TSC102

量産中
Design Win Education
MySTに保存する

High side current sense amplifier plus signal conditioning amplifier

Download datasheet
Order Direct

製品概要

概要

The TSC102 measures a small differential voltage on a high-side shunt resistor and translates it into a ground-referenced output voltage.

The device’s wide input common-mode voltage range, low quiescent current and tiny TSSOP8 packaging enable use in a wide variety of applications (also available in SO8 package).

The input common-mode and power supply voltages are independent. The common-mode voltage can range from 2.8 to 30 V in operating conditions.

The TSC102 is rugged against abnormal conditions on the input pins: Vp and Vm can withstand up to 60 V in case of voltage spikes, as little as -16 V in case of reversed battery, and up to 4 kV in case of electrostatic discharge.

In addition to the current sensing amplifier, the TSC102 offers a fully accessible amplifier for output signal conditioning. The device’s overall current consumption is lower than 420 μA.

  • 特徴

    • Independent supply and input common-mode voltages
    • Wide common-mode operating range: 2.8 to 30 V
    • Wide common-mode surviving range: -16 to 60 V (reversed battery and load-dump conditions)
    • Low current consumption: ICC max = 420 μA
    • Output amplifier for tailor-made signal conditioning
    • -40 °C to 125 °C operating temperature range
    • 4 kV ESD protection
    続きを読む 一部を表示

回路ダイアグラム

ダウンロード

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太陽光発電システム
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

おすすめ製品

STSW-eDSim

eDSim: fast and powerful electrical simulation software for SMPS and analog ICs

STEVAL-ISQ010V1

High-side current-sense amplifier demonstration board based on the TSC102

推奨コンテンツ

EDAシンボル / フットプリント / 3Dモデル

STマイクロエレクトロニクス - TSC102

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

EDAシンボル

Footprints

フットプリント

3D model

3Dモデル

すべてのリソース

すべてのカテゴリを表示
タイトル
バージョン
更新日

SPICE models (1)

タイトル
バージョン
更新日
TSC102 macromodel Pspice (new Pin Order)
2.0 03 Nov 2020
03 Nov 2020
TSC102 macromodel Pspice (new Pin Order) 2.0

Eldo models (1)

タイトル
バージョン
更新日
TSC102 macromodel ELDO New Pins Order
2.0 03 Nov 2020
03 Nov 2020
TSC102 macromodel ELDO New Pins Order 2.0

SIMetrix models (1)

タイトル
バージョン
更新日
TSC102 SIMetrix examples schematics
2023.12 16 Apr 2024
16 Apr 2024
TSC102 SIMetrix examples schematics 2023.12

品質 & 信頼性

製品型番 マーケティング･ステータス パッケージ グレード RoHSコンプライアンスグレード Longevity Commitment Longevity Starting Date 材料宣誓書**
TSC102IDT
量産中
SO-8 インダストリアル Ecopack3 10 2024-06-07T00:00:00.000+02:00
TSC102IPT
量産中
TSSOP-8L インダストリアル Ecopack3 10 2024-06-07T00:00:00.000+02:00
TSC102IYDT
量産中
SO-8 オートモーティブ Ecopack3 10 2024-06-07T00:00:00.000+02:00
TSC102IYPT
量産中
TSSOP-8L オートモーティブ Ecopack3 10 2024-06-07T00:00:00.000+02:00

TSC102IDT

Package:

SO-8

Material Declaration**:

More Info

Marketing Status

量産中

Package

SO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack3

TSC102IPT

Package:

TSSOP-8L

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

TSSOP-8L

Grade

Industrial

RoHS Compliance Grade

Ecopack3

TSC102IYDT

Package:

SO-8

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

SO-8

Grade

Automotive

RoHS Compliance Grade

Ecopack3

TSC102IYPT

Package:

TSSOP-8L

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

TSSOP-8L

Grade

Automotive

RoHS Compliance Grade

Ecopack3

(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。

製品

検索履歴

ブックマーク

Please log in  to show your saved searches.

▼
戻る
戻る
戻る

ご存知でしたか？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

STによるお客様のプロファイル情報の処理方法、またお客様がご自身の個人情報の保護に関する権利を行使する方法については、当社の プライバシー･ステートメント をご確認ください。

以下の製品のお知らせを受け取れます
- TSC102

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.