The STSPIN32F0 is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes.
It embeds a triple half-bridge gate driver able to drive power MOSFETs or IGBTs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function.
An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the MCU and external components. An internal LDO linear regulator provides the supply voltage for gate drivers.
The integrated operational amplifiers are available for the signal conditioning of the analog Hall-effect sensors and the shunt resistor signal.
A comparator with a programmable threshold is integrated to perform the overcurrent protection.
The integrated MCU (STM32F031C6 with extended temperature range, suffix 7 version) allows performing field-oriented control, the 6-step sensorless and other advanced driving algorithm including the speed control loop. It has the write-protection and read-protection feature for the embedded Flash memory to protect against unwanted writing and/or reading.
The STSPIN32F0 device also features overtemperature and undervoltage lockout protections and can be put in the standby mode to reduce the power consumption. The device provides 16 general-purpose I/O ports (GPIO) with the 5 V tolerant capability, one 12-bit analog-to-digital converter with up to 9 channels performing conversions in a single-shot or scan modes, 5 synchronizable general-purpose timers and supports an easy to use debugging serial interface (SWD).
- Extended operating voltage from 8 to 45 V
- Three-phase gate drivers
- 600 mA sink/source
- Integrated bootstrap diodes
- Cross-conduction prevention
- 32-bit ARM® Cortex®-M0 core:
- Up to 48 MHz clock frequency
- 4-kByte SRAM with HW parity
- 32-kByte Flash memory with option bytes used for write/readout protection
- 3.3. V DC/DC buck converter regulator with overcurrent, short-circuit, and thermal protection
- 12 V LDO linear regulator with thermal protection
- 16 general-purpose I/O ports (GPIO)
- 5 general-purpose timers
- 12-bit ADC converter (up to 9 channels)
- I2C, USART and SPI interfaces
- 4 rail-to-rail operation amplifiers for signal conditioning
- Comparator for overcurrent protection with programmable threshold
- 3FG open-drain output providing the decoded result of 3 Hall sensors inputs
- Standby mode for low power consumption
- UVLO protection on each power supply:
- VM, VDD, VREG and VBOOTx
- On-chip debug support via SWD
- Extended temperature range: -40 to +125 °C
Get to know STSPIN32F0 Advanced brushless DC motor drivers with embedded 32-bit MCU
ホーム / ビル / シティ･オートメーション
家庭用 & 業務用電気製品
産業用電源 / 産業用装置
|VFQFPN 48 7x7x1.0||インダストリアル||Ecopack2|
|VFQFPN 48 7x7x1.0||インダストリアル||Ecopack2|
VFQFPN 48 7x7x1.0
RoHS Compliance Grade
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Extend the Runtime of Your Battery-Powered ApplicationsSTSW-SPIN002
Evaluation software with graphical user interface for STSPIN motor driver ICs
X-NUCLEO expansion boards and X-CUBE softwareX-NUCLEO-IHM06A1
Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 NucleoX-CUBE-SPN6
Low voltage stepper motor driver software expansion for STM32CubeX-NUCLEO-IHM11M1
Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 NucleoX-CUBE-SPN11
Low voltage three-phase brushless DC motor driver software expansion for STM32CubeX-NUCLEO-IHM12A1
Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 NucleoX-CUBE-SPN12
Low voltage dual brush DC motor driver software expansion for STM32Cube