製品概要
概要
The STCD22x0, STCD23x0 and STCD24x0 are 2, 3 or 4 output clock distribution circuits which accept external square wave or sine wave signals and output rail-to-rail (0 V to VTCXO) square wave signals. They are used to provide a common frequency clock to multimode mobile RF applications. They can also be used for those baseband peripheral applications in mobile phones such as WLAN, Bluetooth, GPS and DVB-H as the clock reference. The STCD22x0, STCD23x0 and STCD24x0 isolate each device driven by their clock outputs and minimize interference between the devices. Each of the clock buffers can be disabled to lower the power consumption whenever the connected device does not need the clock. The STCD22x0, STCD23x0 and STCD24x0 accept commonly used mobile master clock frequencies ranging from 10 MHz to 52 MHz.
-
特徴
- Option pins allow clock enable polarities to be user configurable (STCD22x0 and STCD24x0)
- Clock enable signal polarities factory programmable (STCD23x0)
- 2.5 V to 5.1 V battery supply voltage
- High isolation output-to-output & output-to-input
- Available in chip scale package (CSP)
- 40 pF max load driving capability per output
- Operating temperature : –20 °C to 85 °C
- Ultra-low phase noise and standby current
- No AC coupling capacitor needed
- 2, 3 or 4 output buffered clock distribution
- Rail-to-rail (0 V to VTCXO) square wave output
- Single-ended square wave (or sine wave) clock input
- 1.8 V, high PSRR LDO for external clock source voltage supply (VTCXO)
- Common system clock request, open drain, active low
- Individual enable pin for each output
EDAシンボル / フットプリント / 3Dモデル
STマイクロエレクトロニクス - STCD2400
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
EDAシンボル
フットプリント
3Dモデル