-
The P-NUCLEO-IOD01A1 is an STM32 Nucleo pack composed of the NUCLEO-L073RZ development board, the STEVAL-IOD003V1 evaluation board and the X-NUCLEO-IKS01A2 expansion board.
The STEVAL-IOD003V1 offers an IO-Link device PHY layer (L6362A) while the NUCLEO-L073RZ runs an IO-Link demo stack (developed by and property of TEConcept Gmbh) compatible with rev 1.1 and firmware controlling the X-NUCLEO-IKS01A2 sensors.
The STM32 Nucleo pack provides an affordable and easy-to-use solution for the development of IO-Link and SIO applications, L6362A communication features and robustness, together with the STM32L073RZT6 computation performance.主な特徴
- Equipped with Arduino UNO R3 connectors and compatible with STEVAL-IOD003V1, X-NUCLEO-IKS01A2 and NUCLEO-L073RZ boards.
- The STEVAL-IOD003V1 features:
- IO-Link (PHY) device layer based on L6362A
- Operating voltage range 6.5 to 35 V
- Dedicated CQ overload pin (wake-up)
- Diagnostics pin (UVLO, overtemperature and cut-off)
- UART interface
- Linear regulators for independent supply from +24 V bus (12 mA 3.3 V and 100 mA 12 V)
- LEDs for status and diagnostics
- Overload and overheating protections with non-dissipative cut-off function
- Full reverse polarity on IO-Link interface pins
- EMC protections according to IO-Link v1.1 and IEC 60947-5-2
- Ground and VCC wire break protections
- The X-NUCLEO-IKS01A2 features:
- LSM6DSL 3D accelerometer and 3D gyroscope
- LSM303AGR 3D accelerometer and 3D magnetometer
- LPS22HB pressure sensor
- HTS221 capacitive digital relative humidity and temperature
- DIL24 socket for additional MEMS adapters and other sensors
- Free comprehensive development firmware library and samples for all sensors compatible with STM32Cube firmware
- The NUCLEO-L073RZ features:
- STM32L073RZT6 32-bit microcontroller based on ARM® Cortex®-M0+ core
- Pre-programmed IO-Link device stack (v1.1 compatible)
- Arduino UNO R3 connectivity and ST morpho extension pin headers
- Mbed-enabled (http://mbed.org)
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
ビデオ
Guided tour into STM32 ODE and how it can help developers turn bright ideas into great products
The STM32 Open Development Environment is a flexible, easy and affordable way to develop innovative devices and applications. It is based on STM32 Nucleo boards and STM32Cube software.
開発環境
-
-
画像 製品型番 製造元 概要 
X-NUCLEO-IKS01A2 ST Motion MEMS and environmental sensor expansion board for STM32 Nucleo 製品型番Motion MEMS and environmental sensor expansion board for STM32 Nucleo
-
ソフトウェア製品
-
-
画像 製品型番 製造元 概要 
STSW-IOD003 ST L6362A IO-Link communication transceiver device IC evaluation software based on STM32Cube 
STSW-IODD01 ST IO-Link device description software for P-NUCLEO-IOD01A1 
STSW-IOLINKGUI ST Graphical user interface for the STEVAL-IOM001V1 and STEVAL-IOD003V1 IO-Link evaluation boards 製品型番L6362A IO-Link communication transceiver device IC evaluation software based on STM32Cube
IO-Link device description software for P-NUCLEO-IOD01A1
Graphical user interface for the STEVAL-IOM001V1 and STEVAL-IOD003V1 IO-Link evaluation boards
-
評価ツール
-
-
画像 製品型番 製造元 概要 
NUCLEO-L073RZ ST STM32 Nucleo-64 development board with STM32L073RZ MCU, supports Arduino and ST morpho connectivity 製品型番STM32 Nucleo-64 development board with STM32L073RZ MCU, supports Arduino and ST morpho connectivity
-
-
-
画像 製品型番 製造元 概要 
STEVAL-IOD003V1 ST IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo 製品型番IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo
-
| 製品型番 | 製品ステータス | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|
| P-NUCLEO-IOD01A1 | 量産中 | Ecopack2 | |
P-NUCLEO-IOD01A1
Package:
Ecopack2Material Declaration**:
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
