-
The SPC582Bxx microcontroller is the entry member of a new family of devices superseding the SPC582Bx family.
SPC582Bxx is built on the legacy of the SPC5x products, while introducing new features to answer the future requirements like the ASIL-B classification, high number of ISO CAN-FD channels, and provide significant power and performance improvement (MIPS per mW).
主な特徴
- AEC-Q100 qualified
- High performance e200z2 single core
- 32-bit Power Architecture technology CPU
- Core frequency as high as 80 MHz
- Variable Length Encoding (VLE)
- Floating Point, End-to-End Error Correction
- 1088 KB (1024 KB code flash + 64 KB data flash) on-chip flash memory: supports read during program and erase operations, and multiple blocks allowing EEPROM emulation
- 96 KB on-chip general-purpose SRAM
- Multi-channel direct memory access controller (eDMA) with 16 channels
- 1 interrupt controller (INTC)
- Comprehensive new generation ASIL-B safety concept
- ASIL-B of ISO 26262
- FCCU for collection and reaction to failure notifications
- Memory Error Management Unit (MEMU) for collection and reporting of error events in memories
- Cyclic redundancy check (CRC) unit
- End-to-end Error Correction Code (e2eECC) logic
- Crossbar switch architecture for concurrent access to peripherals, Flash, or RAM from multiple bus masters with end-to-end ECC
- Body cross triggering unit (BCTU)
- Triggers ADC conversions from any eMIOS channel
- Triggers ADC conversions from up to 2 dedicated PIT_RTIs
- 1 event configuration register dedicated to each timer event allows to define the corresponding ADC channel
- Synchronization with ADC to avoid collision
- 1 enhanced 12-bit SAR analog-to-digital converters
- Up to 27 channels
- enhanced diagnosis feature
- Communication interfaces
- 6 LINFlexD modules
- 4 deserial serial peripheral interface (DSPI) modules
- 7 MCAN interfaces with advanced shared memory scheme and ISO CAN FD support
- Dual phase-locked loops with stable clock domain for peripherals and FM modulation domain for computational shell
- Nexus Class 3 debug and trace interface
- Boot assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART.
- Enhanced modular IO subsystem (eMIOS): up to 32 timed I/O channels with 16-bit counter resolution
- Advanced and flexible supply scheme
- On-chip voltage regulator for 1.2 V core logic supply.
- Junction temperature range -40 °C to 150 °C
サンプル & 購入
| 製品型番 | Marketing Status | Packing Type | CPU Clock Frequency (MHz) (max) | FLASH Size (kB) (Data) | Features set | Temperature (°C) | Budgetary Price (US$)* | 数量 | ECCN (US) | Country of Origin | More info | Order from Distributors | Order from ST | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小値 | max | |||||||||||||
| SPC582B54E1BD00X |
Active
|
Tape And Reel | 80 | 64 | - | -40 | 105 | 4.5 | 1000 | 3A991A2 | - | No availability of distributors reported, please contact our sales office | ||
| SPC582B54E1CD00X |
Active
|
Tape And Reel | 80 | 64 | - | - | - | 4.6 | 1000 | 3A991A2 | - | No availability of distributors reported, please contact our sales office | ||
| SPC582B54E1CG00X |
Active
|
Tape And Reel | 80 | 64 | - | -40 | 105 | 4.6 | 1000 | 3A991A2 | - | No availability of distributors reported, please contact our sales office | ||
| SPC582B54E1AD00X |
Active
|
Tape And Reel | 80 | 64 | - | - | - | 4.3 | 1000 | 3A991A2 | - | No availability of distributors reported, please contact our sales office | ||
SPC582B54E1BD00X
Marketing Status
アクティブPacking Type
Tape And ReelUnit Price (US$)
4.5*SPC582B54E1CD00X
Marketing Status
アクティブPacking Type
Tape And ReelUnit Price (US$)
4.6*SPC582B54E1CG00X
Marketing Status
アクティブPacking Type
Tape And ReelUnit Price (US$)
4.6*SPC582B54E1AD00X
Marketing Status
アクティブPacking Type
Tape And ReelUnit Price (US$)
4.3*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
Design Tools
-
-
写真 Part number 製造元 Description SEL-SPC5 -- Smart Selector for Micro 32bit Power Architecture products 製品型番Smart Selector for Micro 32bit Power Architecture products
-
開発ツール･ハードウェア
-
-
写真 Part number 製造元 Description CYCLONE P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. CYCLONE FX P&E Microcomputer Systems Automated, Stand-Alone Production Programmer, Debug & Test. DCI-GSI2 dSPACE dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming. Multilink Universal P&E Microcomputer Systems Debug Probe for ARM and other devices. Multilink Universal FX for SPC5 P&E Microcomputer Systems High-Speed Debug Probe for ARM and other devices. PowerDebug JTAG Debugger Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. 
SPC5-CONNECT ST Programmable interface for PC communication to automotive target systems. 
SPC5-UDESTK ST USB/JTAG debugger for SPC5 MCUs with software license included (by PLS) TRACE32 PowerTools Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. UDE/UAD2next for SPC5 PLS UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD2pro for SPC5 PLS UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. UDE/UAD3+ for SPC5 PLS UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families. XETK calibration interface ETAS The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface. iC5000 On-chip Analyzer iSYSTEM iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing. iC5700 On-chip Analyzer iSYSTEM iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development. iC6000 On-chip Analyzer with Aurora protocol support iSYSTEM iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface. 製品型番Automated, Stand-Alone Production Programmer, Debug & Test.
Automated, Stand-Alone Production Programmer, Debug & Test.
dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.
Debug Probe for ARM and other devices.
High-Speed Debug Probe for ARM and other devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Programmable interface for PC communication to automotive target systems.
USB/JTAG debugger for SPC5 MCUs with software license included (by PLS)
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.
The Ethernet-based ETK, FETK and XETK interfaces provide direct access to the control variables and parameters of an ECU via the parallel data and address bus, or via a serial microcontroller testing or debugging interface.
iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing.
iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development.
iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface.
-
-
-
写真 Part number 製造元 Description ASH/ETEC Ash Ware ETEC C Compiler Toolkit ASH/ETPU Ash Ware ETPU/ETPU2 Development Kit Arctic Studio - Development Tools ARCCORE AUTOSAR and embedded SW configuration. BYTE/eTPU Byte Craft eTPU_C Code Development System Diab Compiler Wind River The Proven Development Tool for Automotive Safety. EB tresos Studio - Development Tools Elektrobit AUTOSAR and embedded SW configuration. ECU Interface Software dSPACE dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing. ICDPPCNEXUS P&E Microcomputer Systems In-circuit debug software for SPC5 and similar devices. MULTI Integrated Development Environment Green Hills Software MULTI Integrated Development Environment MULTISPC56 Green Hills Software MULTI IDE PROGPPCNEXUS P&E Microcomputer Systems Flash programming software for SPC5 and similar devices. PowerView Debugger IDE Lauterbach Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc. SPC5-STUDIO ST Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs SPC5-UDEDEBG ST PLS JTAG debugger software full license or license renewal TargetLink dSPACE The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®. UNITPPCNEXUS P&E Microcomputer Systems Interface library for SPC5-compatible PEmicro interfaces. WIND-WORKBENCH Wind River Wind River Workbench WinIDEASPC56 iSYSTEM winIDEA IDE isystem.connect iSYSTEM Automate your testing or other embedded debugging activitites with iSYSTEM's SDK. testIDEA iSYSTEM iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers. winIDEA Open iSYSTEM iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers. 製品型番ETEC C Compiler Toolkit
ETPU/ETPU2 Development Kit
AUTOSAR and embedded SW configuration.
eTPU_C Code Development System
The Proven Development Tool for Automotive Safety.
AUTOSAR and embedded SW configuration.
dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing.
In-circuit debug software for SPC5 and similar devices.
MULTI Integrated Development Environment
MULTI IDE
Flash programming software for SPC5 and similar devices.
Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.
Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs
PLS JTAG debugger software full license or license renewal
The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®.
Interface library for SPC5-compatible PEmicro interfaces.
Wind River Workbench
winIDEA IDE
Automate your testing or other embedded debugging activitites with iSYSTEM's SDK.
iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers.
iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers.
-
ソフトウェア製品
-
-
写真 Part number 製造元 Description CycurHSM ESCRYPT Powerful security software for your ECU. EB tresos Autocore SW Elektrobit AUTOSAR BSW components to be integrated with ST MCAL. K-SAR - AUTOSAR SUITE KPIT AUTOSAR and embedded SW configuration. ORIENTAIS - AUTOSAR SUITE ISOFT Infrastructure Software AUTOSAR and embedded SW configuration. RTA Solution ETAS AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU SPC5-CRYP-LIB -- Software Cryptography Library for SPC5 MCUs SPC58XEC-FLASH ST Flash drivers for SPC58 B, C, D, E and G lines 製品型番Powerful security software for your ECU.
AUTOSAR BSW components to be integrated with ST MCAL.
AUTOSAR and embedded SW configuration.
AUTOSAR and embedded SW configuration.
AUTOSAR solutions for SPC5 32-bit Power Architecture Automotive MCU
Software Cryptography Library for SPC5 MCUs
Flash drivers for SPC58 B, C, D, E and G lines
-
評価ツール
-
-
写真 Part number 製造元 Description 
SPC582B-DIS ST Discovery Kit for SPC582 B line 製品型番Discovery Kit for SPC582 B line
-
Support and Applications
-
-
写真 Part number 製造元 Description Design consultancy + Training Intecs Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment. 製品型番Design consultancy and/or training on Automotive application with particular reference to AUTOSAR environment.
-
-
-
写真 Part number 製造元 Description SPC56XX 32-Bit Single-Core Power Architecture Training MicroConsult Technical training and consulting for SPC560/SPC570/SPC580 製品型番Technical training and consulting for SPC560/SPC570/SPC580
-
| 製品型番 | Marketing Status | パッケージ | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| SPC582B54E1AD00X |
Active
|
TQFP 64 10x10x1.0 | オートモーティブ | Ecopack2 | |
| SPC582B54E1BD00X |
Active
|
TQFP 64 10x10x1.0 | オートモーティブ | Ecopack2 | |
| SPC582B54E1CD00X |
Active
|
TQFP 64 10x10x1.0 | オートモーティブ | Ecopack2 | |
| SPC582B54E1CG00X |
Active
|
TQFP 64 10x10x1.0 | オートモーティブ | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
