-
This 32-bit system-on-chip (SoC) automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications—specifically, electrical hydraulic power steering (EHPS) and electric power steering (EPS)—as well as airbag applications.
主な特徴
- 64 MHz, single issue, 32-bit CPU core complex (e200z0h)
- Compliant with Power Architecture®embedded category
- Variable Length Encoding (VLE)
- Memory organization
- Up to 512 KB on-chip code flash memory with ECC and erase/program controller
- Additional 64 (4 × 16) KB on-chip data flash memory with ECC for EEPROM emulation
- Up to 40 KB on-chip SRAM with ECC
- Fail safe protection
- Programmable watchdog timer
- Non-maskable interrupt
- Fault collection unit
- Nexus L2+ interface
- Interrupts
- 16-channel eDMA controller
- 16 priority level controller
- General purpose I/Os individually programmable as input, output or special function
- 2 general purpose eTimer units
- 6 timers each with up/down count capabilities
- 16-bit resolution, cascadable counters
- Quadrature decode with rotation direction flag
- Double buffer input capture and output compare
- Communications interfaces
- 2 LINFlex channels (LIN 2.1)
- 4 DSPI channels with automatic chip select generation
- 1 FlexCAN interface (2.0B Active) with 32 message objects
- 1 safety port based on FlexCAN with 32 message objects and up to 7.5 Mbit/s capability; usable as second CAN when not used as safety port
- 1 FlexRay™ module (V2.1) with selectable dual or single channel support, 32 message objects and up to 10 Mbit/s (512 KB device only)
- Two 10-bit analog-to-digital converters (ADC)
- 2 × 11 input channels, + 4 shared channels
- Conversion time < 1 μs including sampling time at full precision
- Programmable ADC Cross Triggering Unit (CTU)
- 4 analog watchdogs with interrupt capability
- On-chip CAN/UART bootstrap loader with Boot Assist Module (BAM)
- 1 FlexPWM unit: 8 complementary or independent outputs with ADC synchronization signals
- 64 MHz, single issue, 32-bit CPU core complex (e200z0h)
ダウンロード
サンプル & 購入
| 製品型番 | 製品ステータス | 梱包タイプ | CPU Clock Frequency (MHz) (max) | Flash Size (kB) (Data) | Features set | 温度（℃） | 概算価格（USS） | 数量 | ECCN (US) | Country of Origin | 詳細 | 販売代理店からオーダー | STからオーダー | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小値 | max | |||||||||||||
| SPC560P44L3CEFAR |
Active
|
Tape And Reel | 64 | 64 | - | -40 | 125 | 4.0 | 1000 | 3A991A2 | MALTA | 在庫チェック | Buy now | |
| SPC560P44L3BEAAY |
Active
|
Tray | 64 | 64 | - | -40 | 105 | 3.7 | 1000 | 3A991A2 | MALTA | 在庫チェック | Buy now | |
| SPC560P44L3CEABY |
Active
|
Tray | 64 | 64 | - | -40 | 125 | 3.8 | 1000 | 3A991A2 | MALTA | No availability of distributors reported, please contact our sales office | ||
| SPC560P44L3BEAAR |
Active
|
Tape And Reel | 64 | 64 | - | -40 | 105 | 3.7 | 1000 | 3A991A2 | MALTA | No availability of distributors reported, please contact our sales office | ||
| SPC560P44L3CEFAY |
Active
|
Tray | 64 | 64 | - | -40 | 125 | 4 | 1000 | 3A991A2 | MALTA | No availability of distributors reported, please contact our sales office | ||
| SPC560P44L3CEABR |
Active
|
Tape And Reel | 64 | 64 | - | -40 | 125 | 3.8 | 1000 | 3A991A2 | MALTA | No availability of distributors reported, please contact our sales office | ||
SPC560P44L3CEABY
製品ステータス
アクティブ梱包タイプ
TrayUnit Price (US$)
3.8*SPC560P44L3BEAAR
製品ステータス
アクティブ梱包タイプ
Tape And ReelUnit Price (US$)
3.7*SPC560P44L3CEFAY
製品ステータス
アクティブ梱包タイプ
TrayUnit Price (US$)
4.0*SPC560P44L3CEABR
製品ステータス
アクティブ梱包タイプ
Tape And ReelUnit Price (US$)
3.8*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
First Automotive MCUs introducing Phase Change Memory (PCM)
Design Tools
-
-
写真 製品型番 製造元 概要 SEL-SPC5 -- Smart Selector for Micro 32bit Power Architecture products 製品型番Smart Selector for Micro 32bit Power Architecture products
-
開発ツール･ハードウェア
-
-
写真 製品型番 製造元 概要 CYCLONE P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. CYCLONE FX P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. DCI-GSI2 dSPACE dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming. Multilink Universal P&E Microcomputer Systems Debug Probe for ARM and other devices. Multilink Universal FX for SPC5 P&E Microcomputer Systems High-Speed Debug Probe for ARM and other devices. PowerDebug JTAG Debugger Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. 
SPC5-CONNECT ST Programmable interface for PC communication to automotive target systems. 
SPC5-UDESTK ST USB/JTAG debugger for SPC5 MCUs with software license included (by PLS) TRACE32 PowerTools Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. UDE/UAD2next for SPC5 PLS UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD2pro for SPC5 PLS UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD3+ for SPC5 PLS UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. XETK calibration interface ETAS The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface. iC5000 On-chip Analyzer iSYSTEM iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing. iC5700 On-chip Analyzer iSYSTEM iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development. iC6000 On-chip Analyzer with Aurora protocol support iSYSTEM iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface. 製品型番Automated, Stand-Alone Production Programmer, Debug & Test.
Automated, Stand-Alone Production Programmer, Debug & Test.
dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.
Debug Probe for ARM and other devices.
High-Speed Debug Probe for ARM and other devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Programmable interface for PC communication to automotive target systems.
USB/JTAG debugger for SPC5 MCUs with software license included (by PLS)
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface.
iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing.
iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development.
iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface.
-
-
-
写真 製品型番 製造元 概要 ASH/ETEC Ash Ware ETEC C Compiler Toolkit ASH/ETPU Ash Ware ETPU/ETPU2 Development Kit Arctic Studio - Development Tools ARCCORE AUTOSAR and embedded SW configuration. BYTE/eTPU Byte Craft eTPU_C Code Development System Diab Compiler Wind River The Proven Development Tool for Automotive Safety. EB tresos Studio - Development Tools Elektrobit AUTOSAR and embedded SW configuration. ECU Interface Software dSPACE dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing. ICDPPCNEXUS P&E Microcomputer Systems In-circuit debug software for SPC5 and similar devices. MULTI Integrated Development Environment Green Hills Software MULTI Integrated Development Environment MULTISPC56 Green Hills Software MULTI IDE PROGPPCNEXUS P&E Microcomputer Systems Flash programming software for SPC5 and similar devices. PowerView Debugger IDE Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. SPC5-STUDIO ST Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs SPC5-UDEDEBG ST PLS JTAG debugger software full license or license renewal TargetLink dSPACE The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®. UNITPPCNEXUS P&E Microcomputer Systems Interface library for SPC5-compatible PEmicro interfaces. WIND-WORKBENCH Wind River Wind River Workbench WinIDEASPC56 iSYSTEM winIDEA IDE isystem.connect iSYSTEM Automate your testing or other embedded debugging activitites with iSYSTEM's SDK. testIDEA iSYSTEM iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers. winIDEA Open iSYSTEM iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers. 製品型番ETEC C Compiler Toolkit
ETPU/ETPU2 Development Kit
AUTOSAR and embedded SW configuration.
eTPU_C Code Development System
The Proven Development Tool for Automotive Safety.
AUTOSAR and embedded SW configuration.
dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing.
In-circuit debug software for SPC5 and similar devices.
MULTI Integrated Development Environment
MULTI IDE
Flash programming software for SPC5 and similar devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs
PLS JTAG debugger software full license or license renewal
The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®.
Interface library for SPC5-compatible PEmicro interfaces.
Wind River Workbench
winIDEA IDE
Automate your testing or other embedded debugging activitites with iSYSTEM's SDK.
iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers.
iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers.
-
ソフトウェア製品
-
-
写真 製品型番 製造元 概要 CycurHSM ESCRYPT Powerful security software for your ECU. EB tresos Autocore SW Elektrobit AUTOSAR BSW components to be integrated with ST MCAL. K-SAR - AUTOSAR SUITE KPIT AUTOSAR and embedded SW configuration. ORIENTAIS - AUTOSAR SUITE ISOFT Infrastructure Software AUTOSAR and embedded SW configuration. RTA Solution ETAS AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU SPC5-CRYP-LIB -- Software Cryptography Library for SPC5 MCUs SPC5-MCTK-LIB ST SPC5 Motor Control Tool Kit FOC Library SPC56xMBP-FLASH ST Flash drivers for SPC56 M, B, C, D and P lines STSW-SPC56002FW ST LIN Drivers Libraries for SPC56 Microcontrollers STSW-SPC56AS003 ST SPC56 P Line MCAL for Autosar 4.0 製品型番Powerful security software for your ECU.
AUTOSAR BSW components to be integrated with ST MCAL.
AUTOSAR and embedded SW configuration.
AUTOSAR and embedded SW configuration.
AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU
Software Cryptography Library for SPC5 MCUs
SPC5 Motor Control Tool Kit FOC Library
Flash drivers for SPC56 M, B, C, D and P lines
LIN Drivers Libraries for SPC56 Microcontrollers
SPC56 P Line MCAL for Autosar 4.0
-
評価ツール
-
-
写真 製品型番 製造元 概要 SPC560PADPT100S ST Daughter/adapter board for SPC560 series 512KB/1MB devices in QFP100 package 
SPC56P-Discovery ST Discovery Kit for SPC56 P line - with SPC560P50L5 MCU 製品型番Daughter/adapter board for SPC560 series 512KB/1MB devices in QFP100 package
Discovery Kit for SPC56 P line - with SPC560P50L5 MCU
-
Support and Applications
-
-
写真 製品型番 製造元 概要 Design consultancy + Training Intecs Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment. 製品型番Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment.
-
-
-
写真 製品型番 製造元 概要 SPC56XX 32-Bit Single-Core Power Architecture Training MicroConsult Technical training and consulting for SPC560/SPC570/SPC580 製品型番Technical training and consulting for SPC560/SPC570/SPC580
-
| 製品型番 | 製品ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| SPC560P44L3BEAAR |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 | |
| SPC560P44L3BEAAY |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 | |
| SPC560P44L3CEABR |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 | |
| SPC560P44L3CEABY |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 | |
| SPC560P44L3CEFAR |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 | |
| SPC560P44L3CEFAY |
Active
|
LQFP 100 14x14x1.4 | オートモーティブ | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
