NFC / RFID

主な特徴

• Five ST25TV02K printed paper labels
• Five ST25TA02KB printed PET labels
• Five ST25TV02K printed PET labels
• Five ST25TV512 printed paper labels
• Five ST25TA64K printed paper tickets

さらに表示

主な特徴

• Ready-to-use printed circuit board with
  • ST25TA02KB-P NFC/RFID Tag in UFDFPN5 ECOPACK®2 package
  • 19 mm2 single layer inductive antenna, etched on the PCB
• Contactless interface
  • TruST25™ digital signature
  • NFC Forum Type 4 Tag
  • ISO/IEC 14443 Type A
  • 106 kbps data rate
  • Internal 50 pF tuning capacitance, enabling design of small inductive antennas
• Memory
  • 256 Byte (2 Kbit) EEPROM with NDEF data support
  • 200-year data retention
  • 1 million erase-write cycles endurance
  • 128-bit password data protection
  • 20-bit event counter for read or write access with anti-tearing feature
• Digital pad
  • Configurable general purpose output (GPO) indicating, for example, RF field detection

さらに表示

主な特徴

• ST25TA02K NFC seal
• ST25TA02K NFC stickers
• ST25TA02K key fob
• ST25TA02K NFC bracelet
• ST25TA64K NFC cards
• ST25TA02K NFC Secure paper label

さらに表示

主な特徴

• ST25TA02K with a wet inlay 10*17 mm2 copper antenna
• ST25TA02K with a wet inlay aluminum antenna
• ST25TA02K with round- and square-stickers aluminum antennas
• ST25TA64K with a PET card
• ST25TA64K with a water-proof tag

さらに表示

主な特徴

• ST25DV64K dynamic NFC tag solution based on 64K-bit (8K-Byte) EEPROM and with I²C interface, Fast Transfer Mode and Energy Harvesting features
• STM32L031K6 ultra-low-power ARM Cortex-M0+ MCU running at 32 MHz with 32-Kbytes Flash and 8-Kbytes RAM
• LIS2DW12 ultra-low-power high-performance three-axis linear accelerometer
• LPS22HB ultra-compact piezo-resistive absolute pressure sensor which functions as a digital output barometer: 260-1260 hPa
• HTS221 capacitive digital sensor for relative humidity and temperature
• STLQ015 low drop linear regulator power management
• CR2032 Battery powered (not included)
• STM32Cube function pack (FP-SNS-SMARTAG1)
• Android (Google Play) and iOS demo apps (ST SmarTag)
• Suitable for the following applications:
  • Internet of Things
  • Supply Chain and Cold-Chain Management
  • Smart building, home and city
  • Retail and apparel
  • Smart packaging
  • Medical and pharmaceutical
  • Batteryless sensing
  • Smart agriculture (soil control, animal tracking, etc.)

さらに表示

主な特徴

• Based on ST25R3911B high performance HF reader with 1.4 W output power
  • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
  • Up to 1.4 W output power with differential antenna
  • DPO (Dynamic Power Output)
  • User selectable and automatic gain control
  • QFN32, 5 mm x 5 mm package
• STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
• 65 mm x 74 mm, two turn antenna etched on the PCB
• Micro-USB connector for communication with the host PC and board supply
• Integrated ST-LINK/V2 for programming and debugging of the STM32L476
• 2.4 inch resistive touch TFT connected in 16 bit parallel mode
• S-Touch controller
• Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

さらに表示

主な特徴

• Ready-to-use printed circuit board with:
  • ST25DV02K-W2 NFC/RFID tag IC in SO8N ECOPACK2® package
  • 22 x 38 mm2 single layer inductive antenna, etched on the PCB
  • Two LEDs illustrating duty cycle of PWM outputs
• Contactless interface
  • Based on ISO/IEC 15693 and NFC Forum Type 5
  • 28.5 pF internal tuning capacitance
• Memory and data protection
  • 2-Kbit EEPROM
  • Up to four independent areas
  • TruST25™ digital signature mechanism for authentication
• FCC verified
• RoHS compliant

さらに表示

主な特徴

• On-board NFC card reader IC: ST25R3911B
• 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
• Six general purpose LEDs
• ISO 18092 (NFCIP-1) active P2P
• ISO 14443A and ISO14443B
• ISO 15693
• FeliCa™
• VHBR
  • 6.8 Mbit/s AFE and PCD to PICC framing
  • 3.4 Mbit/s PICC to PCD framing
• Up to 1.4 W output power with differential antenna
• Possibility of driving two antennas in single ended configuration
• Inductive and capacitive wake-up
• Automatic antenna tuning system
• Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
• Equipped with Arduino™ UNO R3 connector
• Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
• Scalable solution for multiple board cascade
• FCC certified
• RoHS compliant

さらに表示

主な特徴

• Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
  • ISO 18092 (NFCIP-1) active P2P
  • ISO14443A, ISO14443B and FeliCa™
  • ISO15693
  • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended mode
  • Inductive and capacitive Wake-up
  • Automatic antenna tuning system
  • DPO (Dynamic Power Output)
  • User selectable and automatic gain control
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • 6 Mbit/s SPI
  • Wide supply voltage range (from 2.4 V to 5.5 V)
  • QFN32, 5 mm x 5 mm package
• STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
• 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
• Micro-USB connector for communication with the host PC and board powering
• Six LEDs indicating the presence of the RF field and of the protocol used to communicate

さらに表示

主な特徴

• Two ready-to-use printed circuit boards (PCB):
  • ST25DV_Discovery_Mboard:
  • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
  • LCD color screen (320 x 200 pixels)
  • Touch screen driver
  • Different color LEDs (power, user, ST link)
  • User push button
  • Joystick for menu selection
  • リセットボタン
  • On board ST link for microcontroller firmware upgrade and debug
  • ST link mini USB
  • User micro USB
  • USB micro or mini connector for board powering
  • Demonstration use cases stored in memory
  • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
• ST25DV_Discovery_ANT_C5:
  • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
  • ST25DV04K Dynamic NFC / RFID tag
  • I² C interface connector
  • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
  • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

さらに表示

主な特徴

• Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
• Up to 4-Kbit memory with NDEF support
• 54 mm diameter, single layer circular antenna
• Compatible with STM32 Nucleo boards
• Equipped with Arduino™ UNO R3 connector
• Self-powered or powered through the Arduino™ UNO R3 connectors
• Three general purpose LEDs
• Scalable solution, capable of cascading multiple boards for larger systems
• Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
• FCC and IC verified
• RoHS compliant

さらに表示

主な特徴

• M24SR64-Y Dynamic NFC/RFID tag IC
• NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
• Compatible with STM32 Nucleo boards
• Equipped with Arduino UNO R3 connector
• Powered through the Arduino UNO R3 connectors
• 3 color LEDs for general purpose

さらに表示

主な特徴

• Ready-to-use printed circuit board (PCB) including:
  • M24SR64-Y Dynamic NFC/RFID tag
  • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
  • LCD Color Screen (320*200 pixels)
  • Different color LEDs
  • USB microB connector for board powering
  • JTAG connector for microcontroller firmware upgrade and debug
  • Joystick for menu selection
• M24SR-DISCO-PREM specific features:
  • Bluetooth module with audio outputs connected to Jack 3.5
  • Headset

さらに表示