概要
ツール & ソフトウェア
リソース
ソリューション
品質 & 信頼性
Sales Briefcase
eDesignSuite
Get Started
サンプル & 購入
Partner products
  • The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut-off current delay time, and restart delay are programmable. Cut-off current and cut-off current delay time, combined with thermal shutdown and automatic restart, protect the device against overload and short-circuit. C/QO and L+ output stages are able to drive resistive, inductive and capacitive loads. Inductive loads up to 10 mJ can be driven. Supply voltage is monitored and low voltage conditions are detected. The L6360 transfers, through the PHY2(C/QO pin), data received from a host microcontroller through the USART (IN C/QO pin), or to the USART (OUT C/QI pin) data received from PHY2 (C/QI pin). To enable full IC control, configuration and monitoring (i.e. fault conditions stored in the status register), the communication between the system microcontroller and the L6360 is based on a fast mode 2-wire I2C. The L6360 has nine registers to manage the programmable parameters and the status of the IC. Monitored fault conditions are: L+ line, overtemperature, C/Q overload, linear regulator undervoltage, and parity check. Internal LED driver circuitries, in open drain configuration, provide two programmable sequences to drive two LEDs.

    主な特徴

    • Supply voltage from 18 V to 32.5 V
    • Programmable output stages: high-side, low-side or push-pull (< 2 Ω)
    • Up to 500 mA L+ protected high-side driver
    • COM1, COM2 and COM3 mode supported
    • Additional IEC61131-2 type 1 input
    • Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
    • 3.3 V / 5 V, 50 mA linear regulator
    • 5 mA IO-Link digital input
    • Fast mode I2C for IC control, configuration and diagnostic
    • Diagnostic dual LED sequence generator and driver
    • 5 V and 3.3 V compatible I/Os
    • Overvoltage protection (> 36 V)
    • Overtemperature protection
    • ESD protection
    • Miniaturized VFQFPN 26L (3.5x5x1 mm) package

回路ダイアグラム

ダウンロード ダウンロード

サンプル & 購入

製品型番
パッケージ
梱包タイプ
製品ステータス
概算価格(USS)
数量
ECCN (US)
Country of Origin
販売代理店からオーダー
STからオーダー
L6360 VFDFPN 26 3.5x5 Tray
Active
2.791 10000 EAR99 ITALY 在庫チェック

Distributor availability ofL6360

代理店名
地域 在庫 最小発注 Third party link
ARROW EUROPE 740 0 Order Now

代理店レポートによる在庫データ: 2019-07-19

代理店名

ARROW

在庫

740

Min.Order

0

地域

EUROPE Order Now

代理店レポートによる在庫データ: 2019-07-19

L6360TR VFDFPN 26 3.5x5 Tape And Reel
Active
2.791 10000 EAR99 ITALY 在庫チェック

Distributor availability ofL6360TR

代理店名
地域 在庫 最小発注 Third party link
DIGIKEY WORLDWIDE 4080 1 Order Now
AVNET AMERICA 3000 0 Order Now
ARROW EUROPE 9000 0 Order Now
MOUSER WORLDWIDE 2909 1 Order Now
Farnell Element14 EUROPE 2893 1 Order Now

代理店レポートによる在庫データ: 2019-07-19

代理店名

DIGIKEY

在庫

4080

Min.Order

1

地域

WORLDWIDE Order Now

AVNET

在庫

3000

Min.Order

0

地域

AMERICA Order Now

ARROW

在庫

9000

Min.Order

0

地域

EUROPE Order Now

MOUSER

在庫

2909

Min.Order

1

地域

WORLDWIDE Order Now

Farnell Element14

在庫

2893

Min.Order

1

地域

EUROPE Order Now

代理店レポートによる在庫データ: 2019-07-19

Get sample

L6360

パッケージ

VFDFPN 26 3.5x5

梱包タイプ

Tray

Unit Price (US$)

2.791*

Distributor availability ofL6360

代理店名
地域 在庫 最小発注 Third party link
ARROW EUROPE 740 0 Order Now

代理店レポートによる在庫データ: 2019-07-19

代理店名

ARROW

在庫

740

Min.Order

0

地域

EUROPE Order Now

代理店レポートによる在庫データ: 2019-07-19

製品ステータス

Active

Unit Price (US$)

2.791

数量

10000

ECCN (US)

EAR99

Country of Origin

ITALY

L6360TR

パッケージ

VFDFPN 26 3.5x5

梱包タイプ

Tape And Reel

Unit Price (US$)

2.791*

Distributor availability ofL6360TR

代理店名
地域 在庫 最小発注 Third party link
DIGIKEY WORLDWIDE 4080 1 Order Now
AVNET AMERICA 3000 0 Order Now
ARROW EUROPE 9000 0 Order Now
MOUSER WORLDWIDE 2909 1 Order Now
Farnell Element14 EUROPE 2893 1 Order Now

代理店レポートによる在庫データ: 2019-07-19

代理店名

DIGIKEY

在庫

4080

Min.Order

1

地域

WORLDWIDE Order Now

AVNET

在庫

3000

Min.Order

0

地域

AMERICA Order Now

ARROW

在庫

9000

Min.Order

0

地域

EUROPE Order Now

MOUSER

在庫

2909

Min.Order

1

地域

WORLDWIDE Order Now

Farnell Element14

在庫

2893

Min.Order

1

地域

EUROPE Order Now

代理店レポートによる在庫データ: 2019-07-19

製品ステータス

Active

Unit Price (US$)

2.791

数量

10000

ECCN (US)

EAR99

Country of Origin

ITALY

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Recommended for you

関連アプリケーション

ファクトリ・オートメーション

Connectivity

開発ツール・ハードウェア

開発環境

    • 製品型番

      STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack

評価ツール

    • 製品型番

      IO-Link master multi-port evaluation board based on L6360

      IO-Link communication master transceiver demonstration board based on the L6360

      IO-Link master evaluation board based on L6360 equipped with ST morpho connectors for STM32 Nucleo

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      DS8900
      IO-Link communication master transceiver IC
      6.0
      2.66 MB
      PDF
      DS8900

      IO-Link communication master transceiver IC

    • 概要 バージョン サイズ アクション
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

    • 概要 バージョン サイズ アクション
      AN5041
      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit
      3.0
      1.96 MB
      PDF
      AN4075
      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board
      1.0
      409.41 KB
      PDF
      AN5041

      IO-Link evaluation kit using STEVAL-IDP004V1 master evaluation board and STEVAL-IDP003V1 kit

      AN4075

      STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      L6360 and L6362A: A smart way to drive industrial sensors and actuators 1.0
      906.99 KB
      PDF

      L6360 and L6362A: A smart way to drive industrial sensors and actuators

Publications and Collaterals

    • 概要 バージョン サイズ アクション
      IO-Link Nucleo Packs based on L6360, L6362A and STM32 1.0
      299.57 KB
      PDF
      L6360 &amp; L6362A - Industry 4.0をサポート 07.2018
      272.77 KB
      PDF

      IO-Link Nucleo Packs based on L6360, L6362A and STM32

      L6360 &amp; L6362A - Industry 4.0をサポート

    • 概要 バージョン サイズ アクション
      Intelligent power switches (IPS) 04.2018
      627.09 KB
      PDF
      IO-Link向け ソリューション 08.2017
      1.12 MB
      PDF

      Intelligent power switches (IPS)

      IO-Link向け ソリューション


    • The STEVAL-IDP004V1 (powered by an STM32F205) hosts four L6360 IO-Link and SIO (Standard Input Output) mode Master transceivers, and can retrieve information from up to four STEVAL-IDP003V1 sensor boards. These sensor boards are powered by an STM32L071 and host the L6362A IO-Link and SIO mode Device transceiver.

      The solution is for industrial applications running serial asynchronous communication protocols such as IO-Link.

      This evaluation tool replicates an industrial-sensor board (form factor is 8 x 70 mm), but it also lets you swap the sensors (four daughter boards are provided with VL6180X, IIS2DH, STTS751, IIS328DQ) so you can perform proximity, vibration, temperature or acceleration measurements.

      A GUI is available for use with any free terminal emulator.
      The two boards are equipped with standard industrial M12 connectors, as you would expect in real use scenarios involving predictive maintenance applications.
      The IO-Link protocol stack is not included in the package.
       

      Solution Components
      製品型番 概要 ステータス Core Products Price (US$)*
      Order / Download
      Buy All
      STEVAL-IDP004V1

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      続きを読む

      IO-Link master multi-port evaluation board based on L6360
      Active
      L6360 123.73 Buy now
      STEVAL-IDP003V1

      Key features

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      続きを読む

      IO-Link industrial modular sensor board based on L6362A
      Active
      L6362A 106.58 Buy now
      STSW-IO-LINK

      Key features

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      続きを読む

      IMAGE

      STSW-IO-LINK
      STSW-IO-LINK
      IO-Link demonstration kit firmware
      Active
      -
      ソフトウェア
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-IO-LINK 1.1.1 Active ST
      STEVAL-IDP004V1

      説明 :

      IO-Link master multi-port evaluation board based on L6360

      Price (US$)*

      123.73

      Key features

      • Main supply voltage 32 V maximum
      • 4 L6360 IO-Link master devices
      • RS-485 serial interface
      • CAN serial interface
      • USB interface
      • DC-DC converter
      • On-board reverse polarity protection
      • Designed to meet IEC requirement for industrial standards
      • RoHS and WEEE compliant

      続きを読む

      STEVAL-IDP003V1

      説明 :

      IO-Link industrial modular sensor board based on L6362A

      Price (US$)*

      106.58

      Key features

      • Main supply voltage: 32 V maximum
      • STM32L071CZ microcontroller
      • IO-Link PHY using the L6362A device for data communication with host unit
      • DC-DC converter and linear regulator on board
      • Integrated reverse polarity protection on L6362A ICs
      • Multi-sensor connection
      • 400 kHz I²C communication
      • PCB designed to accept real industrial sensors (8 mm x 70 mm, with 0.8 mm thickness)
      • Designed to meet IEC industrial standard requirements
      • RoHS compliant

      続きを読む

      STSW-IO-LINK

      説明 :

      IO-Link demonstration kit firmware

      Price (US$)*

      -
      ソフトウェア

      Key features

      • Firmware package developed for STM32 microcontroller ARM® Cortex® -M0+ and ARM Cortex-M3
      • Compliant with STM32Cube framework
      • Portable across other STM32 platforms
      • PC interface based on RS-485 communication
      • Communication layer for exchanging data between master and sensor nodes
      • Sensor configuration and sensor data acquisition
      • Fast Fourier Transform (FFT) calculation to evaluate the vibration spectrum

      続きを読む

      IMAGE

      STSW-IO-LINK
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-IO-LINK 1.1.1 Active ST

製品型番 製品ステータス パッケージ グレード RoHSコンプライアンスグレード 材料宣誓書**
L6360
Active
VFDFPN 26 3.5x5 インダストリアル Ecopack2
L6360TR
Active
VFDFPN 26 3.5x5 インダストリアル Ecopack2

L6360

Package:

VFDFPN 26 3.5x5

Material Declaration**:

PDF XML

Marketing Status

Active

Package

VFDFPN 26 3.5x5

Grade

Industrial

RoHS Compliance Grade

Ecopack2

L6360TR

Package:

VFDFPN 26 3.5x5

Material Declaration**:

PDF XML

Marketing Status

Active

Package

VFDFPN 26 3.5x5

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.