-
The X-NUCLEO-NFC03A1 (see Figure 1) is an NFC card reader evaluation board based on CR95HF / ST25R95-VMD5T to enable expansion of the STM32 Nucleo boards.
Both the CR95HF and ST25R95 devices manage frame coding and decoding in Reader mode for standard applications, such as NFC, proximity and vicinity standards. They embed an analog front end to provide the 13.56 MHz air interface.
These ICs support ISO/IEC 14443 Type A and B, ISO/IEC 15693 (single or double subcarrier) and ISO/IEC 18092 communication protocols, besides being MIFARE® Classic compatible1. They also support the detection, reading and writing of NFC Forum Type 1, 2, 3 and 4 tags.
The CR95HF / ST25R95 feature an optimized power management scheme, including tag detection mode.
The communication with the Host Controller is ensured through Serial Peripheral Interface (SPI) Slave or Universal Asynchronous Receiver/Transmitter (UART).
The X-NUCLEO-NFC03A1 is compatible with the ST Arduino™ UNO R3 connector pin assignment.主な特徴
- NFC (Near Field Communication) card reader evaluation board based on the CR95HF / ST25R95 devices, designed for expansion of STM32 Nucleo boards
- Reader/Writer modes supported
- 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB, and associated tuning circuit
- RF communication
- ISO/IEC 14443 (A and B)
- ISO/IEC 15693
- ISO/IEC 18092
- MIFARE® Classic compatible
- Equipped with Arduino™ UNO R3 connector
- Four general purpose LEDs
- Scalable solution, capable of cascading multiple boards for larger systems
- Free comprehensive development firmware library and examples for CR95HF / ST25R95, compatible with STM32Cube firmware
- FCC certified
- RoHS compliant
サンプル & 購入
| 製品型番 | Marketing Status | Board production status | Budgetary Price (US$)* | 数量 | ECCN (US) | Country of Origin | Order from Distributors | Order from ST |
|---|---|---|---|---|---|---|---|---|
| X-NUCLEO-NFC03A1 |
Active
|
Stock available | 15.0 | 1 | EAR99 | - | Check Availability | Buy direct |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
Guided tour into STM32 ODE and how it can help developers turn bright ideas into great products
The STM32 Open Development Environment is a flexible, easy and affordable way to develop innovative devices and applications. It is based on STM32 Nucleo boards and STM32Cube software.
ソフトウェア製品
-
-
写真 Part number 製造元 Description X-CUBE-NFC3 ST 13.56 MHz multi-protocol contactless transceiver IC software expansion for STM32Cube 製品型番13.56 MHz multi-protocol contactless transceiver IC software expansion for STM32Cube
-
評価ツール
-
-
写真 Part number 製造元 Description 
NUCLEO-F401RE ST STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity 
NUCLEO-L053R8 ST STM32 Nucleo-64 development board with STM32L053R8 MCU, supports Arduino and ST morpho connectivity 製品型番STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity
STM32 Nucleo-64 development board with STM32L053R8 MCU, supports Arduino and ST morpho connectivity
-
| 製品型番 | Marketing Status | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|
| X-NUCLEO-NFC03A1 |
Active
|
Ecopack2 |
|
X-NUCLEO-NFC03A1
Package:
Ecopack2Material Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
