概要
ソリューション
HW評価ツール
リソース
ツール & ソフトウェア
主要製品
Get Started

洗濯機(乾燥機内蔵型も含む)は、最も長い開発の歴史を持つ生活家電であると考えられており、市販モデルの登場は1850年代半ばにまでさかのぼります。現在の洗濯機は、より効果的に洗浄する一方、電力、水、洗剤の消費量を抑え、可能な限り静音に動作しながら、より高い安全性を確保する必要があります。また、ホーム・オートメーションやクラウド/モバイル・アプリによる制御を可能にするため、通信機能の搭載がますます求められ、複雑な機能を簡単に利用できるようにするインタフェースも必要とされています。

STは、STM32マイクロコントローラ、パワーMOSFET、IGBT、インテリジェント・パワー・モジュール(IPM)、トライアック、ダイオードや高電圧ゲート・ドライバなど、今日の洗濯機で使用される各種モータ(3相ブラシレス・モータからユニバーサル・モータまで)向けの効率的なモータ制御ソリューションを設計するための幅広いデバイスを提供するとともに、さまざまなハードウェアとソフトウェアの評価・開発ツールを提供して設計をサポートしています。

さらに、STは、幅広い先進的なMEMSモーション・センサおよび環境センサや有線/無線通信ソリューションを提供しており、ネットワークに接続した効率的で使いやすい洗濯機の設計をサポートしています。

製品型番
概要
STEVAL-ISA184V1 5V/1.2A 12V/750mA double output flyback converter using VIPER37LD Quick view

主な特徴

  • Universal input mains range: 85 – 265 VAC ; frequency: 50 – 60 Hz
  • Output voltage 1: 5 V / 1.2 A
  • Output voltage 2: 12 V / 0.75 A
  • Very compact size
  • Standby mains consumption: < 40 mW at 230 VAC
  • Average efficiency: > 75%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM05F 500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM10F 1000 W motor control power board based on STGIF10CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1000 W
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM10B 1200 W motor control power board based on STGIB10CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1200 W
  • Nominal current: up to 7 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM07F 700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI168V1 IIS2DH adapter board for a standard DIL 24 socket Quick view

主な特徴

  • Complete IIS2DH pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA178V1 5 V / 200 mA high voltage buck-converter based on VIPer01 Quick view

主な特徴

  • Five-star energy efficiency for operation under no load (PIN_no_load < 20 mW @ 230 VAC )
  • Meets ErP Lot 6 Tier 2 requirements for household and office equipment
  • Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
  • Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
  • VIPer01 800V avalanche rugged technology and embedded protections ensure enhanced system reliability
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA182V1 8.4 W / 30 W peak power offline flyback converter using VIPER38HD Quick view

主な特徴

  • US input range: 85 – 132 VAC , frequency: 50 – 60 Hz
  • Output voltage / current: 12 V / 0.7 A (2.5 A peak)
  • Very compact size
  • Standby mains consumption: lower than 25 mW at 115 VAC
  • Min. active mode efficiency: 81.14%
  • Min. active mode at 10% load efficiency: 71.14%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA195V1 5 V / 0.36 A buck converter using VIPerPlus ? VIPer11 Quick view

主な特徴

  • Universal AC main input voltage range: 85 VAC to 265 VAC
  • Output range: 5 V / 0.36 A
  • Rated output power: 1.8 W
  • Input power in standby at 230 VAC : less than 18 mW
  • Active mode efficiency: > 65%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA196V1 5 V / 1.2 A non-isolated flyback converter using VIPerPlus?VIPer114LS Quick view

主な特徴

  • Universal AC main input voltage range: 85VAC to 265VAC
  • Output voltage: 5 V
  • Output current: 1.2 A
  • Rated output power: 6 W
  • No load input power @230 VAC : < 10 mW
  • Active mode efficiency: > 78%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA197V1 12 V, 7.8 W isolated flyback converter based on VIPer114LS Quick view

主な特徴

  • Universal input mains range: 90 – 265VAC , frequency: 50 – 60 Hz
  • Output voltage: 12 V
  • Output current: 0.65 A
  • Very compact size
  • Stand-by mains consumption: < 20 mW at 230VAC
  • Average efficiency: > 81%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG3Q 300 W motor control power board based on STGIPQ3H60T-H SLLIMM™-nano IPM Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 300 W
  • Nominal current: up to 1.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ3H60T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA177V1 5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01 Quick view

主な特徴

  • Universal AC main input voltage range: 85VAC to 265VAC
  • Output range: 5 V / 0.85 A
  • Rated output power: 4.25 W
  • Input power in standby @ 230 VAC : < 9 mW
  • Active mode efficiency: > 74%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA180V1 12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P Quick view

主な特徴

  • Universal AC main input voltage range: 85 to 265 VAC
  • Output range: 12 V - 0.6 A
  • Rated output power: 7.2 W
  • Input power in standby @ 230 VAC : less than 18 mW
  • Active mode efficiency: > 80%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA192V1 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L Quick view

主な特徴

  • Smart standby architecture using the zero power mode (ZPM) for capacitive touch sensing in consumer electronics applications
  • Enhanced system reliability thanks to VIPer0P 800 V avalanche rugged technology and its embedded protection
  • Minimized system input power consumption: less than 30 mW at 230 VAC in ZPM
  • IEC55022 Class B conducted EMI compliant, even with reduced EMI filter, thanks to the frequency jittering feature
  • IEC61000-4-2 (ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge) compliant
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM08B 800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM Quick view

主な特徴

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

主な特徴

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

主な特徴

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • リセットボタン
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVALSTDRV600HB8 Demonstration board kit for L638xE and L639x high-voltage gate drivers Quick view

主な特徴

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

さらに表示

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-GLA001V1 Triac and AC switch insulated control evaluation board Quick view

主な特徴

  • Insulated control of three different AC switches used to drive AC loads up to 1 kW (230 Vrms) for residential appliances
  • Interface with STM32 Nucleo-64 development board
  • Three control modes available thanks to STM32 Nucleo-64 firmware (continuous or pulse gate current, timer option and phase control)
  • Easy to configure through user-friendly interface
  • Compatible with any external microcontroller
  • Input voltage range: 90 VAC to 265 VAC 50 / 60 Hz
  • Operating temperature: 0 °C to 60 °C
  • 5 V and 3.3 V insulated power supply
  • Low standby power losses (< 300 mW)
  • Criteria A @ 2 kV IEC 61000-4-4
  • Criteria B @ 4 kV IEC 61000-4-4
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG8Q 600 W motor control power board based on STGIPQ8C60T-HZ SLLIMM™-nano IPM Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 600 W
  • Nominal current: up to 4.8 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ8C60T-HZ – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM1N 60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM2N 100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG5Q 450 W motor control power board based on STGIPQ5C60T-HZ SLLIMM™-nano IPM Quick view

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 450 W
  • Nominal current: up to 3 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ5C60T-HZ – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI183V1 LPS33HW adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete LPS33HW pinout for a standard DIL 24 socket
  • Fully compatible with and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SCR001V1 Inrush current solution with bypass SCR Quick view

主な特徴

  • Two high-temperature thyristors (SCR) in D²PAK package to bypass the inrush resistor
  • Compact SMD solution: 26 x 26 mm (≈ 1 sq. in)
  • Simple drive circuit: 2 low voltage transistors and 7 resistors (no MCU)
  • Requires an unregulated power supply (12 V typ.; created from a secondary winding)
  • Compatible with PFC and fly-back converter
  • Suitable for applications from 50 W up to 800 W (230 VRMS , TAMB  = 60 °C)
  • Input voltage range: 90-265 VAC , 50/60 Hz
  • Robust and immune (2 kV IEC 61000-4-5, 2.5 kV IEC 61000-4-4) and low EMI noise (EN55014) solution
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI185V1 IIS2MDC adapter board for a standard DIL24 socket Quick view

主な特徴

  • Complete IIS2MDC pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109V3 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6498L Evaluation board for the L6498L gate driver Quick view

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6494L Demonstration board for L6494L gate driver Quick view

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVALSTDRIVE601 EVALSTRIVE601 Quick view

主な特徴

  • High voltage rail up to 600V
  • Driver supply input voltage range 9V-20V
  • STGD6M65DF2 IGBTs power stage featuring:
    • V(BR)CES = 650 V
    • VCE(sat) = 1.55 V @ IC = 6 A
  • Dual footprint for IGBT/MOSFET package:
    • DPAK
    • PowerFlat 8x8
  • Selectable single or 3-shunt current sensing topology:
    • Sensored or sensorless BEMF detection
    • FOC or 6-Step algorithm
  • SmartShutdown overcurrent protection
  • Hall effect sensors connector
  • Bus voltage sensing
  • 450V bulk capacitor
  • Connector for interfacing with MCU
  • RoHS compliant

さらに表示

STEVAL-IHM032V1 150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control Quick view

主な特徴

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM036V1 Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B Quick view

主な特徴

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6393FB Low voltage full bridge reference design board featuring L6393 advanced high-voltage gate driver Quick view

主な特徴

  • ~150 W drive capability (50 V - 3.0 Ar.m.s. )
  • Very low area occupation, all devices and power switches in SMD package (no heatsink)
  • Fast-decay or slow-decay on-board constant off-time peak current control
  • PWM voltage mode control with overcurrent protection possible via external logic signals
  • Driver supply voltage on-board generation directly from BUS voltage
  • Carefully optimized layout

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM041V1 Universal motor driver with speed control based on the STM8 and Triac (US version) Quick view

主な特徴

  • Input voltage 120 V/60 Hz
  • Motor current: 7 A RMS
  • Phase control for universal motor drive
  • Open loop or closed loop speed regulation
  • Voltage and current sensing, for sensorless operation (optional)
  • Debug outputs
  • AC tach, Hall sensor or opto-sensor for speed feedback
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM040V1 BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™ Quick view

主な特徴

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM
STEVAL-ISA115V1 12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS Quick view

主な特徴

  • Universal input mains range:
    • input voltage: 90 VAC - 264 VAC
    • frequency: 45 Hz - 65 Hz
  • Single-output voltage: 12 V @ 0.15 A continuous operation
  • Standby mains consumption: < 50 mW @ 265 VAC
  • Average efficiency: > 75%
  • Fully protected against faults (overload, feedback disconnection and overheating)
  • EMI: in accordance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM035V2 3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano) Quick view

主な特徴

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM045V1 3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano) Quick view

主な特徴

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA140V1 15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE Quick view

主な特徴

  • AC Main Input voltage range: 100 VAC to 265 VAC
  • Mains frequency (fL ): 50 Hz / 60 Hz
  • Output voltage typ: 12 V
  • Output current: 1.25 A
  • Output ripple voltage: 50 mV
  • Rated output power: 15 W
  • Input power in standby @230 VAC : 50 mW
  • Active mode efficiency: 78%
  • Ambient operating temperature: 60 °C
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA153V1 12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE Quick view

主な特徴

  • Universal input mains range: 90 – 265 VAC frequency: 50 - 60 Hz
  • Output voltage/current: 12 V/1.25 A (1.65 A peak)
  • Very compact size
  • Standby mains consumption: lower than 30 mW at 230 VAC
  • Minimum active mode efficiency: 81.55%
  • Minimum active mode at 10% load efficiency: 71.55%
  • EMI: in accordance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM023V3 1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT Quick view

主な特徴

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA171V1 12 V - 15 W quasi resonant flyback converter based on the VIPER35HD Quick view

主な特徴

  • Wide input voltage range: 90 VAC to 264 VAC
  • Output voltage: 12 V
  • Output current: 1.25 A
  • Rated output power: 15 W
  • Quasi resonant operation
  • Input power standby @ 230 VAC : < 30 mW
  • Active mode efficiency: > 82%
  • EMI: pre-compliance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA174V1 7 W dual output offline flyback converter for home appliances using VIPer0P Quick view

主な特徴

  • Zero-power input consumption ratified as per IEC62301 Clause 4.5 (PIN_ZPM < 5 mW at 230 VAC )
  • Negative output voltage easily set through the voltage divider
  • Five-star energy efficiency when operating with no load (PIN_no_load < 10 mW at 230 VAC )
  • Meets ErP Lot 6 Tier 2 requirements for household and office equipment
  • Meets European regulation 1275/2008 regarding eco-design requirements for standby and off-mode electric power consumption for household and office equipment
  • Compliant with the ErP Lot 6 Tier 2 requirements in off-mode
  • Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
  • Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
  • VIPer0P 800 V avalanche rugged technology and its embedded protections ensure enhanced system reliability
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6491HB Demonstration board for L6491 gate driver with smart shut down feature Quick view

主な特徴

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
製品型番
STEVAL-ISA184V1

5V/1.2A 12V/750mA double output flyback converter using VIPER37LD

主な特徴

  • Universal input mains range: 85 – 265 VAC ; frequency: 50 – 60 Hz
  • Output voltage 1: 5 V / 1.2 A
  • Output voltage 2: 12 V / 0.75 A
  • Very compact size
  • Standby mains consumption: < 40 mW at 230 VAC
  • Average efficiency: > 75%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM05F

500 W motor control power board based on STGIF5CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 500 W
  • Nominal current: up to 3.0 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • 32-pin motor control connector for interfacing with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM10F

1000 W motor control power board based on STGIF10CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1000 W
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM10B

1200 W motor control power board based on STGIB10CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 1200 W
  • Nominal current: up to 7 A
  • Input auxiliary voltage: up to 20 V DC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIB10CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs
  • Motor control connector (32-pin) to interface with ST MCU boards
  • Universal conception for further evaluation with breadboard and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM07F

700 W motor control power board based on STGIF7CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 - 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.2 A
  • Input auxiliary voltage: up to 20 V DC
  • Single or three-shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Uses the STGIF7CH60TS-L IGBT intelligent power module from the SLLIMM™ 2nd series IPMs
  • Motor control connector (32-pin) interfacing with ST MCU boards
  • Universal conception for further evaluation with bread board and testing pins
  • Very compact size

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI168V1

IIS2DH adapter board for a standard DIL 24 socket

主な特徴

  • Complete IIS2DH pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA178V1

5 V / 200 mA high voltage buck-converter based on VIPer01

主な特徴

  • Five-star energy efficiency for operation under no load (PIN_no_load < 20 mW @ 230 VAC )
  • Meets ErP Lot 6 Tier 2 requirements for household and office equipment
  • Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
  • Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
  • VIPer01 800V avalanche rugged technology and embedded protections ensure enhanced system reliability
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA182V1

8.4 W / 30 W peak power offline flyback converter using VIPER38HD

主な特徴

  • US input range: 85 – 132 VAC , frequency: 50 – 60 Hz
  • Output voltage / current: 12 V / 0.7 A (2.5 A peak)
  • Very compact size
  • Standby mains consumption: lower than 25 mW at 115 VAC
  • Min. active mode efficiency: 81.14%
  • Min. active mode at 10% load efficiency: 71.14%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA195V1

5 V / 0.36 A buck converter using VIPerPlus ? VIPer11

主な特徴

  • Universal AC main input voltage range: 85 VAC to 265 VAC
  • Output range: 5 V / 0.36 A
  • Rated output power: 1.8 W
  • Input power in standby at 230 VAC : less than 18 mW
  • Active mode efficiency: > 65%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA196V1

5 V / 1.2 A non-isolated flyback converter using VIPerPlus?VIPer114LS

主な特徴

  • Universal AC main input voltage range: 85VAC to 265VAC
  • Output voltage: 5 V
  • Output current: 1.2 A
  • Rated output power: 6 W
  • No load input power @230 VAC : < 10 mW
  • Active mode efficiency: > 78%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA197V1

12 V, 7.8 W isolated flyback converter based on VIPer114LS

主な特徴

  • Universal input mains range: 90 – 265VAC , frequency: 50 – 60 Hz
  • Output voltage: 12 V
  • Output current: 0.65 A
  • Very compact size
  • Stand-by mains consumption: < 20 mW at 230VAC
  • Average efficiency: > 81%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG3Q

300 W motor control power board based on STGIPQ3H60T-H SLLIMM™-nano IPM

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 300 W
  • Nominal current: up to 1.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ3H60T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA177V1

5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01

主な特徴

  • Universal AC main input voltage range: 85VAC to 265VAC
  • Output range: 5 V / 0.85 A
  • Rated output power: 4.25 W
  • Input power in standby @ 230 VAC : < 9 mW
  • Active mode efficiency: > 74%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA180V1

12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P

主な特徴

  • Universal AC main input voltage range: 85 to 265 VAC
  • Output range: 12 V - 0.6 A
  • Rated output power: 7.2 W
  • Input power in standby @ 230 VAC : less than 18 mW
  • Active mode efficiency: > 80%
  • EMI: according to EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA192V1

7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L

主な特徴

  • Smart standby architecture using the zero power mode (ZPM) for capacitive touch sensing in consumer electronics applications
  • Enhanced system reliability thanks to VIPer0P 800 V avalanche rugged technology and its embedded protection
  • Minimized system input power consumption: less than 30 mW at 230 VAC in ZPM
  • IEC55022 Class B conducted EMI compliant, even with reduced EMI filter, thanks to the frequency jittering feature
  • IEC61000-4-2 (ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge) compliant
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPM08B

800 W motor control power board based on STGIB8CH60TS-L SLLIMM™ 2nd series IPM

主な特徴

  • Input voltage: 125 to 400 VDC
  • Nominal power: up to 800 W
  • Nominal current: up to 4.8 A
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three- shunt resistors for current sensing (with sensing network)
  • Two options for current sensing: dedicated op-amps or through MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series of SLLIMM IPM (STGIB8CH60TS-L – DBC package)
  • Motor control connector (32 pin) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

主な特徴

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

主な特徴

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • リセットボタン
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVALSTDRV600HB8

Demonstration board kit for L638xE and L639x high-voltage gate drivers

主な特徴

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

さらに表示

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-GLA001V1

Triac and AC switch insulated control evaluation board

主な特徴

  • Insulated control of three different AC switches used to drive AC loads up to 1 kW (230 Vrms) for residential appliances
  • Interface with STM32 Nucleo-64 development board
  • Three control modes available thanks to STM32 Nucleo-64 firmware (continuous or pulse gate current, timer option and phase control)
  • Easy to configure through user-friendly interface
  • Compatible with any external microcontroller
  • Input voltage range: 90 VAC to 265 VAC 50 / 60 Hz
  • Operating temperature: 0 °C to 60 °C
  • 5 V and 3.3 V insulated power supply
  • Low standby power losses (< 300 mW)
  • Criteria A @ 2 kV IEC 61000-4-4
  • Criteria B @ 4 kV IEC 61000-4-4
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG8Q

600 W motor control power board based on STGIPQ8C60T-HZ SLLIMM™-nano IPM

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 600 W
  • Nominal current: up to 4.8 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ8C60T-HZ – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM1N

60 W motor control power board based on STIPN1M50T-H SLLIMM™nano IPM MOSFET

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 60 W
  • Nominal current: up to 0.35 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN1M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNM2N

100 W motor control power board based on STIPN2M50T-H SLLIMM™nano IPM MOSFET

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 100 W
  • Nominal current: up to 0.6 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • Intelligent power module:
    • SLLIMM-nano IPM MOSFET-based (STIPN2M50T-H – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IPMNG5Q

450 W motor control power board based on STGIPQ5C60T-HZ SLLIMM™-nano IPM

主な特徴

  • Input voltage: from 125 to 400 VDC
  • Nominal power: up to 450 W
  • Nominal current: up to 3 Arms
  • Input auxiliary voltage: up to 20 VDC
  • Single- or three-shunt resistors for current sensing (with sensing network)
  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-nano op-amp (single) or via MCU
  • Overcurrent hardware protection
  • IPM temperature monitoring and protection
  • Hall sensor or encoder input
  • IGBT intelligent power module:
    • 2nd series SLLIMM-nano IPM (STGIPQ5C60T-HZ – full molded package)
  • Motor control connector (32 pins) interfacing with ST MCU boards
  • Universal design for further evaluation with bread board and testing pins
  • Very compact size
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI183V1

LPS33HW adapter board for a standard DIL24 socket

主な特徴

  • Complete LPS33HW pinout for a standard DIL 24 socket
  • Fully compatible with and STEVAL-MKI109V3 motherboards
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-SCR001V1

Inrush current solution with bypass SCR

主な特徴

  • Two high-temperature thyristors (SCR) in D²PAK package to bypass the inrush resistor
  • Compact SMD solution: 26 x 26 mm (≈ 1 sq. in)
  • Simple drive circuit: 2 low voltage transistors and 7 resistors (no MCU)
  • Requires an unregulated power supply (12 V typ.; created from a secondary winding)
  • Compatible with PFC and fly-back converter
  • Suitable for applications from 50 W up to 800 W (230 VRMS , TAMB  = 60 °C)
  • Input voltage range: 90-265 VAC , 50/60 Hz
  • Robust and immune (2 kV IEC 61000-4-5, 2.5 kV IEC 61000-4-4) and low EMI noise (EN55014) solution
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI185V1

IIS2MDC adapter board for a standard DIL24 socket

主な特徴

  • Complete IIS2MDC pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109V3 motherboard
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6498L

Evaluation board for the L6498L gate driver

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6494L

Demonstration board for L6494L gate driver

主な特徴

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber

主な特徴

  • High voltage rail up to 600V
  • Driver supply input voltage range 9V-20V
  • STGD6M65DF2 IGBTs power stage featuring:
    • V(BR)CES = 650 V
    • VCE(sat) = 1.55 V @ IC = 6 A
  • Dual footprint for IGBT/MOSFET package:
    • DPAK
    • PowerFlat 8x8
  • Selectable single or 3-shunt current sensing topology:
    • Sensored or sensorless BEMF detection
    • FOC or 6-Step algorithm
  • SmartShutdown overcurrent protection
  • Hall effect sensors connector
  • Bus voltage sensing
  • 450V bulk capacitor
  • Connector for interfacing with MCU
  • RoHS compliant

さらに表示

STEVAL-IHM032V1

150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control

主な特徴

  • Compact size
  • Wide-range input voltage
  • Maximum power up to 150 W at 230 Vac input
  • STGD3HF60HD: 4.5 A, 600 V very fast IGBT
  • Compatibility with other power switches in DPAK packages (the STD5N52U and STGD6NC60HD, for example)
  • AC or DC bus voltage power supply connectors
  • Connector for interfacing with the STM3210xx-EVAL board, STEVAL-IHM022V1, and STEVAL-IHM033V1 with alternate functions (current reference, current limitation/regulation, method selection, current boost)
  • Efficient DC/DC power supply (15 V, 3.3 V)
  • Suitable both for sinusoidal FOC and trapezoidal BLDC drive
  • Single-shunt current reading topology with fast operational amplifier (with offset insertion for bipolar currents)
  • Hardware overcurrent protection with boost capabilities
  • Temperature sensor
  • BEMF-detection network for BLDC drive
  • Current regulation/limitation network for BLDC drive
  • Hall sensor/quadrature encoder inputs

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM036V1

Low power motor control board featuring the SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

主な特徴

  • Complete 100 W power inverter solution
  • HV supply: 90 to 285 V AC or direct DC at 125 to 400 V DC
  • Input inrush limiter based on NTC resistor
  • Single shunt resistor current-sensing method
  • Overtemperature and overcurrent hardware protection
  • Compact and safe design
  • Test points available to allow further evaluation
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6393FB

Low voltage full bridge reference design board featuring L6393 advanced high-voltage gate driver

主な特徴

  • ~150 W drive capability (50 V - 3.0 Ar.m.s. )
  • Very low area occupation, all devices and power switches in SMD package (no heatsink)
  • Fast-decay or slow-decay on-board constant off-time peak current control
  • PWM voltage mode control with overcurrent protection possible via external logic signals
  • Driver supply voltage on-board generation directly from BUS voltage
  • Carefully optimized layout

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM041V1

Universal motor driver with speed control based on the STM8 and Triac (US version)

主な特徴

  • Input voltage 120 V/60 Hz
  • Motor current: 7 A RMS
  • Phase control for universal motor drive
  • Open loop or closed loop speed regulation
  • Voltage and current sensing, for sensorless operation (optional)
  • Debug outputs
  • AC tach, Hall sensor or opto-sensor for speed feedback
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM040V1

BLDC/PMSM driver demonstration board based on STM32 and the SLLIMM nano™

主な特徴

  • Extended AC input mains range: 115 or 230 VAC nominal at 50/60 Hz, or DC input voltage between 150 and 350 VDC
  • Output current: 0.5 ARMS to the motor
  • Power stage: 3-phase inverter bridge implemented using the STGIPN3H60 SLLIMM-nano intelligent power module
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM
STEVAL-ISA115V1

12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS

主な特徴

  • Universal input mains range:
    • input voltage: 90 VAC - 264 VAC
    • frequency: 45 Hz - 65 Hz
  • Single-output voltage: 12 V @ 0.15 A continuous operation
  • Standby mains consumption: < 50 mW @ 265 VAC
  • Average efficiency: > 75%
  • Fully protected against faults (overload, feedback disconnection and overheating)
  • EMI: in accordance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM035V2

3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMM™-nano)

主な特徴

  • Nominal power: up to 100 W
  • Compatible with 3.3 V and 5 V control board
  • Single shunt resistor for current reading
  • On-board temperature sensor
  • Overcurrent protection with boost/disabling capability
  • For six-step drives:
    • Current limitation/regulation network
    • BEMF detection network
  • MC connector
  • Compatible with sinusoidal and trapezoidal control
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM045V1

3-phase high voltage inverter power board for FOC based on the STGIPN3H60A (SLLIMM™-nano)

主な特徴

  • Wide-range input voltage (30-270 Vac)
  • Maximum power up to 100 W at 230 Vac input
  • Based on the STGIPN3H60A SLLIMM™-nano AC motor drive
  • Mounts the VIPer06 fixed frequency offline converter from the VIPer™ plus family
  • Efficient DC-DC power supply (15 V, 3.3 V)
  • DC bus voltage power supply connectors
  • External 15 V input
  • Dedicated connector for interfacing with the various other ST evaluation boards
  • Suitable for sinusoidal FOC drives
  • Selectable single or three-shunt current reading topology with fast operational amplifier
  • Configurable for direct motor current sampling from shunt resistors
  • Hardware overcurrent detecting network
  • Temperature sensor
  • Hall sensor/quadrature encoder inputs
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA140V1

15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE

主な特徴

  • AC Main Input voltage range: 100 VAC to 265 VAC
  • Mains frequency (fL ): 50 Hz / 60 Hz
  • Output voltage typ: 12 V
  • Output current: 1.25 A
  • Output ripple voltage: 50 mV
  • Rated output power: 15 W
  • Input power in standby @230 VAC : 50 mW
  • Active mode efficiency: 78%
  • Ambient operating temperature: 60 °C
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA153V1

12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE

主な特徴

  • Universal input mains range: 90 – 265 VAC frequency: 50 - 60 Hz
  • Output voltage/current: 12 V/1.25 A (1.65 A peak)
  • Very compact size
  • Standby mains consumption: lower than 30 mW at 230 VAC
  • Minimum active mode efficiency: 81.55%
  • Minimum active mode at 10% load efficiency: 71.55%
  • EMI: in accordance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IHM023V3

1 kW 3-phase motor control evaluation board featuring L6390 drivers and STGP10H60DF IGBT

主な特徴

  • Minimum input voltage: 125 VDC or 90 VAC
  • Maximum input voltage: 400 VDC or 285 VAC
  • Input voltage range with applied input voltage doubler from 65 VAC to 145 VAC
  • Voltage range for low-voltage motor control applications from 18 VDC to 35 VDC
  • Possibility to use auxiliary +15 V supply voltage
  • Maximum output power for motors: up to 1 kW
  • Regenerative brake control
  • Input inrush limitation with bypass relay
  • + 15 V auxiliary power supply based on buck converter with VIPer16
  • IGBT power switch STGP10H60DF in a TO- 220 package - compatible with other ST IGBTs or power MOSFETs in the TO-220 package
  • Fully populated board design with test points and isolated plastic cover for safety
  • Motor control connector for interface with the STM3210B-EVAL board and other ST motor control dedicated kits
  • Tachometer input
  • Hall/encoder inputs
  • Possibility to connect BEMF daughterboard for sensorless six-step control of BLDC motors
  • PCB type and size:
    • PCB material: FR-4
    • Double-sided layout
    • Copper thickness: 60 μm
    • Total dimensions of board: 127 mm x 180 mm
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA171V1

12 V - 15 W quasi resonant flyback converter based on the VIPER35HD

主な特徴

  • Wide input voltage range: 90 VAC to 264 VAC
  • Output voltage: 12 V
  • Output current: 1.25 A
  • Rated output power: 15 W
  • Quasi resonant operation
  • Input power standby @ 230 VAC : < 30 mW
  • Active mode efficiency: > 82%
  • EMI: pre-compliance with EN55022-Class-B
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA174V1

7 W dual output offline flyback converter for home appliances using VIPer0P

主な特徴

  • Zero-power input consumption ratified as per IEC62301 Clause 4.5 (PIN_ZPM < 5 mW at 230 VAC )
  • Negative output voltage easily set through the voltage divider
  • Five-star energy efficiency when operating with no load (PIN_no_load < 10 mW at 230 VAC )
  • Meets ErP Lot 6 Tier 2 requirements for household and office equipment
  • Meets European regulation 1275/2008 regarding eco-design requirements for standby and off-mode electric power consumption for household and office equipment
  • Compliant with the ErP Lot 6 Tier 2 requirements in off-mode
  • Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
  • Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
  • VIPer0P 800 V avalanche rugged technology and its embedded protections ensure enhanced system reliability
  • RoHS compliant

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6491HB

Demonstration board for L6491 gate driver with smart shut down feature

主な特徴

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

さらに表示

画像

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4479
      12 V, 15 W peak 20 W isolated flyback converter based on VIPer38LE
      1.0
      1.08 MB
      PDF
      AN4260
      12 V, 150 mA non-isolated buck converter using the VIPER06XS, from the VIPer™ plus family
      4.2
      3.5 MB
      PDF
      AN5057
      12 V, 7.8 W isolated flyback converter based on VIPer114LS
      1.0
      2.34 MB
      PDF
      AN4924
      12 V, 8.4 W peak power 30 W isolated flyback converter using VIPer38HD
      1.0
      2.94 MB
      PDF
      AN4812
      15 W, 12 V output, isolated flyback converter using Viper35HD device from the VIPer™ Plus family of high voltage converters
      1.0
      1.5 MB
      PDF
      AN4830
      15 W, 5 V - 12 V double output, isolated flyback converter based on Viper37LE/D
      1.0
      3.13 MB
      PDF
      AN4941
      7 W dual output (-5 V/+7 V) non-isolated flyback converter with capacitive touch sensing using VIPer0P and STM32L052
      1.0
      3.43 MB
      PDF
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4966
      Design guidelines for the shutdown function in the SLLIMM-nano series
      1.0
      1.54 MB
      PDF
      AN4503
      Environmental sensors: Hardware abstraction layer for Android
      3.0
      241.61 KB
      PDF
      AN4722
      HTS221 digital humidity sensor: hardware guidelines for system integration
      1.0
      844.49 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4544
      IGBT datasheet tutorial
      1.1
      2.4 MB
      PDF
      AN2648
      Increasing the resolution of analog temperature sensors
      1.4
      161.7 KB
      PDF
      AN994
      L638xE application guide
      7.1
      560.1 KB
      PDF
      AN1299
      L638xE tricks and tips
      3.0
      718.2 KB
      PDF
      AN2738
      L6390 half-bridge gate driver
      2.3
      3.12 MB
      PDF
      AN5063
      LPS33HW digital pressure sensor: guidelines for system integration
      1.0
      681.3 KB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN4768
      SLLIMM™ 2nd series small low-loss intelligent molded module
      4.0
      23.7 MB
      PDF
      AN3338
      SLLIMM™ small low-loss intelligent molded module
      2.0
      5.96 MB
      PDF
      AN4840
      SLLIMM™-nano 2nd series small low-loss intelligent molded module
      1.0
      3.63 MB
      PDF
      AN4043
      SLLIMM™-nano small low-loss intelligent molded module
      2.0
      8.28 MB
      PDF
      AN4836
      STEVAL-ISA174V1: VIPer0P 7 W double output non-isolated flyback
      2.0
      4.05 MB
      PDF
      AN4855
      STEVAL-ISA177V1 5 V/4.25 W non-isolated flyback demo with VIPer01
      2.0
      8.82 MB
      PDF
      AN4858
      STEVAL-ISA178V1 5 V/1 W 30 kHz buck demo with VIPer01
      1.0
      1.84 MB
      PDF
      AN4905
      STEVAL-ISA180V1 12 V/0.6 A isolated flyback demo with VIPer0P
      1.0
      2.55 MB
      PDF
      AN5081
      STEVAL-ISA195V1: 5 V/1.8 W 30 kHz buck demo with the VIPer11
      2.0
      4.1 MB
      PDF
      AN5072
      STEVAL-ISA196V1: VIPer11 5V/1.2A non-isolated flyback
      1.0
      4.21 MB
      PDF
      AN4419
      VIPER37HE: 15 W wide range single output evaluation board
      1.0
      1.42 MB
      PDF
      AN1471
      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?
      4.4
      72.36 KB
      PDF
      AN4479

      12 V, 15 W peak 20 W isolated flyback converter based on VIPer38LE

      AN4260

      12 V, 150 mA non-isolated buck converter using the VIPER06XS, from the VIPer™ plus family

      AN5057

      12 V, 7.8 W isolated flyback converter based on VIPer114LS

      AN4924

      12 V, 8.4 W peak power 30 W isolated flyback converter using VIPer38HD

      AN4812

      15 W, 12 V output, isolated flyback converter using Viper35HD device from the VIPer™ Plus family of high voltage converters

      AN4830

      15 W, 5 V - 12 V double output, isolated flyback converter based on Viper37LE/D

      AN4941

      7 W dual output (-5 V/+7 V) non-isolated flyback converter with capacitive touch sensing using VIPer0P and STM32L052

      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4966

      Design guidelines for the shutdown function in the SLLIMM-nano series

      AN4503

      Environmental sensors: Hardware abstraction layer for Android

      AN4722

      HTS221 digital humidity sensor: hardware guidelines for system integration

      AN2972

      How to design an antenna for dynamic NFC tags

      AN4544

      IGBT datasheet tutorial

      AN2648

      Increasing the resolution of analog temperature sensors

      AN994

      L638xE application guide

      AN1299

      L638xE tricks and tips

      AN2738

      L6390 half-bridge gate driver

      AN5063

      LPS33HW digital pressure sensor: guidelines for system integration

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN4768

      SLLIMM™ 2nd series small low-loss intelligent molded module

      AN3338

      SLLIMM™ small low-loss intelligent molded module

      AN4840

      SLLIMM™-nano 2nd series small low-loss intelligent molded module

      AN4043

      SLLIMM™-nano small low-loss intelligent molded module

      AN4836

      STEVAL-ISA174V1: VIPer0P 7 W double output non-isolated flyback

      AN4855

      STEVAL-ISA177V1 5 V/4.25 W non-isolated flyback demo with VIPer01

      AN4858

      STEVAL-ISA178V1 5 V/1 W 30 kHz buck demo with VIPer01

      AN4905

      STEVAL-ISA180V1 12 V/0.6 A isolated flyback demo with VIPer0P

      AN5081

      STEVAL-ISA195V1: 5 V/1.8 W 30 kHz buck demo with the VIPer11

      AN5072

      STEVAL-ISA196V1: VIPer11 5V/1.2A non-isolated flyback

      AN4419

      VIPER37HE: 15 W wide range single output evaluation board

      AN1471

      What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?

    • 概要 バージョン サイズ アクション
      TN1219
      HTS221 digital humidity sensor: reference design implementation
      2.0
      367.08 KB
      PDF
      TN1251
      How to interpret pressure and temperature readings in the LPS33HW pressure sensor
      1.0
      197.58 KB
      PDF
      TN1218
      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor
      4.0
      3.67 MB
      PDF
      TN1221
      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)
      1.0
      542.38 KB
      PDF
      TN1220
      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)
      1.0
      604.33 KB
      PDF
      TN0107
      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)
      4.0
      698.06 KB
      PDF
      TN1037
      SLLIMM™-nano mounting instructions and heatsink
      3.0
      1.21 MB
      PDF
      TN1219

      HTS221 digital humidity sensor: reference design implementation

      TN1251

      How to interpret pressure and temperature readings in the LPS33HW pressure sensor

      TN1218

      Interpreting humidity and temperature readings in the HTS221 digital humidity sensor

      TN1221

      Mounting instruction for SLLIMM™ -nano 2nd series (N2DIP-26L)

      TN1220

      Mounting instruction for SLLIMM™ 2nd series (SDIP2F-26L full molded and SDIP2B-26L DBC based)

      TN0107

      Mounting instructions for STMicroelectronics SLLIMM™ (small low-loss intelligent molded module)

      TN1037

      SLLIMM™-nano mounting instructions and heatsink

    • 概要 バージョン サイズ アクション
      UM1036
      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60
      2.0
      1.58 MB
      PDF
      UM0969
      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A
      2.0
      3.07 MB
      PDF
      UM1483
      Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B
      1.1
      591.59 KB
      PDF
      UM2325
      ST PowerStudio パワー・デバイス用動的電気・熱シミュレーション・ソフトウェア
      1.0
      3.61 MB
      PDF
      UM1036

      2 kW 3-phase motor control STEVAL-IHM028V2 evaluation board featuring the IGBT intelligent power module STGIPS20C60

      UM0969

      3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A

      UM1483

      Low power motor control board STEVAL-IHM036V1 featuring SLLIMM™ STGIPN3H60 and MCU STM32F100C6T6B

      UM2325

      ST PowerStudio パワー・デバイス用動的電気・熱シミュレーション・ソフトウェア

    • 概要 バージョン サイズ アクション
      DT0096
      LPS33HW digital pressure sensor: hardware guidelines for system integration
      1.0
      233.85 KB
      PDF
      DT0096

      LPS33HW digital pressure sensor: hardware guidelines for system integration

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      ST MEMS Longevity Program 1.0
      471.09 KB
      PDF
      ST PowerStudio overview 1.0
      1.81 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF

      ST MEMS Longevity Program

      ST PowerStudio overview

      ST25DV-I2C product presentation

Publications and Collaterals

    • 概要 バージョン サイズ アクション
      Industrial MEMS motion sensors 1.0
      659.27 KB
      PDF
      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules 1.0
      1.14 MB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      831.22 KB
      PDF
      Serial EEPROM 1.0
      1.73 MB
      PDF

      Industrial MEMS motion sensors

      SLLIMM™ 2nd Series: Small Low-Loss Intelligent Molded Modules

      ST25DV-I2C series - Dynamic NFC/RFID tags

      Serial EEPROM

    • 概要 バージョン サイズ アクション
      EEPROM selection guide 2.0
      475.96 KB
      PDF

      EEPROM selection guide

    • 概要 バージョン サイズ アクション
      モータ制御 リファレンス ガイド 15.11
      2.67 MB
      PDF
      NFC solutions from ST 1.0
      3.41 MB
      PDF
      VIPerPlus - Your SMPS design deserves a Plus 05.2018
      1,002 KB
      PDF
      VIPerPlus evaluation boards 05.2018
      1,002.52 KB
      PDF

      モータ制御 リファレンス ガイド

      NFC solutions from ST

      VIPerPlus - Your SMPS design deserves a Plus

      VIPerPlus evaluation boards

開発ツール・ハードウェア

    • 製品型番

      IGBT product finder application for Android and iOS

ソフトウェア製品

    • 製品型番

      ST PowerStudio dynamic electrothermal simulation software for power devices

    • 製品型番

      Sensor and DSP algorithm software expansion for STM32Cube

      Sensor and motion algorithm software expansion for STM32Cube

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

    • 製品型番

      Standard C platform-independent drivers for MEMS motion and environmental sensors

      Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

      Linux device drivers for MEMS motion and environmental sensors (Input framework)

    • 製品型番

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Software Development Kit for ST25 Tags and Dynamic Tags

eDesignSuite

コンバータ

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Diodes and Rectifiers

製品型番 概要
STPS2L40 40 V, 2 A Low Drop Power Schottky Rectifier
STPS360 60 V , 3 A Schottky Barrier, Power Schottky
STPS3H100 100 V, 3 A SMB High Voltage Power Schottky rectifier
STTH15AC06 600 V, 15 A Interleave Boost Ultrafast Diode
製品型番
40 V, 2 A Low Drop Power Schottky Rectifier
60 V , 3 A Schottky Barrier, Power Schottky
100 V, 3 A SMB High Voltage Power Schottky rectifier
600 V, 15 A Interleave Boost Ultrafast Diode

Imaging and Photonics Solutions

製品型番 概要
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
VL6180X Proximity sensor, gesture and ambient light sensing (ALS) module
製品型番
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
Proximity sensor, gesture and ambient light sensing (ALS) module

MEMS and Sensors

製品型番 概要
HTS221 Capacitive digital sensor for relative humidity and temperature
IIS2DH 3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
IIS2MDC High accuracy, ultra-low-power ,3-axis digital output magnetometer
LPS33HW Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751 2.25 V low-voltage local digital temperature sensor
製品型番
Capacitive digital sensor for relative humidity and temperature
3-axis digital accelerometer, ultra low-power high performance MEMS motion sensor
High accuracy, ultra-low-power ,3-axis digital output magnetometer
Piezoresistive absolute pressure sensor, 260-1260 hPa, digital output barometer, water resistant package
Analog temperature sensor, ultra-low current 2.4 V, high precision
2.25 V low-voltage local digital temperature sensor

NFC

製品型番 概要
ST25DV64K 64-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
製品型番
64-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Power Management

製品型番 概要
L6388E HV high and low side driver with embedded bootstrap diode