STEVAL-PTOOL2V1

量産中
Design Win
MySTに保存する

Compact reference design for battery-operated brushless power tools based on STSPIN32F0252

データブリーフのダウンロード
Order Direct

製品概要

概要

The STEVAL-PTOOL2V1 BLDC driver reference design is tailored for battery-operated power tools using 8S to 15S battery packs. It is based on the STSPIN32F0252 motor controller with embedded 3-phase, 250 V gate driver and low-power STM32 MCU. The power stage is based on the STL130N8F7 power MOSFETs or any similarly rated device in a PowerFlat 5x6 package.

The board implements single shunt sensing topology with both field-oriented control

(FOC) and sensored or sensorless 6-step control supported for driving permanent magnet synchronous motors (PMSM) and brushless DC (BLDC) motors.

The companion 6-step STSW-PTOOL2V1 firmware is ready to use with position feedback from phase Hall-effect sensors.

This reference design can deliver up to 19 A continuous current with very good thermal dissipation performance thanks to the mounted heatsink. It is compatible with a wide input voltage range from 20 to 72 VDC, and includes an auxiliary power stage with the VIPER013 in buck configuration to generate +12V and +3.3V supply voltage required by the application.

The STEVAL-PTOOL2V1 features a potentiometer for speed variation and protection features include thermal shutdown, undervoltage lockout, and overcurrent protection.

This compact 80 mm x 58 mm design is ideal for power tools and any similar battery-operated applications in terms of architecture, rating and performance.

  • 特徴

    • Input voltage from 20 VDC to 72 VDC
    • Recommended for power tools supplied from 8S to 15S
    • Output current up to 19 Arms
    • Overcurrent threshold set to 36 A peak
    • STSPIN32F0252 featuring
      • 250 V, 1 A, 3-phase gate driver
      • SmartShutDown OCP
      • Cortex-M0 STM32
    • STL130N8F7 MOSFETs power stage featuring:
      • VDS = 80 V
      • RDS(on) max.= 3.6 mΩ
      • PowerFlat 5x6 package
    • Compact footprint (80 mm x 58 mm)
    • Heatsink for best power dissipation performance
    • Single shunt current sensing, suitable for:
      • Sensored or sensorless 6 step algorithm
      • Single-shunt vector (FOC) algorithm
    • Digital Hall sensors and encoder input
    • Plug-and-play thanks to available six-steps firmware with Hall-effect sensors feedback
    • Speed regulation through trimmer
    • Fully protected:
      • Thermal shutdown
      • Undervoltage lockout
      • Overcurrent protection
    • Bus voltage sensing
    • 12 V VCC and 3.3 V VDD supplies
    • Serial wire debug (SWD) port for debugging/programming
    • UART TX RX interface available
    • Easy user interface with buttons and trimmer
    続きを読む 一部を表示

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

パワー･マネージメント設計センター

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
パワー･マネージメント設計センター

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太陽光発電システム
パワー･マネージメント設計センター

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
パワー･マネージメント設計センター

デジタル電源ワークベンチ

• 電源部と制御ループの設計を段階的に最適化
• カスタム･アプリケーション用のSTM32Cube組み込みソフトウェア･パッケージを生成し、複数のSTM32 IDEと互換性のあるファームウェア･プロジェクトの生成が可能
パワー･マネージメント設計センター

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

おすすめ製品

Filters/EMI

EMC / Filter products to solve interferences

STSW-PTOOL2V1

Firmware for STEVAL-PTOOL2V1 BLDC motor control reference design board

すべてのリソース

すべてのカテゴリを表示
タイトル
バージョン
更新日

Board Manufacturing Specifications (1)

タイトル
バージョン
更新日
STEVAL-PTOOL2V1 GERBER
1.0 07 Oct 2020
07 Oct 2020
STEVAL-PTOOL2V1 GERBER 1.0

BOM (1)

タイトル
バージョン
更新日
STEVAL-PTOOL2V1 BOM
1.0 07 Oct 2020
07 Oct 2020
STEVAL-PTOOL2V1 BOM 1.0

Schematic Pack (1)

タイトル
バージョン
更新日
STEVAL-PTOOL2V1 SCHEMATIC
1.0 07 Oct 2020
07 Oct 2020
STEVAL-PTOOL2V1 SCHEMATIC 1.0

品質 & 信頼性

製品型番 マーケティング･ステータス パッケージ グレード RoHSコンプライアンスグレード WEEE Compliant Longevity Commitment Longevity Starting Date 材料宣誓書**
STEVAL-PTOOL2V1
量産中
CARD インダストリアル Ecopack2 はい - -

STEVAL-PTOOL2V1

Package:

CARD

Material Declaration**:

More Info

Marketing Status

量産中

Package

CARD

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。

製品

検索履歴

ブックマーク

Please log in  to show your saved searches.

▼
戻る
戻る
戻る

ご存知でしたか？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

STによるお客様のプロファイル情報の処理方法、またお客様がご自身の個人情報の保護に関する権利を行使する方法については、当社の プライバシー･ステートメント をご確認ください。

以下の製品のお知らせを受け取れます
- STEVAL-PTOOL2V1

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.