STEVAL-DPSLLCK1
Active
Design Win
3 kW Full Bridge LLC resonant digital power supply evaluation kit

Download databrief

製品概要

概要

The STEVAL-DPSLLCK1 is a digitally controlled 3 kW full bridge LLC resonant DC-DC converter with output synchronous rectification. The kit consists of a power board, digital control board, adapter board, and firmware modules.

The full bridge primary section of the LLC converter is based on MDmesh DM2 Power MOSFETs for high efficiency performance. The PWM switching frequency is digitally controlled to regulate the output voltage. The converter operates at near resonant frequencies to maximize efficiency and achieve Zero Voltage Switching (ZVS) over the entire operating range.

The HF transformer provides galvanic isolation and magnetic integration of the inductive elements for a compact design.

Synchronous rectification (SR) with STripFET F7 Power MOSFETs is employed on the secondary side to reduce conduction losses.

The STM32F334 microcontroller on the digital control board embeds a high resolution timer for finer regulation and can communicate status information via USART, CAN, SMBus, and opto-coupled serial communication.

Both the primary and secondary sections are supplied by an off-line flyback circuit based on VIPer27HD which provides regulated voltages to the control board, the gate driver ICs and the signal conditioning circuits.

You can connect a PFC to the power board and extend communication and interfacing with the supplied adapter board.

  • 機能一覧

    • Power ratings:
      • input DC voltage: 375 V to 425 V
      • output voltage: 48 V
      • maximum output current: 62.5 A
      • output power: 3 kW
      • peak efficiency: 95.3%
      • HF transformer isolation voltage: 4 kV
    • Resonant and switching frequencies:
      • max DC-DC switching frequency: 380 kHz (at startup)
      • closed loop switching frequency: 120 kHz to 250 kHz
      • resonant frequency: 175 kHz
    • Protection mechanisms:
      • undervoltage and overvoltage protection on input and output
      • overtemperature protection
      • short-circuit protection
      • forced cooling with air flow speed modulation according to the output power and temperature
    • Efficiency:
      • adaptive synchronous rectification
      • light load burst mode
    • Digital control with STM32F334 microcontroller

eDesignSuite

eDesignSuiteは、幅広いST製品を用いたシステム開発プロセスの効率化を支援する、使いやすい設計支援ユーティリティの包括的なセットです。

パワー・マネージメント設計センター

デバイス用熱電気シミュレータ

シグナル・コンディショニング設計ツール

NFC / RFIDカリキュレータ

Choose design tool:

パワー・マネージメント設計センター

電源設計ツール

SMPS設計(トポロジ別、タイプ別、製品別)
PFC design with analog and digitial control
さまざまなPCB構成をサポート
Choose type:
DC/DC
AC/DC
Solar Battery Charger

パワー・マネージメント設計センター

LED照明設計ツール

一般的なトポロジのAC-DCおよびDC-DC設計に対応
注釈付きのインタラクティブな回路図を表示
電流 / 電圧グラフ、ボード線図、効率曲線、電力損失データを提供
Choose type:
DC/DC
AC/DC

パワー・マネージメント設計センター

デジタル電源ワークベンチ

電源部と制御ループの設計を段階的に最適化
カスタム・アプリケーション用のSTM32Cube組み込みソフトウェア・パッケージを生成し、複数のSTM32 IDEと互換性のあるファームウェア・プロジェクトの生成が可能

パワー・マネージメント設計センター

パワー・ツリー・デザイナ

電源ツリー内の各ノードの入力 / 出力電力を指定
矛盾がないことを確認
個々のノードを設計
Choose design tool:

デバイス用熱電気シミュレータ

STPOWER Studio

長期ミッション・プロファイルをサポート
電力損失グラフと温度グラフを表示
ヒートシンクの熱特性の定義をサポート

デバイス用熱電気シミュレータ

PCB Thermal Simulator

Thermal analysis of a PCB from Gerber files.
Possibility to add heat sources, heat sinks, copper areas and thermal paths.
Powerful server-side engine for rendering and simulation.
Thermal results shown graphically via 2D table.

デバイス用熱電気シミュレータ

ACスイッチ・シミュレータ

定格とアプリケーション波形を選択
ジャンクション温度グラフとブロッキング電圧グラフを取得
最適なデバイスを検索およびソート

デバイス用熱電気シミュレータ

整流ダイオード・シミュレータ

定格とアプリケーション波形を選択
電力損失の推定
最適なデバイスを検索およびソート

デバイス用熱電気シミュレータ

TwisterSim

最適なViPOWER車載用パワー・デバイスの選択をサポート
負荷適合性、ワイヤ・ハーネスの最適化、故障状態解析、診断解析をサポート
さまざまなPCB構成をサポート

デバイス用熱電気シミュレータ

TVSシミュレータ

システム定格とサージ波形を指定
最適なデバイスを検索およびソート

デバイス用熱電気シミュレータ

Estimate

単純な回路図構築とファームウェア入力が数分で完了
バッテリ寿命、システム消費電力、部品(BOM)コストの信頼性の高い推定値を素早く生成
Choose design tool:

シグナル・コンディショニング設計ツール

アクティブ・フィルタ

多段設計と一般的なトポロジに対応
回路定数値を出力
ゲイン・グラフ、位相グラフ、群遅延グラフを表示
ロー・パス、ハイ・パス、バンド・パスフィルタに対応

シグナル・コンディショニング設計ツール

コンパレータ(ウィンドウ・コンパレータ機能搭載)

一般的な回路構成に対応
回路定数値を出力
I/O信号波形を提供
反転、非反転、ウィンドウコンパレータに対応

シグナル・コンディショニング設計ツール

ローサイド電流センス・アンプ

回路定数値を出力
電流誤差グラフを表示

シグナル・コンディショニング設計ツール

ハイサイド電流センス・アンプ

電流誤差グラフを表示
最適なハイサイド電流センス・アンプとシャント・デバイスの選択をサポート
Choose design tool:

NFC / RFIDカリキュレータ

NFCインダクタンス

形状と基板特性を入力
アンテナ・インピーダンスを取得

NFC / RFIDカリキュレータ

UHFリンク・バジェット

フォワードおよびリバース・リンクの特性を入力
リンク・バジェットの推定値を出力

NFC / RFIDカリキュレータ

NFCチューニング回路

アンテナ・パラメータと整合目標を入力
整合回路のトポロジを選択
設計目標の達成に必要な成分値を出力

Quality and Reliability

Part Number Marketing Status Package Grade RoHSコンプライアンスグレード WEEE Compliant Longevity Commitment Longevity Starting Date Material Declaration**
STEVAL-DPSLLCK1
Active
CARD Industrial Ecopack2 - - -

STEVAL-DPSLLCK1

Package:

CARD

Material Declaration**:

Marketing Status

Active

Package

CARD

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

Sample & Buy

Loading...
Part Number
製品ステータス
Budgetary Price (US$)*/Qty
STから購入
Order from distributors
Package
Packing Type
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Supplier
Core Product
Board production status
STEVAL-DPSLLCK1

販売代理店在庫 STEVAL-DPSLLCK1

販売代理店
地域 Stock 最小発注数量 パートナー企業リンク

販売代理店在庫データ:

販売代理店に在庫がない場合は、STのセールス・オフィスまでお問い合わせください

STEVAL-DPSLLCK1 Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

STEVAL-DPSLLCK1

Supplier:

ST

Core Product:

STM32F334, STW70N60DM2, STP310N10F7, VIPER27

Board production status:

-

販売代理店

販売代理店在庫データ:

(*)概算用の参考価格(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。