概要
ソリューション
HW評価ツール
リソース
ツール & ソフトウェア
主要製品
Get Started

混雑する市街地で乗用車や商用車を駐車するのは容易ではなく、時間とエネルギーの無駄である上、CO2排出の増加にもつながります。スマート・パーキング・システムは、ドライバがモバイル・アプリによって駐車場の空きスペースを見つけ、予約して料金を支払うことを可能にします。

スマート・パーキング・システムの設計を支援するため、STは、各種の測距 / 近接センサ、シンプルなクラウド接続を可能にする低消費電力のワイヤレス通信ソリューションとソフトウェア・パッケージや、低消費電力マイクロコントローラSTM32を提供しています。

    • This ST IoT Solution can be used to create a gateway that aggregates Smart Parking nodes on a 6LowPan 915MHz mesh network and bridge them via WiFi to the IBM Watson cloud. Device management of the sensor nodes is done in the cloud using a management protocol called LWM2M that allows configuration and monitoring of motion and proximity in applications such as Smart Appliances monitoring and control. Complete middleware to build applications to connect to Wi-Fi and IBM Watson cloud.
      Solution Components
      製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Buy All
      NUCLEO-F401RE

      主な特徴

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity
      Active
      STM32F401RE 12.74 Buy now
      X-NUCLEO-IDW01M1

      主な特徴

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo
      NRND
      SPWF01SA 22.05 Buy now
      X-NUCLEO-IDS01A5

      主な特徴

      • STM32 Nucleo expansion board based on the SPSGRF-915
      • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
      • SPGRF-915:
        • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
        • Integrated Balun (BALF-SPI-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connectors
      • Scalable solution; can cascade multiple boards for larger systems
      • Example firmware for point-to-point communication, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo
      Active
      SPSGRF-915 14.70 Buy now
      X-NUCLEO-6180XA1

      主な特徴

      • VL6180X proximity, gesture and ambient light sensing (ALS) module.
      • Slider switch controlling 2 functions:
        • Ranging measurement, beyond 400mm.
        • Ambient light sensing, up to 100 kLux1.
      • 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
      • Excellent ranging accuracy, independent of the reflectance of the target.
      • In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
      • Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
      • Basic gesture recognition application can be developed with one or multiple VL6180X modules.
      • Compatible with STM32 Nucleo board family.
      • Equipped with ArduinoTM UNO R3 connector.
      • RoHS compliant.
      • Full system SW supplied, download from www.st.com/vl6180x.

      続きを読む

      IMAGE

      X-NUCLEO-6180XA1
      X-NUCLEO-6180XA1

      注目リソース

      ガーバーファイル
      Proximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo
      Active
      VL6180X 20.83 Buy now
      FP-NET-6LPWIFI1

      主な特徴

      • Complete firmware to connect 6LoWPAN and Wi-Fi networks
      • Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
      • Support for mesh networking technology via the standard RPL protocol
      • Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
      • Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-NET-6LPWIFI1
      FP-NET-6LPWIFI1
      STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network
      Active
      -
      ソフトウェア
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-NET-6LPWIFI1 STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 3.0.0 ST -
      NUCLEO-F401RE

      Description:

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity

      Price (US$)*

      12.74

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      X-NUCLEO-IDW01M1

      Description:

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo

      Price (US$)*

      22.05

      Key features

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      X-NUCLEO-IDS01A5

      Description:

      Sub-1 GHz RF expansion board based on the SPSGRF-915 module for STM32 Nucleo

      Price (US$)*

      14.70

      Key features

      • STM32 Nucleo expansion board based on the SPSGRF-915
      • X-NUCLEO-IDS01A5 contains FCC and IC certified module SPSGRF-915 (FCC ID: S9NSPSGRF and IC: 8976C-SPSGRF)
      • SPGRF-915:
        • 915 MHz FCC and IC certified module based on low-power, low-rate sub-1 GHz SPIRIT1 transceiver
        • Integrated Balun (BALF-SPI-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connectors
      • Scalable solution; can cascade multiple boards for larger systems
      • Example firmware for point-to-point communication, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      X-NUCLEO-6180XA1

      Description:

      Proximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo

      Price (US$)*

      20.83

      Key features

      • VL6180X proximity, gesture and ambient light sensing (ALS) module.
      • Slider switch controlling 2 functions:
        • Ranging measurement, beyond 400mm.
        • Ambient light sensing, up to 100 kLux1.
      • 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
      • Excellent ranging accuracy, independent of the reflectance of the target.
      • In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
      • Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
      • Basic gesture recognition application can be developed with one or multiple VL6180X modules.
      • Compatible with STM32 Nucleo board family.
      • Equipped with ArduinoTM UNO R3 connector.
      • RoHS compliant.
      • Full system SW supplied, download from www.st.com/vl6180x.

      続きを読む

      IMAGE

      X-NUCLEO-6180XA1
      X-NUCLEO-6180XA1

      FEATURED RESOURCES

      gerber
      FP-NET-6LPWIFI1

      Description:

      STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Complete firmware to connect 6LoWPAN and Wi-Fi networks
      • Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
      • Support for mesh networking technology via the standard RPL protocol
      • Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
      • Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-NET-6LPWIFI1
      FP-NET-6LPWIFI1
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-NET-6LPWIFI1 STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 3.0.0 ST -
    • This ST IoT Solution can be used to create a gateway that aggregates Smart Parking nodes on a 6LowPan 868MHz mesh network and bridge them via WiFi to the IBM Watson cloud. Device management of the sensor nodes is done in the cloud using a management protocol called LWM2M that allows configuration and monitoring of motion and proximity in applications such as Smart Appliances monitoring and control. Complete middleware to build applications to connect to Wi-Fi and IBM Watson cloud.
      Solution Components
      製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Buy All
      NUCLEO-F401RE

      主な特徴

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity
      Active
      STM32F401RE 12.74 Buy now
      X-NUCLEO-IDW01M1

      主な特徴

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo
      NRND
      SPWF01SA 22.05 Buy now
      X-NUCLEO-IDS01A4

      主な特徴

      • STM32 Nucleo expansion board based on the SPSGRF-868
      • SPGRF-868 characteristics:
        • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
        • Integrated Balun (BALF-SPI-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connectors
      • Scalable solution; capable of cascading multiple boards for larger systems
      • Example firmware for point-to-point communication, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo
      Active
      SPSGRF-868 14.70 Buy now
      X-NUCLEO-6180XA1

      主な特徴

      • VL6180X proximity, gesture and ambient light sensing (ALS) module.
      • Slider switch controlling 2 functions:
        • Ranging measurement, beyond 400mm.
        • Ambient light sensing, up to 100 kLux1.
      • 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
      • Excellent ranging accuracy, independent of the reflectance of the target.
      • In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
      • Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
      • Basic gesture recognition application can be developed with one or multiple VL6180X modules.
      • Compatible with STM32 Nucleo board family.
      • Equipped with ArduinoTM UNO R3 connector.
      • RoHS compliant.
      • Full system SW supplied, download from www.st.com/vl6180x.

      続きを読む

      IMAGE

      X-NUCLEO-6180XA1
      X-NUCLEO-6180XA1

      注目リソース

      ガーバーファイル
      Proximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo
      Active
      VL6180X 20.83 Buy now
      FP-NET-6LPWIFI1

      主な特徴

      • Complete firmware to connect 6LoWPAN and Wi-Fi networks
      • Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
      • Support for mesh networking technology via the standard RPL protocol
      • Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
      • Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-NET-6LPWIFI1
      FP-NET-6LPWIFI1
      STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network
      Active
      -
      ソフトウェア
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-NET-6LPWIFI1 STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 3.0.0 ST -
      NUCLEO-F401RE

      Description:

      STM32 Nucleo-64 development board with STM32F401RE MCU, supports Arduino and ST morpho connectivity

      Price (US$)*

      12.74

      Key features

      • Common features
        • STM32 microcontroller in LQFP64 package
        • 1 user LED shared with Arduino™
        • 1 user and 1 reset push-buttons
        • 32.768 kHz crystal oscillator
        • Board connectors:Arduino™ Uno V3 expansion connectorST morpho extension pin headers for full access to all STM32 I/Os
        • Flexible power-supply options: ST-LINK, USB VBUS or external sources
        • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
        • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
        • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
      • Board-specific features
        • External SMPS to generate Vcore logic supply
        • 24 MHz HSE
        • Board connectors:External SMPS experimentation dedicated connectorMicro-AB or Mini-AB USB connector for the ST-LINKMIPI® debug connector
        • Arm® Mbed Enabled™ compliant

      続きを読む

      X-NUCLEO-IDW01M1

      Description:

      Wi-Fi expansion board based on SPWF01SA module for STM32 Nucleo

      Price (US$)*

      22.05

      Key features

      • X-NUCLEO-IDW01M1 hosts FCC, IC and CE certified SPWF01SA module (FCC ID: VRA-SG9011203, IC: 7420A-SG9011203 and ETSI compliant)
      • SPWF01SA module major characteristics:
        • low power IEEE 802.11 b/g/n transceiver
        • integrated SMD antenna
        • STM32 ARM Cortex-M3, with 64 KB RAM and 512KB FLASH memory
        • 1 MByte extended flash for FW update over the air (FOTA)
        • integrated protocol stacks: TCP/IP, TLS/SSL
        • application layer functions: web server supporting dynamic web pages, REST API to get & post web content
        • WEP/WPA/WPA2 personal security
        • system modes: station, IBSS, and miniAP
        • 16 configurable GPIOs available
        • simple AT command set host interface through UART
      • compatible with STM32 Nucleo boards
      • equipped both with ST morpho connector and Arduino UNO R3 connectors
      • scalable solution; it can cascade multiple boards for larger systems
      • free development firmware library and examples, compatible with STM32Cube
      • RoHS compliant

      続きを読む

      X-NUCLEO-IDS01A4

      Description:

      Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo

      Price (US$)*

      14.70

      Key features

      • STM32 Nucleo expansion board based on the SPSGRF-868
      • SPGRF-868 characteristics:
        • 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
        • Integrated Balun (BALF-SPI-01D3)
        • Chip antenna
      • Compatible with STM32 Nucleo boards
      • Equipped with Arduino UNO R3 connectors
      • Scalable solution; capable of cascading multiple boards for larger systems
      • Example firmware for point-to-point communication, compatible with STM32Cube firmware
      • RoHS compliant

      続きを読む

      X-NUCLEO-6180XA1

      Description:

      Proximity and ambient light sensor expansion board based on VL6180X for STM32 Nucleo

      Price (US$)*

      20.83

      Key features

      • VL6180X proximity, gesture and ambient light sensing (ALS) module.
      • Slider switch controlling 2 functions:
        • Ranging measurement, beyond 400mm.
        • Ambient light sensing, up to 100 kLux1.
      • 4-digit display, displaying either the distance of a target from the proximity sensor, or the lux value from the ambient light sensing (ALS).
      • Excellent ranging accuracy, independent of the reflectance of the target.
      • In order to easily integrate multiple VL6180X’s into customer devices, up to 3 external satellite VL6180X boards can be connected to the expansion board.
      • Satellite boards can be ordered on http://www.st.com/web/en/catalog/tools/PF261466 under the reference VL6180X-SATEL.
      • Basic gesture recognition application can be developed with one or multiple VL6180X modules.
      • Compatible with STM32 Nucleo board family.
      • Equipped with ArduinoTM UNO R3 connector.
      • RoHS compliant.
      • Full system SW supplied, download from www.st.com/vl6180x.

      続きを読む

      IMAGE

      X-NUCLEO-6180XA1
      X-NUCLEO-6180XA1

      FEATURED RESOURCES

      gerber
      FP-NET-6LPWIFI1

      Description:

      STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Complete firmware to connect 6LoWPAN and Wi-Fi networks
      • Middleware libraries to support Contiki OS and Contiki 6LoWPAN protocol stack 3.x, MQTT protocol and Wi-Fi connectivity
      • Support for mesh networking technology via the standard RPL protocol
      • Sample applications to connect a 6LoWPAN network node to a remote server with the OMA Lightweight M2M (LWM2M) protocol or to Watson IoT cloud services provided by IBM
      • Sample implementation available for the X-NUCLEO-S2868A1 expansion board connected to a B-L475E-IOT01A Discovery board
      • Easy portability across different MCU families, thanks to STM32Cube
      • Free, user-friendly license terms

      続きを読む

      IMAGE

      FP-NET-6LPWIFI1
      FP-NET-6LPWIFI1
      製品型番 概要 Software Version サプライヤ GitHub link ダウンロード
      FP-NET-6LPWIFI1 STM32Cube function pack for connecting 6LoWPAN IoT nodes to the Internet through a Wi-Fi Network 3.0.0 ST -

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 Version Size Action
      AN934
      How to use the digital calibration feature in TIMEKEEPER® and serial real-time clock (RTC) products
      4.1
      123.42 KB
      PDF
      AN1216
      Implementing a periodic alarm with TIMEKEEPER® and serial real-time clocks (RTCs)
      2.0
      192.89 KB
      PDF
      AN923
      Managing century information using serial real-time clocks and TIMEKEEPER® NVRAMs
      4.0
      142.23 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN1019
      Second source for SNAPHAT® using a dual footprint
      2.1
      66.19 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN934

      How to use the digital calibration feature in TIMEKEEPER® and serial real-time clock (RTC) products

      AN1216

      Implementing a periodic alarm with TIMEKEEPER® and serial real-time clocks (RTCs)

      AN923

      Managing century information using serial real-time clocks and TIMEKEEPER® NVRAMs

      AN576

      PCB layout optimisation

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN1019

      Second source for SNAPHAT® using a dual footprint

      AN316

      Transil™ clamping protection mode

プレゼンテーション & トレーニング資料

    • 概要 Version Size Action
      IoT World ST Smart Parking 1.0
      7.82 MB
      PDF

      IoT World ST Smart Parking

関連資料

    • 概要 Version Size Action
      STBC02/03 : Li-Ionチャージャ 負荷スイッチ & リセット・ジェネレータ内蔵 バッテリ・マネージメントIC 04.2017
      644.62 KB
      PDF
      DC-DC converters
      557.92 KB
      PDF
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      794.98 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      826.44 KB
      PDF

      STBC02/03 : Li-Ionチャージャ 負荷スイッチ & リセット・ジェネレータ内蔵 バッテリ・マネージメントIC

      DC-DC converters

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      Ultra-low clamping voltage 0201 ESD diodes

    • 概要 Version Size Action
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      Protection devices and integrated EMI filtering selection guide 2.0
      743.69 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

      Protection devices and integrated EMI filtering selection guide

    • 概要 Version Size Action
      ポータブル機器用 パワー・マネージメント 03.2017
      1,010.89 KB
      PDF

      ポータブル機器用 パワー・マネージメント

サポート &フィードバック