食洗機

検索履歴

ブックマーク

Please log in to show your saved searches.

概要

ソリューション

HW評価ツール

リソース

Tools and Software

主要製品

Get Started

クイックリンク

食器洗い機は、より効果的に食器を洗浄する一方、エネルギー、水、洗剤の消費量を抑え、しかも静音に動作する必要があります。さらに、こうした生活家電には、ホーム･オートメーションやクラウド/モバイル･アプリによる制御を可能にするため、通信などの複雑な機能がますます求められています。また、そうした機能をより簡単に利用できるように、使いやすいインタフェースも必要とされています。

STは、幅広いSTM32マイクロコントローラ、パワーMOSFET、IGBT、インテリジェント･パワー･モジュール（IPM）、トライアック、ACスイッチや、高電圧ゲート･ドライバ、さまざまなハードウェアとソフトウェアの評価･開発ツールを提供して、これらの生活家電で使用される各種モータ（3相ブラシレス、ユニバーサルなど）向けの効率的なモータ制御ソリューションの設計をサポートしています。

さらに、STが提供する先進的なMEMSモーション･センサおよび環境センサのポートフォリオや有線/無線通信ソリューションは、ネットワーク接続された効率的で使いやすい食器洗い機の設計上の課題解決に役立ちます。

High-temperature Triacs

Proximity Sensors

Humidity Sensors

Pressure Sensors

Temperature Sensors

Proximity Sensors

Standard Serial EEPROM

IGBTs

MOSFET and IGBT Gate Drivers

SLLIMM Intelligent Power Modules

製品型番	概要
STEVAL-IHM045V1	3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)	Quick view Key Features Wide-range input voltage (30-270 Vac) Maximum power up to 100 W at 230 Vac input Based on the STGIPN3H60A SLLIMM™-nano AC motor drive Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family Efficient DC-DC power supply (15 V, 3.3 V) DC bus voltage power supply connectors External 15 V input Dedicated connector for interfacing with the various other ST evaluation boards Suitable for sinusoidal FOC drives Selectable single or three-shunt current reading topology with fast operational amplifier Configurable for direct motor current sampling from shunt resistors Hardware overcurrent detecting network Temperature sensor Hall sensor/quadrature encoder inputs RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IHM032V1	150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control	Quick view Key Features Compact size Wide-range input voltage Maximum power up to 150 W at 230 Vac input STGD3HF60HD: 4.5 A, 600 V very fast IGBT Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example) AC or DC bus voltage power supply connectors Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost) Efficient DC/DC power supply (15 V, 3.3 V) Suitable both for sinusoidal FOC and trapezoidal BLDC drive Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents) Hardware overcurrent protection with boost capabilities Temperature sensor BEMF-detection network for BLDC drive Current regulation/limitation network for BLDC drive Hall sensor/quadrature encoder inputs さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA153V1	12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE	Quick view Key Features Universal input mains range: 90 – 265 V_AC frequency: 50 - 60 Hz Output voltage/current: 12 V/1.25 A (1.65 A peak) Very compact size Standby mains consumption: lower than 30 mW at 230 V_AC Minimum active mode efficiency: 81.55% Minimum active mode at 10% load efficiency: 71.55% EMI: in accordance with EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA171V1	12 V - 15 W quasi resonant flyback converter based on the VIPER35HD	Quick view Key Features Wide input voltage range: 90 V_AC to 264 V_AC Output voltage: 12 V Output current: 1.25 A Rated output power: 15 W Quasi resonant operation Input power standby @ 230 V_AC : < 30 mW Active mode efficiency: > 82% EMI: pre-compliance with EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA174V1	7 W dual output offline flyback converter for home appliances using VIPer0P	Quick view Key Features Zero-power input consumption ratified as per IEC62301 Clause 4.5 (P_{IN_ZPM} < 5 mW at 230 V_AC ) Negative output voltage easily set through the voltage divider Five-star energy efficiency when operating with no load (P_{IN_no_load} < 10 mW at 230 V_AC ) Meets ErP Lot 6 Tier 2 requirements for household and office equipment Meets European regulation 1275/2008 regarding eco-design requirements for standby and off-mode electric power consumption for household and office equipment Compliant with the ErP Lot 6 Tier 2 requirements in off-mode Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2 Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature VIPer0P 800 V avalanche rugged technology and its embedded protections ensure enhanced system reliability RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA184V1	5V/1.2A 12V/750mA double output flyback converter using VIPER37LD	Quick view Key Features Universal input mains range: 85 – 265 V_AC ; frequency: 50 – 60 Hz Output voltage 1: 5 V / 1.2 A Output voltage 2: 12 V / 0.75 A Very compact size Standby mains consumption: < 40 mW at 230 V_AC Average efficiency: > 75% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-MKI168V1	IIS2DH adapter board for a standard DIL 24 socket	Quick view Key Features Complete IIS2DH pinout for a standard DIL 24 socket Fully compatible with the STEVAL-MKI109V2 motherboard RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA178V1	5 V / 200 mA high voltage buck-converter based on VIPer01	Quick view Key Features Five-star energy efficiency for operation under no load (P_{IN_no_load} < 20 mW @ 230 V_AC ) Meets ErP Lot 6 Tier 2 requirements for household and office equipment Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2 Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature VIPer01 800V avalanche rugged technology and embedded protections ensure enhanced system reliability RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA182V1	8.4 W / 30 W peak power offline flyback converter using VIPER38HD	Quick view Key Features US input range: 85 – 132 V_AC , frequency: 50 – 60 Hz Output voltage / current: 12 V / 0.7 A (2.5 A peak) Very compact size Standby mains consumption: lower than 25 mW at 115 V_AC Min. active mode efficiency: 81.14% Min. active mode at 10% load efficiency: 71.14% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IHM036V1	Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B	Quick view Key Features Complete 100 W power inverter solution HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC Input inrush limiter based on NTC resistor Single shunt resistor current-sensing method Overtemperature and overcurrent hardware protection Compact and safe design Test points available to allow further evaluation RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IHM040V1	BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™	Quick view Key Features Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC Output current: 0.5 A_RMS to the motor Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM
STEVAL-ISA115V1	12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS	Quick view Key Features Universal input mains range: input voltage: 90 VAC - 264 VAC frequency: 45 Hz - 65 Hz Single-output voltage: 12 V @ 0.15 A continuous operation Standby mains consumption: < 50 mW @ 265 VAC Average efficiency: > 75% Fully protected against faults (overload, feedback disconnection and overheating) EMI: in accordance with EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IHM035V2	3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)	Quick view Key Features Nominal power: up to 100 W Compatible with 3.3 V and 5 V control board Single shunt resistor for current reading On-board temperature sensor Overcurrent protection with boost/disabling capability For six-step drives: Current limitation/regulation network BEMF detection network MC connector Compatible with sinusoidal and trapezoidal control RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA195V1	5 V / 0.36 A buck converter using VIPerPlus ? VIPer11	Quick view Key Features Universal AC main input voltage range: 85 V_AC to 265 V_AC Output range: 5 V / 0.36 A Rated output power: 1.8 W Input power in standby at 230 V_AC : less than 18 mW Active mode efficiency: > 65% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA196V1	5 V / 1.2 A non-isolated flyback converter using VIPerPlus?VIPer114LS	Quick view Key Features Universal AC main input voltage range: 85V_AC to 265V_AC Output voltage: 5 V Output current: 1.2 A Rated output power: 6 W No load input power @230 V_AC : < 10 mW Active mode efficiency: > 78% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA197V1	12 V, 7.8 W isolated flyback converter based on VIPer114LS	Quick view Key Features Universal input mains range: 90 – 265V_AC , frequency: 50 – 60 Hz Output voltage: 12 V Output current: 0.65 A Very compact size Stand-by mains consumption: < 20 mW at 230V_AC Average efficiency: > 81% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IPMNG3Q	300 W motor control power board based on STGIPQ3H60T-H SLLIMM™-nano IPM	Quick view Key Features Input voltage: from 125 to 400 V_DC Nominal power: up to 300 W Nominal current: up to 1.8 A Input auxiliary voltage: up to 20 V_DC Single- or three-shunt resistors for current sensing (with sensing network) Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU Overcurrent hardware protection IPM temperature monitoring and protection Hall sensor or encoder input IGBT intelligent power module: 2^nd series SLLIMM-nano IPM (STGIPQ3H60T-H – full molded package) Motor control connector (32 pins) interfacing with ST MCU boards Universal design for further evaluation with bread board and testing pins Very compact size RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA177V1	5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01	Quick view Key Features Universal AC main input voltage range: 85V_AC to 265V_AC Output range: 5 V / 0.85 A Rated output power: 4.25 W Input power in standby @ 230 V_AC : < 9 mW Active mode efficiency: > 74% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA180V1	12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P	Quick view Key Features Universal AC main input voltage range: 85 to 265 V_AC Output range: 12 V - 0.6 A Rated output power: 7.2 W Input power in standby @ 230 V_AC : less than 18 mW Active mode efficiency: > 80% EMI: according to EN55022-Class-B RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA192V1	7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L	Quick view Key Features Smart standby architecture using the zero power mode (ZPM) for capacitive touch sensing in consumer electronics applications Enhanced system reliability thanks to VIPer0P 800 V avalanche rugged technology and its embedded protection Minimized system input power consumption: less than 30 mW at 230 V_AC in ZPM IEC55022 Class B conducted EMI compliant, even with reduced EMI filter, thanks to the frequency jittering feature IEC61000-4-2 (ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge) compliant RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
X-NUCLEO-NFC04A1	Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo	Quick view Key Features Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo Up to 4-Kbit memory with NDEF support 54 mm diameter, single layer circular antenna Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connector Self-powered or powered through the Arduino™ UNO R3 connectors Three general purpose LEDs Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware FCC and IC verified RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
ST25DV-DISCOVERY	Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability	Quick view Key Features Two ready-to-use printed circuit boards (PCB): ST25DV_Discovery_Mboard: STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM. LCD color screen (320 x 200 pixels) Touch screen driver Different color LEDs (power, user, ST link) User push button Joystick for menu selection リセットボタン On board ST link for microcontroller firmware upgrade and debug ST link mini USB User micro USB USB micro or mini connector for board powering Demonstration use cases stored in memory Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector ST25DV_Discovery_ANT_C5: 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB ST25DV04K Dynamic NFC / RFID tag I² C interface connector Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-GLA001V1	Triac and AC switch insulated control evaluation board	Quick view Key Features Insulated control of three different AC switches used to drive AC loads up to 1 kW (230 Vrms) for residential appliances Interface with STM32 Nucleo-64 development board Three control modes available thanks to STM32 Nucleo-64 firmware (continuous or pulse gate current, timer option and phase control) Easy to configure through user-friendly interface Compatible with any external microcontroller Input voltage range: 90 V_AC to 265 V_AC 50 / 60 Hz Operating temperature: 0 °C to 60 °C 5 V and 3.3 V insulated power supply Low standby power losses (< 300 mW) Criteria A @ 2 kV IEC 61000-4-4 Criteria B @ 4 kV IEC 61000-4-4 RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IPMNM1N	60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET	Quick view Key Features Input voltage: from 125 to 400 V_DC Nominal power: up to 60 W Nominal current: up to 0.35 Arms Input auxiliary voltage: up to 20 V_DC Single- or three-shunt resistors for current sensing (with sensing network) Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU Overcurrent hardware protection IPM temperature monitoring and protection Hall sensor or encoder input Intelligent power module: SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package) Motor control connector (32 pins) interfacing with ST MCU boards Universal design for further evaluation with bread board and testing pins Very compact size RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IPMNM2N	100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET	Quick view Key Features Input voltage: from 125 to 400 V_DC Nominal power: up to 100 W Nominal current: up to 0.6 A_rms Input auxiliary voltage: up to 20 V_DC Single- or three-shunt resistors for current sensing (with sensing network) Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU Overcurrent hardware protection IPM temperature monitoring and protection Hall sensor or encoder input Intelligent power module: SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package) Motor control connector (32 pins) interfacing with ST MCU boards Universal design for further evaluation with bread board and testing pins Very compact size RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-MKI183V1	LPS33HW adapter board for a standard DIL24 socket	Quick view Key Features Complete LPS33HW pinout for a standard DIL 24 socket Fully compatible with and STEVAL-MKI109V3 motherboards RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-SCR001V1	Inrush current solution with bypass SCR	Quick view Key Features Two high-temperature thyristors (SCR) in D²PAK package to bypass the inrush resistor Compact SMD solution: 26 x 26 mm (≈ 1 sq. in) Simple drive circuit: 2 low voltage transistors and 7 resistors (no MCU) Requires an unregulated power supply (12 V typ.; created from a secondary winding) Compatible with PFC and fly-back converter Suitable for applications from 50 W up to 800 W (230 V_RMS , T_AMB = 60 °C) Input voltage range: 90-265 V_AC , 50/60 Hz Robust and immune (2 kV IEC 61000-4-5, 2.5 kV IEC 61000-4-4) and low EMI noise (EN55014) solution RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-MKI185V1	IIS2MDC adapter board for a standard DIL24 socket	Quick view Key Features Complete IIS2MDC pinout for a standard DIL24 socket Fully compatible with the STEVAL-MKI109V3 motherboard RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-MKI186V1	IIS3DHHC adapter board for a standard DIL 24 socket	Quick view Key Features Complete IIS3DHHC pinout for a standard DIL 24 socket Fully compatible with the STEVAL-MKI109V3 motherboard RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
EVALSTDRIVE601	EVALSTRIVE601 - Demonstration board for STDRIVE601 triple gate driver	Quick view Key Features High voltage rail up to 600V Driver supply input voltage range 9V-20V STGD6M65DF2 IGBTs power stage featuring: V_(BR)CES = 650 V V_CE(sat) = 1.55 V @ I_C = 6 A Dual footprint for IGBT/MOSFET package: DPAK PowerFlat 8x8 Selectable single or 3-shunt current sensing topology: Sensored or sensorless BEMF detection FOC or 6-Step algorithm SmartShutdown overcurrent protection Hall effect sensors connector Bus voltage sensing 450V bulk capacitor Connector for interfacing with MCU RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像
STEVAL-VP12201B	15 V/200 mA buck converter based on VIPER122	Quick view Key Features Universal input mains range: 85–265 V_AC Frequency: 50-60 Hz Output voltage: 15 V Output current: 200 mA Very compact size Stand-by mains consumption: < 30mW at 230 V_AC Average efficiency: > 77% Tight line and load regulation over the entire input and output range Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature WEEE compliant RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-IHM021V2	100 W, 3-phase inverter based on L6390 and UltraFASTmesh™ MOSFET for speed FOC of 3-phase PMSM motor drive	Quick view Key Features Wide range input voltage Maximum power: up to 100 W at 230 Vac input STD5N52U power MOSFET (4.4 A, 520 V) Compatible with other power switches in DPAK packages (i.e. the STGD6NC60HD or STGDL6NC60DI) 15 V auxiliary power supply connector Motor control connector for interfacing with STM32-based control stages Three shunt resistor-based motor current sensing network Target applications: refrigerator compressors and dishwasher pumps RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber
STEVAL-ISA140V1	15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE	Quick view Key Features AC Main Input voltage range: 100 V_AC to 265 V_AC Mains frequency (f_L ): 50 Hz / 60 Hz Output voltage typ: 12 V Output current: 1.25 A Output ripple voltage: 50 mV Rated output power: 15 W Input power in standby @230 V_AC : 50 mW Active mode efficiency: 78% Ambient operating temperature: 60 °C RoHS compliant さらに表示製品の詳細データブリーフダウンロード画像注目リソース Schematics BOM Gerber

製品型番

STEVAL-IHM045V1

3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)

クイック･ビュー

Key Features

Wide-range input voltage (30-270 Vac)
Maximum power up to 100 W at 230 Vac input
Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
Efficient DC-DC power supply (15 V, 3.3 V)
DC bus voltage power supply connectors
External 15 V input
Dedicated connector for interfacing with the various other ST evaluation boards
Suitable for sinusoidal FOC drives
Selectable single or three-shunt current reading topology with fast operational amplifier
Configurable for direct motor current sampling from shunt resistors
Hardware overcurrent detecting network
Temperature sensor
Hall sensor/quadrature encoder inputs
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IHM032V1

150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control

クイック･ビュー

Key Features

Compact size
Wide-range input voltage
Maximum power up to 150 W at 230 Vac input
STGD3HF60HD: 4.5 A, 600 V very fast IGBT
Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
AC or DC bus voltage power supply connectors
Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
Efficient DC/DC power supply (15 V, 3.3 V)
Suitable both for sinusoidal FOC and trapezoidal BLDC drive
Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
Hardware overcurrent protection with boost capabilities
Temperature sensor
BEMF-detection network for BLDC drive
Current regulation/limitation network for BLDC drive
Hall sensor/quadrature encoder inputs

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA153V1

12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE

クイック･ビュー

Key Features

Universal input mains range: 90 – 265 V_AC frequency: 50 - 60 Hz
Output voltage/current: 12 V/1.25 A (1.65 A peak)
Very compact size
Standby mains consumption: lower than 30 mW at 230 V_AC
Minimum active mode efficiency: 81.55%
Minimum active mode at 10% load efficiency: 71.55%
EMI: in accordance with EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA171V1

12 V - 15 W quasi resonant flyback converter based on the VIPER35HD

クイック･ビュー

Key Features

Wide input voltage range: 90 V_AC to 264 V_AC
Output voltage: 12 V
Output current: 1.25 A
Rated output power: 15 W
Quasi resonant operation
Input power standby @ 230 V_AC : < 30 mW
Active mode efficiency: > 82%
EMI: pre-compliance with EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA174V1

7 W dual output offline flyback converter for home appliances using VIPer0P

クイック･ビュー

Key Features

Zero-power input consumption ratified as per IEC62301 Clause 4.5 (P_{IN_ZPM} < 5 mW at 230 V_AC )
Negative output voltage easily set through the voltage divider
Five-star energy efficiency when operating with no load (P_{IN_no_load} < 10 mW at 230 V_AC )
Meets ErP Lot 6 Tier 2 requirements for household and office equipment
Meets European regulation 1275/2008 regarding eco-design requirements for standby and off-mode electric power consumption for household and office equipment
Compliant with the ErP Lot 6 Tier 2 requirements in off-mode
Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
VIPer0P 800 V avalanche rugged technology and its embedded protections ensure enhanced system reliability
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA184V1

5V/1.2A 12V/750mA double output flyback converter using VIPER37LD

クイック･ビュー

Key Features

Universal input mains range: 85 – 265 V_AC ; frequency: 50 – 60 Hz
Output voltage 1: 5 V / 1.2 A
Output voltage 2: 12 V / 0.75 A
Very compact size
Standby mains consumption: < 40 mW at 230 V_AC
Average efficiency: > 75%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-MKI168V1

IIS2DH adapter board for a standard DIL 24 socket

クイック･ビュー

STEVAL-ISA178V1

5 V / 200 mA high voltage buck-converter based on VIPer01

クイック･ビュー

Key Features

Five-star energy efficiency for operation under no load (P_{IN_no_load} < 20 mW @ 230 V_AC )
Meets ErP Lot 6 Tier 2 requirements for household and office equipment
Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
VIPer01 800V avalanche rugged technology and embedded protections ensure enhanced system reliability
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA182V1

8.4 W / 30 W peak power offline flyback converter using VIPER38HD

クイック･ビュー

Key Features

US input range: 85 – 132 V_AC , frequency: 50 – 60 Hz
Output voltage / current: 12 V / 0.7 A (2.5 A peak)
Very compact size
Standby mains consumption: lower than 25 mW at 115 V_AC
Min. active mode efficiency: 81.14%
Min. active mode at 10% load efficiency: 71.14%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IHM036V1

Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

クイック･ビュー

Key Features

Complete 100 W power inverter solution
HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
Input inrush limiter based on NTC resistor
Single shunt resistor current-sensing method
Overtemperature and overcurrent hardware protection
Compact and safe design
Test points available to allow further evaluation
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IHM040V1

BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™

クイック･ビュー

Key Features

Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
Output current: 0.5 A_RMS to the motor
Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM

STEVAL-ISA115V1

12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS

クイック･ビュー

Key Features

Universal input mains range:
- input voltage: 90 VAC - 264 VAC
- frequency: 45 Hz - 65 Hz
Single-output voltage: 12 V @ 0.15 A continuous operation
Standby mains consumption: < 50 mW @ 265 VAC
Average efficiency: > 75%
Fully protected against faults (overload, feedback disconnection and overheating)
EMI: in accordance with EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IHM035V2

3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)

クイック･ビュー

Key Features

Nominal power: up to 100 W
Compatible with 3.3 V and 5 V control board
Single shunt resistor for current reading
On-board temperature sensor
Overcurrent protection with boost/disabling capability
For six-step drives:
- Current limitation/regulation network
- BEMF detection network
MC connector
Compatible with sinusoidal and trapezoidal control
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA195V1

5 V / 0.36 A buck converter using VIPerPlus ? VIPer11

クイック･ビュー

Key Features

Universal AC main input voltage range: 85 V_AC to 265 V_AC
Output range: 5 V / 0.36 A
Rated output power: 1.8 W
Input power in standby at 230 V_AC : less than 18 mW
Active mode efficiency: > 65%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA196V1

5 V / 1.2 A non-isolated flyback converter using VIPerPlus?VIPer114LS

クイック･ビュー

Key Features

Universal AC main input voltage range: 85V_AC to 265V_AC
Output voltage: 5 V
Output current: 1.2 A
Rated output power: 6 W
No load input power @230 V_AC : < 10 mW
Active mode efficiency: > 78%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA197V1

12 V, 7.8 W isolated flyback converter based on VIPer114LS

クイック･ビュー

Key Features

Universal input mains range: 90 – 265V_AC , frequency: 50 – 60 Hz
Output voltage: 12 V
Output current: 0.65 A
Very compact size
Stand-by mains consumption: < 20 mW at 230V_AC
Average efficiency: > 81%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IPMNG3Q

300 W motor control power board based on STGIPQ3H60T-H SLLIMM™-nano IPM

クイック･ビュー

Key Features

Input voltage: from 125 to 400 V_DC
Nominal power: up to 300 W
Nominal current: up to 1.8 A
Input auxiliary voltage: up to 20 V_DC
Single- or three-shunt resistors for current sensing (with sensing network)
Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
IGBT intelligent power module:
- 2^nd series SLLIMM-nano IPM (STGIPQ3H60T-H – full molded package)
Motor control connector (32 pins) interfacing with ST MCU boards
Universal design for further evaluation with bread board and testing pins
Very compact size
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA177V1

5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01

クイック･ビュー

Key Features

Universal AC main input voltage range: 85V_AC to 265V_AC
Output range: 5 V / 0.85 A
Rated output power: 4.25 W
Input power in standby @ 230 V_AC : < 9 mW
Active mode efficiency: > 74%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA180V1

12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P

クイック･ビュー

Key Features

Universal AC main input voltage range: 85 to 265 V_AC
Output range: 12 V - 0.6 A
Rated output power: 7.2 W
Input power in standby @ 230 V_AC : less than 18 mW
Active mode efficiency: > 80%
EMI: according to EN55022-Class-B
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA192V1

7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L

クイック･ビュー

Key Features

Smart standby architecture using the zero power mode (ZPM) for capacitive touch sensing in consumer electronics applications
Enhanced system reliability thanks to VIPer0P 800 V avalanche rugged technology and its embedded protection
Minimized system input power consumption: less than 30 mW at 230 V_AC in ZPM
IEC55022 Class B conducted EMI compliant, even with reduced EMI filter, thanks to the frequency jittering feature
IEC61000-4-2 (ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge) compliant
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

クイック･ビュー

Key Features

Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
Up to 4-Kbit memory with NDEF support
54 mm diameter, single layer circular antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino™ UNO R3 connector
Self-powered or powered through the Arduino™ UNO R3 connectors
Three general purpose LEDs
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
FCC and IC verified
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

クイック･ビュー

Key Features

Two ready-to-use printed circuit boards (PCB):
- ST25DV_Discovery_Mboard:
- STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
- LCD color screen (320 x 200 pixels)
- Touch screen driver
- Different color LEDs (power, user, ST link)
- User push button
- Joystick for menu selection
- リセットボタン
- On board ST link for microcontroller firmware upgrade and debug
- ST link mini USB
- User micro USB
- USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
ST25DV_Discovery_ANT_C5:
- 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
- ST25DV04K Dynamic NFC / RFID tag
- I² C interface connector
- Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-GLA001V1

Triac and AC switch insulated control evaluation board

クイック･ビュー

Key Features

Insulated control of three different AC switches used to drive AC loads up to 1 kW (230 Vrms) for residential appliances
Interface with STM32 Nucleo-64 development board
Three control modes available thanks to STM32 Nucleo-64 firmware (continuous or pulse gate current, timer option and phase control)
Easy to configure through user-friendly interface
Compatible with any external microcontroller
Input voltage range: 90 V_AC to 265 V_AC 50 / 60 Hz
Operating temperature: 0 °C to 60 °C
5 V and 3.3 V insulated power supply
Low standby power losses (< 300 mW)
Criteria A @ 2 kV IEC 61000-4-4
Criteria B @ 4 kV IEC 61000-4-4
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IPMNM1N

60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET

クイック･ビュー

Key Features

Input voltage: from 125 to 400 V_DC
Nominal power: up to 60 W
Nominal current: up to 0.35 Arms
Input auxiliary voltage: up to 20 V_DC
Single- or three-shunt resistors for current sensing (with sensing network)
Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
Intelligent power module:
- SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
Motor control connector (32 pins) interfacing with ST MCU boards
Universal design for further evaluation with bread board and testing pins
Very compact size
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IPMNM2N

100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET

クイック･ビュー

Key Features

Input voltage: from 125 to 400 V_DC
Nominal power: up to 100 W
Nominal current: up to 0.6 A_rms
Input auxiliary voltage: up to 20 V_DC
Single- or three-shunt resistors for current sensing (with sensing network)
Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
Intelligent power module:
- SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
Motor control connector (32 pins) interfacing with ST MCU boards
Universal design for further evaluation with bread board and testing pins
Very compact size
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-MKI183V1

LPS33HW adapter board for a standard DIL24 socket

クイック･ビュー

STEVAL-SCR001V1

Inrush current solution with bypass SCR

クイック･ビュー

Key Features

Two high-temperature thyristors (SCR) in D²PAK package to bypass the inrush resistor
Compact SMD solution: 26 x 26 mm (≈ 1 sq. in)
Simple drive circuit: 2 low voltage transistors and 7 resistors (no MCU)
Requires an unregulated power supply (12 V typ.; created from a secondary winding)
Compatible with PFC and fly-back converter
Suitable for applications from 50 W up to 800 W (230 V_RMS , T_AMB = 60 °C)
Input voltage range: 90-265 V_AC , 50/60 Hz
Robust and immune (2 kV IEC 61000-4-5, 2.5 kV IEC 61000-4-4) and low EMI noise (EN55014) solution
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-MKI185V1

IIS2MDC adapter board for a standard DIL24 socket

クイック･ビュー

STEVAL-MKI186V1

IIS3DHHC adapter board for a standard DIL 24 socket

クイック･ビュー

EVALSTDRIVE601

EVALSTRIVE601 - Demonstration board for STDRIVE601 triple gate driver

クイック･ビュー

Key Features

High voltage rail up to 600V
Driver supply input voltage range 9V-20V
STGD6M65DF2 IGBTs power stage featuring:
- V_(BR)CES = 650 V
- V_CE(sat) = 1.55 V @ I_C = 6 A
Dual footprint for IGBT/MOSFET package:
- DPAK
- PowerFlat 8x8
Selectable single or 3-shunt current sensing topology:
- Sensored or sensorless BEMF detection
- FOC or 6-Step algorithm
SmartShutdown overcurrent protection
Hall effect sensors connector
Bus voltage sensing
450V bulk capacitor
Connector for interfacing with MCU
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

STEVAL-VP12201B

15 V/200 mA buck converter based on VIPER122

クイック･ビュー

Key Features

Universal input mains range: 85–265 V_AC
Frequency: 50-60 Hz
Output voltage: 15 V
Output current: 200 mA
Very compact size
Stand-by mains consumption: < 30mW at 230 V_AC
Average efficiency: > 77%
Tight line and load regulation over the entire input and output range
Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
WEEE compliant
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-IHM021V2

100 W, 3-phase inverter based on L6390 and UltraFASTmesh™ MOSFET for speed FOC of 3-phase PMSM motor drive

クイック･ビュー

Key Features

Wide range input voltage
Maximum power: up to 100 W at 230 Vac input
STD5N52U power MOSFET (4.4 A, 520 V)
Compatible with other power switches in DPAK packages (i.e. the STGD6NC60HD or STGDL6NC60DI)
15 V auxiliary power supply connector
Motor control connector for interfacing with STM32-based control stages
Three shunt resistor-based motor current sensing network
Target applications: refrigerator compressors and dishwasher pumps
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

STEVAL-ISA140V1

15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE

クイック･ビュー

Key Features

AC Main Input voltage range: 100 V_AC to 265 V_AC
Mains frequency (f_L ): 50 Hz / 60 Hz
Output voltage typ: 12 V
Output current: 1.25 A
Output ripple voltage: 50 mV
Rated output power: 15 W
Input power in standby @230 V_AC : 50 mW
Active mode efficiency: 78%
Ambient operating temperature: 60 °C
RoHS compliant

さらに表示

製品の詳細データブリーフダウンロード

画像

注目リソース

Schematics BOM Gerber

00 ファイルがダウンロード用に選択されています

技術文書

アプリケーションノート

概要	バージョン	サイズ	アクション
AN4479 12 V, 15 W peak 20 W isolated flyback converter based on VIPer38LE	1.0	1.08 MB	PDF
AN4260 12 V, 150 mA non-isolated buck converter using the VIPER06XS, from the VIPer™ plus family	4.2	3.5 MB	PDF
AN5057 12 V, 7.8 W isolated flyback converter based on VIPer114LS	1.0	2.34 MB	PDF
AN4924 12 V, 8.4 W peak power 30 W isolated flyback converter using VIPer38HD	1.0	2.94 MB	PDF
AN4812 15 W, 12 V output, isolated flyback converter using Viper35HD device from the VIPer™ Plus family of high voltage converters	2.0	2.43 MB	PDF
AN4830 15 W, 5 V - 12 V double output, isolated flyback converter based on Viper37LE/D	1.0	3.13 MB	PDF
AN4941 7 W dual output (-5 V/+7 V) non-isolated flyback converter with capacitive touch sensing using VIPer0P and STM32L052	1.0	3.43 MB	PDF
AN4653 Cycling endurance and data retention of high density EEPROM based on CMOS F8H process	1.0	267.34 KB	PDF
AN4966 Design guidelines for the shutdown function in the SLLIMM-nano series	1.0	1.54 MB	PDF
AN4503 Environmental sensors: Hardware abstraction layer for Android	3.0	241.61 KB	PDF
AN4722 HTS221 digital humidity sensor: hardware guidelines for system integration	1.0	844.49 KB	PDF
AN2972 How to design an antenna for dynamic NFC tags	9.0	1.59 MB	PDF
AN4544 IGBT datasheet tutorial	1.1	2.4 MB	PDF
AN2648 Increasing the resolution of analog temperature sensors	1.4	161.7 KB	PDF
AN5063 LPS33HW digital pressure sensor: guidelines for system integration	1.0	681.3 KB	PDF
AN4911 NDEF management with ST25DVxxx and ST25TVxxx products	4.0	460.67 KB	PDF
AN4840 SLLIMM™-nano 2nd series small low-loss intelligent molded module	1.0	3.63 MB	PDF
AN4043 SLLIMM™-nano small low-loss intelligent molded module	2.0	8.28 MB	PDF
AN4836 STEVAL-ISA174V1: VIPer0P 7 W double output non-isolated flyback	2.0	4.05 MB	PDF
AN4855 STEVAL-ISA177V1 5 V/4.25 W non-isolated flyback demo with VIPer01	2.0	8.82 MB	PDF
AN4858 STEVAL-ISA178V1 5 V/1 W 30 kHz buck demo with VIPer01	1.0	1.84 MB	PDF
AN4905 STEVAL-ISA180V1 12 V/0.6 A isolated flyback demo with VIPer0P	1.0	2.55 MB	PDF
AN5081 STEVAL-ISA195V1: 5 V/1.8 W 30 kHz buck demo with the VIPer11	2.0	4.1 MB	PDF
AN5072 STEVAL-ISA196V1: VIPer11 5V/1.2A non-isolated flyback	1.0	4.21 MB	PDF
AN4419 VIPER37HE: 15 W wide range single output evaluation board	1.0	1.42 MB	PDF
AN1471 What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?	4.4	72.36 KB	PDF

AN4479

12 V, 15 W peak 20 W isolated flyback converter based on VIPer38LE

PDF

AN4260

12 V, 150 mA non-isolated buck converter using the VIPER06XS, from the VIPer™ plus family

PDF

AN5057

12 V, 7.8 W isolated flyback converter based on VIPer114LS

PDF

AN4924

12 V, 8.4 W peak power 30 W isolated flyback converter using VIPer38HD

PDF

AN4812

15 W, 12 V output, isolated flyback converter using Viper35HD device from the VIPer™ Plus family of high voltage converters

PDF

AN4830

15 W, 5 V - 12 V double output, isolated flyback converter based on Viper37LE/D

PDF

AN4941

7 W dual output (-5 V/+7 V) non-isolated flyback converter with capacitive touch sensing using VIPer0P and STM32L052

PDF

AN4653

Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

PDF

AN4966

Design guidelines for the shutdown function in the SLLIMM-nano series

PDF

AN4503

Environmental sensors: Hardware abstraction layer for Android

PDF

AN4722

HTS221 digital humidity sensor: hardware guidelines for system integration

PDF

AN2972

How to design an antenna for dynamic NFC tags

PDF

AN4544

IGBT datasheet tutorial

PDF

AN2648

Increasing the resolution of analog temperature sensors

PDF

AN5063

LPS33HW digital pressure sensor: guidelines for system integration

PDF

AN4911

NDEF management with ST25DVxxx and ST25TVxxx products

PDF

AN4840

SLLIMM™-nano 2nd series small low-loss intelligent molded module

PDF

AN4043

SLLIMM™-nano small low-loss intelligent molded module

PDF

AN4836

STEVAL-ISA174V1: VIPer0P 7 W double output non-isolated flyback

PDF

AN4855

STEVAL-ISA177V1 5 V/4.25 W non-isolated flyback demo with VIPer01

PDF

AN4858

STEVAL-ISA178V1 5 V/1 W 30 kHz buck demo with VIPer01

PDF

AN4905

STEVAL-ISA180V1 12 V/0.6 A isolated flyback demo with VIPer0P

PDF

AN5081

STEVAL-ISA195V1: 5 V/1.8 W 30 kHz buck demo with the VIPer11

PDF

AN5072

STEVAL-ISA196V1: VIPer11 5V/1.2A non-isolated flyback

PDF

AN4419

VIPER37HE: 15 W wide range single output evaluation board

PDF

AN1471

What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

PDF

テクニカル･ノート & 技術解説

概要	バージョン	サイズ	アクション
TN1219 HTS221 digital humidity sensor: reference design implementation	2.0	367.08 KB	PDF
TN1251 How to interpret pressure and temperature readings in the LPS33HW pressure sensor	1.0	197.58 KB	PDF
TN1218 Interpreting humidity and temperature readings in the HTS221 digital humidity sensor	4.0	3.67 MB	PDF
TN1221 Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)	1.0	542.38 KB	PDF
TN1037 SLLIMM™-nano mounting instructions and heatsink	3.0	1.21 MB	PDF

TN1219

HTS221 digital humidity sensor: reference design implementation

PDF

TN1251

How to interpret pressure and temperature readings in the LPS33HW pressure sensor

PDF

TN1218

Interpreting humidity and temperature readings in the HTS221 digital humidity sensor

PDF

TN1221

Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)

PDF

TN1037

SLLIMM™-nano mounting instructions and heatsink

PDF

ユーザマニュアル

	概要	バージョン	サイズ	アクション
	UM1483 Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B	1.1	591.59 KB	PDF
	UM2325 ST PowerStudio パワー･デバイス用動的電気・熱シミュレーション･ソフトウェア	1.0	3.61 MB	PDF

UM1483

Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

PDF

UM2325

ST PowerStudio パワー･デバイス用動的電気・熱シミュレーション･ソフトウェア

PDF

設計ノート & ヒント

	概要	バージョン	サイズ	アクション
	DT0096 LPS33HW digital pressure sensor: hardware guidelines for system integration	1.0	233.85 KB	PDF

DT0096

LPS33HW digital pressure sensor: hardware guidelines for system integration

PDF

プレゼンテーション & トレーニング資料

プレゼンテーション

概要	バージョン	サイズ	アクション
ST MEMS Longevity Program	1.0	471.09 KB	PDF
ST PowerStudio overview	1.0	1.81 MB	PDF
ST25DV-I2C product presentation	2.2	2.1 MB	PDF

ST MEMS Longevity Program

PDF

ST PowerStudio overview

PDF

ST25DV-I2C product presentation

PDF

概要	バージョン	サイズ	アクション
Industrial MEMS motion sensors	1.0	659.27 KB	PDF
ST25DV-I2C series - Dynamic NFC/RFID tags	1.0	831.22 KB	PDF
Serial EEPROM	1.0	1.73 MB	PDF

	概要	バージョン	サイズ	アクション
	EEPROM selection guide	2.0	475.96 KB	PDF

概要	バージョン	サイズ	アクション
モータ制御リファレンスガイド	15.11	2.67 MB	PDF
NFC solutions from ST	1.0	3.41 MB	PDF
VIPerPlus - Your SMPS design deserves a Plus	05.2018	1,002 KB	PDF
VIPerPlus evaluation boards	05.2018	1,002.52 KB	PDF

開発ツール･ハードウェア

ソフトウェア開発ツール

写真	Part number	製造元	概要
	ST MOSFET Finder	ST	MOSFET product finder application for Android and iOS
	ST-IGBT-FINDER	ST	IGBT product finder application for Android and iOS

製品型番

ST MOSFET Finder

MOSFET product finder application for Android and iOS

ST-IGBT-FINDER

IGBT product finder application for Android and iOS

ソフトウェア製品

評価ツール･ソフトウェア

写真	Part number	製造元	概要
	STSW-POWERSTUDIO	ST	ST PowerStudio dynamic electrothermal simulation software for power devices

製品型番

STSW-POWERSTUDIO

ST PowerStudio dynamic electrothermal simulation software for power devices

MCU & MPU組込みソフトウェア

Part number	製造元	概要
X-CUBE-MEMS-XT1	ST	Sensor and DSP algorithm software expansion for STM32Cube
X-CUBE-MEMS1	ST	Sensor and motion algorithm software expansion for STM32Cube
X-CUBE-NFC4	ST	Dynamic NFC/RFID tag IC software expansion for STM32Cube

製品型番

X-CUBE-MEMS-XT1

Sensor and DSP algorithm software expansion for STM32Cube

X-CUBE-MEMS1

Sensor and motion algorithm software expansion for STM32Cube

X-CUBE-NFC4

Dynamic NFC/RFID tag IC software expansion for STM32Cube

MEMS and Sensors Software

Part number	製造元	概要
C-Driver-MEMS	ST	Standard C platform-independent drivers for MEMS motion and environmental sensors
LinuxDriverIIO	ST	Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)
LinuxDriverInput	ST	Linux device drivers for MEMS motion and environmental sensors (Input framework)

製品型番

C-Driver-MEMS

Standard C platform-independent drivers for MEMS motion and environmental sensors

LinuxDriverIIO

Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

LinuxDriverInput

Linux device drivers for MEMS motion and environmental sensors (Input framework)

ST25 - NFC / RFID Software

Part number	製造元	概要
STSW-ST25001	ST	Application executable of the "NFC Tap" Android app for ST25 product family
STSW-ST25DV001	ST	Firmware for ST25DV-DISCOVERY kit
STSW-ST25IOS001	ST	Application executable of the "NFC Tap" iOS app for ST25 product family
STSW-ST25SDK001	ST	Software Development Kit for ST25 Tags and Dynamic Tags

製品型番

STSW-ST25001

Application executable of the "NFC Tap" Android app for ST25 product family

STSW-ST25DV001

Firmware for ST25DV-DISCOVERY kit

STSW-ST25IOS001

Application executable of the "NFC Tap" iOS app for ST25 product family

STSW-ST25SDK001

Software Development Kit for ST25 Tags and Dynamic Tags

eDesignSuite

コンバータ

コンバータ

DC/DC AC/DC

Input

Volt. Min V This option is required. And must be less than or equal to Volt. Max [V]

Volt. Max V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

Voltage V This option is required and must be a number.

Current A This option is required and must be a number.

Diodes and Rectifiers

Part number	概要
STPS2150	150 V, 2 A Power Schottky Rectifier
STTH1R06	600 V, 1 A Turbo 2 Ultrafast Diode

Part number

STPS2150

150 V, 2 A Power Schottky Rectifier

STTH1R06

600 V, 1 A Turbo 2 Ultrafast Diode

Imaging and Photonics Solutions

Part number	概要
VL53L0X	World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X	Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
VL6180X	Proximity sensor, gesture and ambient light sensing (ALS) module

Part number

VL53L0X

World smallest Time-of-Flight (ToF) ranging sensor

VL53L1X

Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

VL6180X

Proximity sensor, gesture and ambient light sensing (ALS) module

MEMS and Sensors

Part number	概要
HTS221	Capacitive digital sensor for relative humidity and temperature
IIS2MDC	High accuracy, ultra-low-power ,3-axis digital output magnetometer
IIS3DHHC	High-resolution, high-stability 3-axis digital inclinometer for industrial applications
LPS33HW	Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package
STLM20	Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751	2.25 V low-voltage local digital temperature sensor

Part number

HTS221

Capacitive digital sensor for relative humidity and temperature

IIS2MDC

High accuracy, ultra-low-power ,3-axis digital output magnetometer

IIS3DHHC

High-resolution, high-stability 3-axis digital inclinometer for industrial applications

LPS33HW

Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package

STLM20

Analog temperature sensor, ultra-low current 2.4 V, high precision

STTS751

2.25 V low-voltage local digital temperature sensor

NFC

Part number	概要
ST25DV64K	64-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Part number

ST25DV64K

64-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Power Transistors

Part number	概要
STD5N60DM2	N-channel 600 V, 1.38 Ohm typ., 3.5 A MDmesh DM2 Power MOSFET in a DPAK package
STD6N60DM2	N-channel 600 V, 0.95 Ohm typ., 5 A MDmesh DM2 Power MOSFET in a DPAK package
STD7N60DM2	N-channel 600 V, 0.78 Ohm typ., 6 A MDmesh DM2 Power MOSFET in a DPAK package
STD8N60DM2	N-channel 600 V, 550 mOhm typ., 8 A MDmesh DM2 Power MOSFET in a DPAK package