概要
サンプル & 購入
ソリューション
リソース
ツール & ソフトウェア
品質 & 信頼性
eDesignSuite
はじめる
Partner products
Sales Briefcase
  • The SPC584Cx and SPC58ECx microcontroller is the first in a new family of devices superseding the SPC564Cx and SPC56ECx family. SPC584Cx and SPC58ECx builds on the legacy of the SPC564Cx and SPC56ECx family, while introducing new features coupled with higher throughput to provide substantial reduction of cost per feature and significant power and performance improvement (MIPS per mW). On the SPC584Cx and SPC58ECx device, there are two processor cores e200z420 and one e200z0 core embedded in the Hardware Security Module.

    主な特徴

    • AEC-Q100 qualified
    • High performance e200z420n3 dual core
      • 32-bit Power Architecture technology CPU
      • Core frequency as high as 180 MHz
      • Variable Length Encoding (VLE)
    • 4224 KB (4096 KB code flash + 128 KB data flash) on-chip flash memory: supports read during program and erase operations, and multiple blocks allowing EEPROM emulation
    • 176 KB HSM dedicated flash memory (144 KB code + 32 KB data)
    • 384 KB on-chip general-purpose SRAM (in addition to 128 KB core local data RAM: 64 KB included in each CPU)
    • Multi-channel direct memory access controller (eDMA) with 64 channels
    • 1 interrupt controller (INTC)
    • Comprehensive new generation ASIL-B safety concept
      • ASIL-B of ISO 26262
      • FCCU for collection and reaction to failure notifications
      • Memory Error Management Unit (MEMU) for collection and reporting of error events in memories
      • Cyclic redundancy check (CRC) unit
    • Crossbar switch architecture for concurrent access to peripherals, Flash, or RAM from multiple bus masters with end-to-end ECC
    • Body cross triggering unit (BCTU)
      • Triggers ADC conversions from any eMIOS channel
      • Triggers ADC conversions from up to 2 dedicated PIT_RTIs
    • Enhanced modular IO subsystem (eMIOS): up to 64 timed I/O channels with 16-bit counter resolution
    • Enhanced analog-to-digital converter system with:
      • 3 independent fast 12-bit SAR analog converters
      • 1 supervisor 12-bit SAR analog converter
      • 1 10-bit SAR analog converter with STDBY mode support
    • Communication interfaces
      • 18 LINFlexD modules
      • 8 deserial serial peripheral interface (DSPI) modules
      • 8 MCAN interfaces with advanced shared memory scheme and ISO CAN-FD support
      • Dual-channel FlexRay controller
      • 1 ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008
    • Low power capabilities
      • Versatile low power modes
      • Ultra low power standby with RTC
      • Smart Wake-up Unit for contact monitoring
      • Fast wakeup schemes
    • Dual phase-locked loops with stable clock domain for peripherals and FM modulation domain for computational shell
    • Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with some support for 2010 standard
    • Boot assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART
    • Junction temperature range -40 °C to 150 °C

推奨コンテンツ

Design Tools

    • 製品型番

      Smart Selector for Micro 32bit Power Architecture products

開発ツール・ハードウェア

    • 製品型番

      Automated, Stand-Alone Production Programmer, Debug & Test.

      Automated, Stand-Alone Production Programmer, Debug & Test.

      dSPACE DCI-GSI2 is a low latency and high bandwidth on-chip debug interface for bypassing, calibration, measurement and flash programming.

      Debug Probe for ARM and other devices.

      High-Speed Debug Probe for ARM and other devices.

      Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.

      Programmable interface for PC communication to automotive target systems.

      USB/JTAG debugger for SPC5 MCUs with software license included (by PLS)

      Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.

      UDE/UAD2next for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.

      UDE/UAD2pro for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.

      UDE/UAD3+ for SPC5 is a powerful and flexible debug, test and trace platform supporting multi-core microcontrollers of SPC57x/58x Power Architecture® device families.

      iC5000 belongs to iSYSTEM's premium embedded development tool family for single and multi-core development and testing.

      iC5700 is iSYSTEM's premium embedded development tool for complex single and multi-core development.

      iC6000 is iSYSTEM's premium embedded development solution supporting microcontrollers featuring the Aurora physical interface.

    • 製品型番

      ETEC C Compiler Toolkit

      ETPU/ETPU2 Development Kit

      AUTOSAR and embedded SW configuration.

      eTPU_C Code Development System

      The Proven Development Tool for Automotive Safety.

      AUTOSAR and embedded SW configuration.

      dSPACE ECU Interface Software prepares ECUs, RCP Hardware and HIL Simulators for ECU Interfacing like bypassing, calibration, measurement and testing.

      In-circuit debug software for SPC5 and similar devices.

      MULTI Integrated Development Environment

      MULTI IDE

      Flash programming software for SPC5 and similar devices.

      Our product line TRACE32® supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers, software and hardware trace and logic analyzer systems for over 3500 cores and CPUs within 250 families like ARM® Cortex®-A/-M/-R, PowerArchitecture, etc.

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      PLS JTAG debugger software full license or license renewal

      The production code generator dSPACE TargetLink generates highly efficient C code straight from MATLAB®/Simulink®/Stateflow®.

      Interface library for SPC5-compatible PEmicro interfaces.

      Wind River Workbench

      winIDEA IDE

      Automate your testing or other embedded debugging activitites with iSYSTEM's SDK.

      iSYSTEM's testing tools supporting original binary code testing on target together with their BlueBox™ On-Chip Analysers and iTAG Debuggers.

      iSYSTEM's integrated development environment (IDE) supporting its range of iTAG Debuggers for Cortex-M microcontrollers.

ソフトウェア製品

評価ツール

    • 製品型番

      Discovery Kit for SPC58EC - C line

サポート & アプリケーション

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      DB3707
      32-bit Power Architecture®microcontroller for automotive ASIL-B applications
      2.0
      98.96 KB
      PDF
      DS11620
      SPC58 C Line - 32 bit Power Architecture automotive MCU Dual z4 cores 180 MHz, 4 MBytes Flash, HSM, ASIL-B
      6.0
      3.02 MB
      PDF
      DB3707

      32-bit Power Architecture®microcontroller for automotive ASIL-B applications

      DS11620

      SPC58 C Line - 32 bit Power Architecture automotive MCU Dual z4 cores 180 MHz, 4 MBytes Flash, HSM, ASIL-B

    • 概要 バージョン サイズ アクション
      AN5173
      Notes on EDC after ECC functionality
      1.0
      154.73 KB
      PDF
      AN5013
      SPC584Cx/SPC58ECx FCCU fault sources and reaction
      1.0
      928.63 KB
      PDF
      AN5416
      SPC58EC CAN bus configuration
      1.0
      7.79 MB
      PDF
      AN5484
      SPC58x - Configurable PAD - Keeper feature
      1.0
      265.89 KB
      PDF
      AN5011
      SPC58xCx/SPC58xG8x Getting Started
      2.0
      560.83 KB
      PDF
      AN5171
      Windriver support on SPC5Studio
      1.0
      1.26 MB
      PDF
      AN5173

      Notes on EDC after ECC functionality

      AN5013

      SPC584Cx/SPC58ECx FCCU fault sources and reaction

      AN5416

      SPC58EC CAN bus configuration

      AN5484

      SPC58x - Configurable PAD - Keeper feature

      AN5011

      SPC58xCx/SPC58xG8x Getting Started

      AN5171

      Windriver support on SPC5Studio

    • 概要 バージョン サイズ アクション
      TN1287
      FCCU setup to allow reset from SWT2
      1.0
      176.61 KB
      PDF
      TN1239
      How to change DCF STCU configuration
      2.0
      301.21 KB
      PDF
      TN1296
      I2S emulation on DSPI
      1.0
      380.75 KB
      PDF
      TN1284
      SPC56EL54/SPC564L54 memory map
      1.0
      129.48 KB
      PDF
      TN1283
      SPC56EL64/SPC564L64 memory map
      1.0
      136.62 KB
      PDF
      TN1289
      SPC58 line - How to use the Memory Protection Layers
      1.1
      1.28 MB
      PDF
      TN1260
      SPC584Cx, SPC58ECx IO definition: signal description and input multiplexing tables
      3.0
      1.24 MB
      PDF
      TN1271
      SPC58xB/C/G Low Power Modes
      2.0
      1.08 MB
      PDF
      TN1297
      Self-test configuration for SPC58ECx device
      1.0
      199.3 KB
      PDF
      TN1287

      FCCU setup to allow reset from SWT2

      TN1239

      How to change DCF STCU configuration

      TN1296

      I2S emulation on DSPI

      TN1284

      SPC56EL54/SPC564L54 memory map

      TN1283

      SPC56EL64/SPC564L64 memory map

      TN1289

      SPC58 line - How to use the Memory Protection Layers

      TN1260

      SPC584Cx, SPC58ECx IO definition: signal description and input multiplexing tables

      TN1271

      SPC58xB/C/G Low Power Modes

      TN1297

      Self-test configuration for SPC58ECx device

    • 概要 バージョン サイズ アクション
      UM2661
      SPC58XXADPT100S
      1.1
      1.01 MB
      PDF
      UM2636
      Standard Software Driver for C55 Flash module embedded on SPC58 B, C, E, H, G and N lines microcontroller
      1.0
      478.9 KB
      PDF
      UM1627
      Standard software driver for C90LC Flash
      2.3
      949.39 KB
      PDF
      UM0438
      Variable-Length Encoding (VLE) extension -programming interface manual
      1.3
      421.14 KB
      PDF
      UM2661

      SPC58XXADPT100S

      UM2636

      Standard Software Driver for C55 Flash module embedded on SPC58 B, C, E, H, G and N lines microcontroller

      UM1627

      Standard software driver for C90LC Flash

      UM0438

      Variable-Length Encoding (VLE) extension -programming interface manual

    • 概要 バージョン サイズ アクション
      RM0004
      Programmer's reference manual for Book E processors
      2.0
      24.4 MB
      PDF
      RM0004

      Programmer's reference manual for Book E processors

    • 概要 バージョン サイズ アクション
      AN5173
      Notes on EDC after ECC functionality
      1.0
      154.73 KB
      PDF
      AN5171
      Windriver support on SPC5Studio
      1.0
      1.26 MB
      PDF
      AN5173

      Notes on EDC after ECC functionality

      AN5171

      Windriver support on SPC5Studio

Presentations & Training Material

    • 概要 バージョン サイズ アクション
      SPC5 32-bit microcontroller Series featuring Power Architecture
      2.68 MB
      PDF
      SPC5 Family Overview October 2015
      2.49 MB
      PDF

      SPC5 32-bit microcontroller Series featuring Power Architecture

      SPC5 Family Overview October 2015

関連資料

    • 概要 バージョン サイズ アクション
      SPC58 B/C/G-lines - Automotive MCUs for car body & security 1.0
      749.41 KB
      PDF

      SPC58 B/C/G-lines - Automotive MCUs for car body & security

    • 概要 バージョン サイズ アクション
      Driving Electromobility 1.0
      1.57 MB
      PDF

      Driving Electromobility

品質 & 信頼性

製品型番 Marketing Status パッケージ グレード RoHSコンプライアンスグレード 材料宣誓書**
SPC584C70E3F000X
量産中
TQFP 100 14x14x1.0 オートモーティブ Ecopack2
SPC584C70E3FMC0X
量産中
TQFP 100 14x14x1.0 オートモーティブ Ecopack2
SPC584C70E3GMC0X
量産中
TQFP 100 14x14x1.0 オートモーティブ Ecopack2

SPC584C70E3F000X

Package:

TQFP 100 14x14x1.0

Material Declaration**:

PDF XML

Marketing Status

量産中

Package

TQFP 100 14x14x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

SPC584C70E3FMC0X

Package:

TQFP 100 14x14x1.0

Material Declaration**:

PDF XML

Marketing Status

量産中

Package

TQFP 100 14x14x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

SPC584C70E3GMC0X

Package:

TQFP 100 14x14x1.0

Material Declaration**:

PDF XML

Marketing Status

量産中

Package

TQFP 100 14x14x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

製品型番
販売代理店からオーダー
STからオーダー
製品ステータス
梱包タイプ
CPU Clock Frequency (MHz) (max)
Flash Size (kB) (Data)
Features set
温度(℃) Budgetary Price (US$)*/Qty
詳細情報
最小
最大
SPC584C70E3F000X

販売代理店に在庫がない場合は、STのセールスオフィスまでお問い合わせください

量産中
Tape And Reel 180 128 - - - 9.8 / 1k
詳細情報

ECCN (US):

5A991B4A

Country of Origin:

MALTA

SPC584C70E3FMC0X

販売代理店に在庫がない場合は、STのセールスオフィスまでお問い合わせください

量産中
Tape And Reel 180 128 - - - 11.0 / 1k
詳細情報

ECCN (US):

5A991B4A

Country of Origin:

MALTA

SPC584C70E3GMC0X

販売代理店に在庫がない場合は、STのセールスオフィスまでお問い合わせください

量産中
Tape And Reel 180 128 - - -
詳細情報

ECCN (US):

5A991B4A

Country of Origin:

MALTA

SPC584C70E3F000X

製品ステータス

量産中

梱包タイプ

Tape And Reel

Budgetary Price (US$)*/Qty

9.8 / 1k

CPU Clock Frequency (MHz) (max)

180

Flash Size (kB) (Data)

128

Features set

-

Operating Temperature (°C)

(最小)

-

(最大)

-

Budgetary Price (US$)* / Qty

9.8 / 1k

ECCN (US)

5A991B4A

Country of Origin

MALTA

SPC584C70E3FMC0X

製品ステータス

量産中

梱包タイプ

Tape And Reel

Budgetary Price (US$)*/Qty

11.0 / 1k

CPU Clock Frequency (MHz) (max)

180

Flash Size (kB) (Data)

128

Features set

-

Operating Temperature (°C)

(最小)

-

(最大)

-

Budgetary Price (US$)* / Qty

11.0 / 1k

ECCN (US)

5A991B4A

Country of Origin

MALTA

SPC584C70E3GMC0X

製品ステータス

量産中

梱包タイプ

Tape And Reel

Budgetary Price (US$)*/Qty

CPU Clock Frequency (MHz) (max)

180

Flash Size (kB) (Data)

128

Features set

-

Operating Temperature (°C)

(最小)

-

(最大)

-

Budgetary Price (US$)* / Qty

ECCN (US)

5A991B4A

Country of Origin

MALTA

(*)概算用の希望小売単価(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。