating temperature (°C)
最小
最大
FDA802A-VYT

販売代理店在庫 FDA802A-VYT

販売代理店
地域 Stock 最小発注数量 パートナー企業リンク

販売代理店在庫データ:

販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください

FDA802A-VYY

販売代理店在庫 FDA802A-VYY

販売代理店
地域 Stock 最小発注数量 パートナー企業リンク

販売代理店在庫データ:

販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください

FDA802A-VYT Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

FDA802A-VYT

Operating Temperature (°C)

Min:

Max:

販売代理店

販売代理店在庫データ:

FDA802A-VYY Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

FDA802A-VYY

Operating Temperature (°C)

Min:

Max:

販売代理店

販売代理店在庫データ:

(*)概算用の参考価格(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。