-
The SPC564Bxx and SPC56ECxx is a new family of next generation microcontrollers built on the Power Architecture embedded category. This document describes the features of the family and options available within the family members, and highlights important electrical and physical characteristics of the device.
The SPC564Bxx and SPC56ECxx family expands the range of the SPC560B microcontroller family. It provides the scalability needed to implement platform approaches and delivers the performance required by increasingly sophisticated software architectures. The advanced and cost-efficient host processor core of the SPC564Bxx and SPC56ECxx automotive controller family complies with the Power Architecture embedded category, which is 100 percent user-mode compatible with the original Power Architecture user instruction set architecture (UISA). It operates at speeds of up to 120 MHz and offers high performance processing optimized for low power consumption. It also capitalizes on the available development infrastructure of current Power Architecture devices and is supported with software drivers, operating systems and configuration code to assist with users implementations.
主な特徴
e200z4d, 32-bit Power Architecture®- up to 120 MHz and 200 MIPs operation
e200z0h, 32-bit Power Architecture- up to 80 MHz and 75 MIPs operation
Memory- Up to 3 MByte on-chip Flash with ECC
- Up to 256 KByte on-chip SRAM with ECC
- 64KByte on-chip Data Flash with ECC
- 16-entry memory protection unit (MPU)
- User selectable Memory BIST
Interrupts- 255 interrupt sources with 16 priority levels
- Up to 54 ext. IRQ including 30 wake-up
GPIOs: from 147 (LQFP176) to 199 (LBGA256)
System timer units- 8-ch. 32-bit periodic interrupt timer (PIT)
- 4-channel 32-bit system timer (STM)
- Safety System Watchdog Timer (SWT)
- Real-time clock timer (RTC/API)
eMIOS, 16-bit counter timed I/O units- Up to 64 channels with PWM/MC/IC/OC
Two ADC (10-bit and 12-bit)- Up to 62 channels extendable to 90 ch.
- Multiple Analog Watchdog
Dedicated diagnostic features for lighting- Advanced shiffted PWM generation
- ADC conversion synchronized on PWM
Communication interfaces- Up to 6 FlexCAN with 64 buffers each
- Up to 10 LINFlex/UART channels
- Up to 8 buffered DSPI channels
- I2C interface
- One FleyRay (dual-ch.) with 128 buffers
- Fast Ethernet Controller
Cryptographic Services Engine (CSE)- AES-128 en/decryption, CMAC auth.
- Secured device boot mode
32-ch. eDMA with multiple request sources
Clock generation- 4 to 40 MHz main oscillator
- 16 MHz internal RC oscillator
- Software-controlled FMPLL
- 128 kHz internal RC oscillator
- 32 kHz auxiliary oscillator
- Clock Monitoring Unit (CMU)
Low power capabilities- Ultra low power STANDBY
- CAN Sampler to store CAN ID in STBY
- Fast wake-up and exectute from RAM
Exhaustive debugging capability- Nexus 3+ interface on LBGA256 only
- Nexus 1 on all devices
Voltage supply- Single 5 V or 3.3 V supply
- On-chip Vreg with external ballast transitor
Operating temperature range -40 to 125 °C
サンプル & 購入
| 製品型番 | Marketing Status | Packing Type | CPU Clock Frequency (MHz) (max) | FLASH Size (kB) (Data) | Features set | Temperature (°C) | Budgetary Price (US$)* | 数量 | ECCN (US) | Country of Origin | More info | Order from Distributors | Order from ST | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小値 | max | |||||||||||||
| SPC564B74L8C9E0X |
Active
|
Tape And Reel | 120 | 64 | - | -40 | 125 | 14.05 | 1000 | 5A992C | MALTA | No availability of distributors reported, please contact our sales office | ||
SPC564B74L8C9E0X
Marketing Status
アクティブPacking Type
Tape And ReelUnit Price (US$)
14.05*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
Overview of the new SPC58 Family of microcontrollers for Automotive
Design Tools
-
-
写真 Part number 製造元 Description SEL-SPC5 -- Smart Selector for Micro 32bit Power Architecture products 製品型番Smart Selector for Micro 32bit Power Architecture products
-
開発ツール･ハードウェア
-
-
写真 Part number 製造元 Description CYCLONE P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. CYCLONE FX P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. DCI-GSI2 dSPACE dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming. Multilink Universal P&E Microcomputer Systems Debug Probe for ARM and other devices. Multilink Universal FX for SPC5 P&E Microcomputer Systems High-Speed Debug Probe for ARM and other devices. PowerDebug JTAG Debugger Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. 
SPC5-CONNECT ST Programmable interface for PC communication to automotive target systems. 
SPC5-UDESTK ST USB/JTAG debugger for SPC5 MCUs with software license included (by PLS) TRACE32 PowerTools Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. UDE/UAD2next for SPC5 PLS UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD2pro for SPC5 PLS UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD3+ for SPC5 PLS UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. XETK calibration interface ETAS The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface. iC5000 On-chip Analyzer iSYSTEM iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing. iC5700 On-chip Analyzer iSYSTEM iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development. iC6000 On-chip Analyzer with Aurora protocol support iSYSTEM iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface. 製品型番Automated, Stand-Alone Production Programmer, Debug & Test.
Automated, Stand-Alone Production Programmer, Debug & Test.
dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.
Debug Probe for ARM and other devices.
High-Speed Debug Probe for ARM and other devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Programmable interface for PC communication to automotive target systems.
USB/JTAG debugger for SPC5 MCUs with software license included (by PLS)
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface.
iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing.
iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development.
iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface.
-
-
-
写真 Part number 製造元 Description ASH/ETEC Ash Ware ETEC C Compiler Toolkit ASH/ETPU Ash Ware ETPU/ETPU2 Development Kit Arctic Studio - Development Tools ARCCORE AUTOSAR and embedded SW configuration. BYTE/eTPU Byte Craft eTPU_C Code Development System Diab Compiler Wind River The Proven Development Tool for Automotive Safety. EB tresos Studio - Development Tools Elektrobit AUTOSAR and embedded SW configuration. ECU Interface Software dSPACE dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing. ICDPPCNEXUS P&E Microcomputer Systems In-circuit debug software for SPC5 and similar devices. MULTI Integrated Development Environment Green Hills Software MULTI Integrated Development Environment MULTISPC56 Green Hills Software MULTI IDE PROGPPCNEXUS P&E Microcomputer Systems Flash programming software for SPC5 and similar devices. PowerView Debugger IDE Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. SPC5-STUDIO ST Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs SPC5-UDEDEBG ST PLS JTAG debugger software full license or license renewal TargetLink dSPACE The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®. UNITPPCNEXUS P&E Microcomputer Systems Interface library for SPC5-compatible PEmicro interfaces. WIND-WORKBENCH Wind River Wind River Workbench WinIDEASPC56 iSYSTEM winIDEA IDE isystem.connect iSYSTEM Automate your testing or other embedded debugging activitites with iSYSTEM's SDK. testIDEA iSYSTEM iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers. winIDEA Open iSYSTEM iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers. 製品型番ETEC C Compiler Toolkit
ETPU/ETPU2 Development Kit
AUTOSAR and embedded SW configuration.
eTPU_C Code Development System
The Proven Development Tool for Automotive Safety.
AUTOSAR and embedded SW configuration.
dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing.
In-circuit debug software for SPC5 and similar devices.
MULTI Integrated Development Environment
MULTI IDE
Flash programming software for SPC5 and similar devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs
PLS JTAG debugger software full license or license renewal
The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®.
Interface library for SPC5-compatible PEmicro interfaces.
Wind River Workbench
winIDEA IDE
Automate your testing or other embedded debugging activitites with iSYSTEM's SDK.
iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers.
iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers.
-
ソフトウェア製品
-
-
写真 Part number 製造元 Description CycurHSM ESCRYPT Powerful security software for your ECU. EB tresos Autocore SW Elektrobit AUTOSAR BSW components to be integrated with ST MCAL. K-SAR - AUTOSAR SUITE KPIT AUTOSAR and embedded SW configuration. ORIENTAIS - AUTOSAR SUITE ISOFT Infrastructure Software AUTOSAR and embedded SW configuration. RTA Solution ETAS AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU SPC5-CRYP-LIB -- Software Cryptography Library for SPC5 MCUs SPC56xMBP-FLASH ST Flash drivers for SPC56 M, B, C, D and P lines STSW-SPC56002FW ST LIN Drivers Libraries for SPC56 Microcontrollers STSW-SPC56AS005 ST SPC56 B/C Line MCAL for Autosar 4.0 (e200z4 core and Flash Memory size from 1.5 Mbyte on) 製品型番Powerful security software for your ECU.
AUTOSAR BSW components to be integrated with ST MCAL.
AUTOSAR and embedded SW configuration.
AUTOSAR and embedded SW configuration.
AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU
Software Cryptography Library for SPC5 MCUs
Flash drivers for SPC56 M, B, C, D and P lines
LIN Drivers Libraries for SPC56 Microcontrollers
SPC56 B/C Line MCAL for Autosar 4.0 (e200z4 core and Flash Memory size from 1.5 Mbyte on)
-
評価ツール
-
-
写真 Part number 製造元 Description 
SPC56B-Discovery ST Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 製品型番Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
-
Support and Applications
-
-
写真 Part number 製造元 Description Design consultancy + Training Intecs Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment. 製品型番Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment.
-
-
-
写真 Part number 製造元 Description SPC56XX 32-Bit Single-Core Power Architecture Training MicroConsult Technical training and consulting for SPC560/SPC570/SPC580 製品型番Technical training and consulting for SPC560/SPC570/SPC580
-
| 製品型番 | Marketing Status | パッケージ | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| SPC564B74L8C9E0X |
Active
|
LQFP 208 28x28x1.4 | オートモーティブ | Ecopack2 |
|
SPC564B74L8C9E0X
Package:
LQFP 208 28x28x1.4Material Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
