-
The ISO8200AQ is a galvanic isolated 8-channel driver featuring a very low supply current. It contains 2 independent galvanic isolated voltage domains (VCC and VDD for the Process and Control Logic stages, respectively). The IC is intended for driving any kind of load with one side connected to ground.
The Control Logic Stage features an 8-bit Output Status Register (where the μC sets the status ON/OFF of the output channels in the Process Stage) and an 8-bit Fault Register (where the OVT faults of each channel are stored). The two stages communicate through the galvanic isolation channel by an ST proprietary protocol.
Active channel current limitation (OVL) combined with thermal shutdown (OVT), independent for each channel, protects the device against overload and overtemperature.
Additional embedded functions are: loss of ground protection, VCC and VDD UVLOs (with hysteresis), watchdog and VCC Power GOOD.
An internal circuit provides an OR-wired not latched common (FAULT) indicator signaling the channel OVT. The (PGOOD) diagnostic pin is activated if VCC goes below the power good internal threshold. Both (FAULT) and (PGOOD) pins are open drain, active low, fault indication pins.主な特徴
- Vdemag = VCC - 45 V (per channel)
- RDS(on) = 0.120 Ω (per channel)
- IOUT = 0.7 A (per channel)
- VCC = 45 V
- SPI interface with daisy chaining
- 5 V and 3.3 V TTL/CMOS & μC compatible I/Os
- Common output enable/disable pin
- Fast demagnetization of inductive loads
- Reset function for IC outputs disable
- Very low supply current
- Undervoltage shutdown with auto restart and hysteresis
- Short-circuit protection
- Per-channel overtemperature protection
- Thermal independence of separate channels
- Case overtemperature protection
- Loss of Ground and Supply protections
- Overvoltage protection (VCC clamping)
- Common OVT fault open drain output
- Power GOOD open drain output
- High common mode transient immunity
- ESD protection
- Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-8
- UL1577 certified
サンプル & 購入
| 製品型番 | パッケージ | 梱包タイプ | 製品ステータス | 概算価格（USS） | 数量 | ECCN (US) | Country of Origin | 販売代理店からオーダー | STからオーダー |
|---|---|---|---|---|---|---|---|---|---|
| ISO8200AQTR | TFQFPN 11.0X9.0X1.05 32L | Tape And Reel | アクティブ | 3.125 | 1000 | EAR99 | PHILIPPINES | 在庫チェック | 購入 |
| ISO8200AQ | TFQFPN 11.0X9.0X1.05 32L | Tray | アクティブ | 3.125 | 1000 | EAR99 | PHILIPPINES | 在庫チェック |
ISO8200AQ
パッケージ
TFQFPN 11.0X9.0X1.05 32L梱包タイプ
TrayUnit Price (US$)
3.125*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
The first ST intelligent power switch with galvanic isolation on chip
開発環境
-
-
写真 品名 製造元 概要 
X-NUCLEO-OUT02A1 ST Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo 製品型番Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo
-
ソフトウェア製品
-
-
写真 品名 製造元 概要 
STSW-IFAPGUI -- Graphical user interface for the industrial IPS and IO-Link transceiver evaluation boards based on STM32 Nucleo 製品型番Graphical user interface for the industrial IPS and IO-Link transceiver evaluation boards based on STM32 Nucleo
-
-
-
写真 品名 製造元 概要 
X-CUBE-OUT2 ST Industrial digital output software expansion for STM32Cube 製品型番Industrial digital output software expansion for STM32Cube
-
| 製品型番 | 製品ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | Material Declaration** |
|---|---|---|---|---|---|
| ISO8200AQ | アクティブ | TFQFPN 11.0X9.0X1.05 32L | インダストリアル | Ecopack2 | |
| ISO8200AQTR | アクティブ | TFQFPN 11.0X9.0X1.05 32L | インダストリアル | Ecopack2 | |
ISO8200AQ
Package:
TFQFPN 11.0X9.0X1.05 32LMaterial Declaration**:
ISO8200AQTR
Package:
TFQFPN 11.0X9.0X1.05 32LMaterial Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
