フライバック･コンバータ

主な特徴

• AC main input voltage: V_IN 85 V_AC - 265 V_AC
• Main frequency: f_L 50 Hz - 60 Hz
• Output voltage: V_OUT 12 V
• Max output current: I_OUT 333 mA
• Precision of output regulation: ΔV_{OUT_LF} ±5 %
• High frequency output voltage ripple: ΔV_{OUT_HF} 50 mV
• Min active mode efficiency: η_AV 71 %
• Max ambient operating temperature: T_AMB 60 ºC
• Thermal shutdown with hysteresis
• Delayed overload protection
• Open loop failure protection (if auxiliary winding is used)
• RoHS compliant

さらに表示

主な特徴

• Input voltage range: 90 V_RMS to 265 V_RMS
• Output voltage: 5 V
• Max output current: I_OUTmax 2 A
• Peak output current: I_OUTpk 3 A
• Precision of output regulation: ΔV_{OUT_LF} ±5%
• High frequency output voltage ripple: ΔV_{OUT_HF} 50 mV
• Max ambient operating temperature: TA 60 ºC
• 800 V avalanche rugged power section
• PWM operation , at 115 kHz with frequency jittering for lower EMI
• Limiting current with adjustable set point
• On-board soft-start
• Safe auto-restart after a fault condition, low standby power (< 50 mW at 265 Vac)
• Adjustable and accurate over voltage protection, thermal shutdown with hysteresis, delayed overload protection
• RoHS compliant

さらに表示

主な特徴

• AC Main Input voltage range: 100 V_AC to 265 V_AC
• Mains frequency (f_L ): 50 Hz / 60 Hz
• Output voltage typ: 12 V
• Output current: 1.25 A
• Output ripple voltage: 50 mV
• Rated output power: 15 W
• Input power in standby @230 V_AC : 50 mW
• Active mode efficiency: 78%
• Ambient operating temperature: 60 °C
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 90 – 265 V_AC frequency: 50 - 60 Hz
• Output voltage/current: 12 V/1.25 A (1.65 A peak)
• Very compact size
• Standby mains consumption: lower than 30 mW at 230 V_AC
• Minimum active mode efficiency: 81.55%
• Minimum active mode at 10% load efficiency: 71.55%
• EMI: in accordance with EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 90 – 265 V_AC , frequency: 50 – 60 Hz
• Output voltage: 12 V/0.84 A
• Very compact size
• Quasi resonant operation
• Standby mains consumption: < 35 mW at 230 V_AC
• Average efficiency: > 82% (compliant with CoC version 5, Tier 2)
• EMI: in accordance with EN55022-Class-B

さらに表示

主な特徴

• Input voltage: V_in = 90 - 277 V_rms , f = 45-66 Hz
• Output voltage: 52 V / 1.2 A
• High power factor, low THD
• Full load efficiency: greater than 90%
• Short circuit protection
• Safety: complies with EN60065
• PCB board: 165 mm x 50 mm double sided PCB
• RoHS compliant

さらに表示

主な特徴

• Efficiency: 80% typical at 12 V output
• Line regulation: +/- 0.2%
• EMI: EN55022 class \"B\"
• Safety: overvoltage, overcurrent, brown out
• Load and cross regulation #2: +/-10%
• Load and cross regulation #1: +/-1%
• Input voltage range: 85 Vac to 264 Vac
• Temperature range from: 0° to 85 °C 105°C possible
• Input frequency: 47 Hz to 63 Hz
• Output voltage and current # 2: 12 V @ 0.25 A
• Output power: 5.5 W
• Output voltage and current # 1: 5 V @ 0.5 A

さらに表示

主な特徴

• Input voltage: Vin: 90 - 264 Vrms, f: 45-66 Hz
• Output voltages:
  • 1.8 V/1.73 A, dedicated to digital circuitry and to 1.2 V local post regulators
  • 3.3 V/0.5 A, dedicated to analog peripherals and 2.5 V regulators
  • 5 V/2.4 A, dedicated to HDD/DVD and 5 V circuitry
  • 12V/ 1.9Avg÷2.9Apk, dedicated to HDD/DVD, SCART and LNBP21 for satellite stb. Average load is 1.9 A, 2.9 A is dedicated to HDD/DVD spin-up
• Standby: better then 800 mW @ 230 Vin and 50 mA load
• No-load: better then 250 mW @ 230 Vin
• Short circuit protection: on all outputs, with auto-restart at short removal
• PCB type and size: Single side 70 μm (2-Oz), CEM-1, 150 x 75 mm
• Safety: Acc. to EN60065, creep age and clearance minimum distance 6.4 mm
• EMI: Acc. to with EN50022-Class B

さらに表示

主な特徴

• Vin: 85 ~ 305 Vrms / f: 45 ~ 66 Hz
• V_out1 : 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
• V_out2 : 3.3 VDC ± 4 %, 100 mA
• Maximum total output current: 1 A
• Standby < 120 mW at 230 VAC
• Short-circuit: protected
• PCB type and size: FR4, single-side 35 μm, 32 x 90 mm
• Isolation: isolated 4 kV / 8 mm
• EMI: according to EN55022 Class
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 90 264 Vac - frequency 45 ÷ 65Hz
• Output voltage: 19 V @ 3.42 A continuous operation
• Mains harmonics: according to EN61000-3-2 Class-D or JEITA-MITI Class-D
• Stand-by mains consumption: <100 mW @ 230 Vac
• Average efficiency: better than 89% without synchronous rectification
• EMI: according to EN55022-Class-B
• Safety: according to EN60950
• Dimensions: 58x121 mm, 25 mm components maximum height
• PCB: single side, 35 μm, CEM-1, mixed PTH/SMT

さらに表示

主な特徴

• Input:
  • V_IN : 85 - 264 Vrms
  • f: 45 - 66 Hz
• Output:
  • 12 V_DC ± 10% (referred to -5 V), 160 mA
  • -5 VDC ± 4%, 400 mA
• Maximum output power: 4 W (range is up to 6 W for EU)
• Standby power: 35 mW at 230 VAC
• Short-circuit protected
• Insulation: non-insulated; N connected to output GND
• EMI: in accordance with EN55022 class B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 264 V_AC
  • frequency 45 - 65 Hz
• Single-output voltage: 12 V at 1 A continuous operation
• Standby mains consumption: < 30 mW at 230 V_AC
• Average efficiency: > 80%
• Fully protected against faults (overload, feedback disconnection and overheating)
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Wide input voltage range: 90 V_AC to 264 V_AC
• Output voltage: 12 V
• Output current: 1.25 A
• Rated output power: 15 W
• Quasi resonant operation
• Input power standby @ 230 V_AC : < 30 mW
• Active mode efficiency: > 82%
• EMI: pre-compliance with EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Zero-power input consumption ratified as per IEC62301 Clause 4.5 (P_{IN_ZPM} < 5 mW at 230 V_AC )
• Negative output voltage easily set through the voltage divider
• Five-star energy efficiency when operating with no load (P_{IN_no_load} < 10 mW at 230 V_AC )
• Meets ErP Lot 6 Tier 2 requirements for household and office equipment
• Meets European regulation 1275/2008 regarding eco-design requirements for standby and off-mode electric power consumption for household and office equipment
• Compliant with the ErP Lot 6 Tier 2 requirements in off-mode
• Compliant with the 10% load efficiency and 4-point average active-mode efficiency targets prescribed by the European CoC ver. 5 Tier 2
• Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
• VIPer0P 800 V avalanche rugged technology and its embedded protections ensure enhanced system reliability
• RoHS compliant

さらに表示

主な特徴

• Triple output voltage: 15 V @ 0.55 A_rms (0.7 A peak), 3.3 V @ 200 mA and 5 V @ 100 mA
• Extended AC mains input voltage range: 90 V_AC to 440 V_AC
• Meets STCOMET smart meter and power line communication system specs
• EMC with EN55022, EN61000, EN61000-4-4, EN61000-4-5, EN61000-4-6
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 90 - 264 V AC, frequency 45-65 Hz
• Output voltage: 5 V @ 1 A continuous operation
• Optoless constant voltage - constant current output regulation
• Standby mains consumption: < 100 mW @ 230 V AC
• Average efficiency: >70%
• EMI: in accordance with EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 85 – 265 V_AC ; frequency: 50 – 60 Hz
• Output voltage 1: 5 V / 1.2 A
• Output voltage 2: 12 V / 0.75 A
• Very compact size
• Standby mains consumption: < 40 mW at 230 V_AC
• Average efficiency: > 75%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 85 – 265 V_AC frequency: 50 – 60 Hz
• Output voltage1: 5 V / 1.2 A
• Output voltage2: 12 V / 0.75 A
• Very compact size
• Stand-by mains consumption: < 40 mW at 230 V_AC
• Average efficiency: > 75%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Input voltage: V_in = 90 - 277 V_rms , f = 45-66 Hz
• Output voltage: 52 V / 1.2 A
• High power factor, low THD
• Full load efficiency: above 90%
• Short circuit protection
• Safety: compliant with EN60065
• PCB board: 165 mm x 50 mm double-sided PCB
• RoHS compliant

さらに表示

主な特徴

• US input range: 85 – 132 V_AC , frequency: 50 – 60 Hz
• Output voltage / current: 12 V / 0.7 A (2.5 A peak)
• Very compact size
• Standby mains consumption: lower than 25 mW at 115 V_AC
• Min. active mode efficiency: 81.14%
• Min. active mode at 10% load efficiency: 71.14%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal AC main input voltage range: 85V_AC to 265V_AC
• Output voltage: 5 V
• Output current: 1.2 A
• Rated output power: 6 W
• No load input power @230 V_AC : < 10 mW
• Active mode efficiency: > 78%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range: 90 – 265V_AC , frequency: 50 – 60 Hz
• Output voltage: 12 V
• Output current: 0.65 A
• Very compact size
• Stand-by mains consumption: < 20 mW at 230V_AC
• Average efficiency: > 81%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal AC main input voltage range: 85V_AC to 265V_AC
• Output range: 5 V / 0.85 A
• Rated output power: 4.25 W
• Input power in standby @ 230 V_AC : < 9 mW
• Active mode efficiency: > 74%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal AC main input voltage range: 85 to 265 V_AC
• Output range: 12 V - 0.6 A
• Rated output power: 7.2 W
• Input power in standby @ 230 V_AC : less than 18 mW
• Active mode efficiency: > 80%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Smart standby architecture using Zero Power Mode (ZPM) with IR remote on/off control suitable for Air Conditioning subsystems and other applications
• Based on VIPer0P high voltage converter with embedded 800V avalanche rugged power MOSEFET and a current mode PWM controller with a set of protections for enhanced system reliability
• Input power consumption in Zero Power Mode lower than 8 mW at 230V_AC (switched-off by remote IR control) while supplying microcontroller and IR receiver
• Input power consumption at no load less than 30 mW at 230V_AC , including microcontroller consumption
• Average efficiency > 80.2% compliant with EuCoC rev. 5 – Tier 2 and EPS of DOE USA
• Meets IEC55022 Class B conducted EMI even with reduced EMI filter, thanks to the frequency jittering feature
• Meets IEC61000-4-2(ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge)
• RoHS compliant

さらに表示

主な特徴

• Smart standby architecture using the zero power mode (ZPM) for capacitive touch sensing in consumer electronics applications
• Enhanced system reliability thanks to VIPer0P 800 V avalanche rugged technology and its embedded protection
• Minimized system input power consumption: less than 30 mW at 230 V_AC in ZPM
• IEC55022 Class B conducted EMI compliant, even with reduced EMI filter, thanks to the frequency jittering feature
• IEC61000-4-2 (ESD), IEC61000-4-4 (EFT) and IEC61000-4-5 (Surge) compliant
• RoHS compliant

さらに表示

主な特徴

• AC main input voltage range : 175 V_AC to 275 V_AC
• Triple output voltages: 12 V - 1 A (isolated), 15 V - 200 mA (non-isolated), 5 V - 200 mA (non-isolated), continuous operation
• High performance at low load conditions: < 50 mW at no-load condition and < 1.5 W input power at minimum operative output power (0.91 W)
• Efficiency at full load: > 81%
• EMI: According to EN55022-Class-B, using low cost input filter
• RoHS compliant

さらに表示

主な特徴

• USB wall power adapter input: 85 V_AC to 264 V_AC
• USB voltage output: 5 V, 9 V and 15 V
• Current limit: 3 A for all voltage level profiles
• Load power limited to 45 W
• Cable compensation
• Isolated quasi-resonant flyback
• Efficiency 90% (approx.)
• USB Type-C Power Delivery compatible
• USB-IF certified

さらに表示

主な特徴

• Universal AC Main Input voltage range : 90 V_AC to 264 V_AC
• Output range: 5 V - 3 A continuous operation
• Constant voltage (CV) and constant current (CC) operation with CC primary sensing
• Input power in standby < 10 mW at 230 V_AC
• Average efficiency: > 81.84%, complies with EuCoC rev. 5 – Tier 2 and EPS of DOE USA
• EMI: According to EN55022-Class
• Small form factor: (44 x 35 x 15 mm)
• RoHS compliant
• WEEE compliant

さらに表示

主な特徴

• Double output voltage: 12 V at 0.7 A_rms (1 A peak) and 6 V at 200 mA
• Secondary side regulation (SSR)
• Extended AC mains input voltage range: 85 to 500 V_AC
• EMC with EN55022, EN61000, EN61000-4-4, EN61000-4-5, EN61000-4-6
• WEEE compliant
• RoHS compliant

さらに表示

主な特徴

• Double output voltage: 12 V at 0.7 A_rms (1 A peak) and 6 V at 200 mA
• Primary side regulation (PSR)
• Extended AC mains input voltage range: 85 to 498 V_AC
• EMC with EN55022, EN61000, EN61000-4-4, EN61000-4-5, EN61000-4-6
• WEEE compliant
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 264 V_AC
  • frequency 45 - 65 Hz
• Single output voltage: 12 V at 0.35 A continuous operation
• Stand-by mains consumption: < 30 mW at 230 V_AC
• Average efficiency: > 75 %
• Fully protected against faults (overload, feedback disconnection and overheating)
• EMI: according to EN55022-Class-B

さらに表示

主な特徴

• Offline converter for wide range input voltage
• Output power: up 6 W
• No need for auxiliary winding (selectable option)
• 30 mW standby consumption (with auxiliary winding)
• High efficiency tested in accordance with the ENERGY STAR^® active mode method
• EMI test pre-compliant to EN55022 Class B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 264 V_AC
  • frequency 45 - 65 Hz
• Single-output voltage: 5 V @ 3 A continuous operation
• Standby mains consumption:< 30 mW @ 230 V_AC
• Average efficiency: > 75%
• Complies with EuP Lot 6 requirements
• Fully protected against faults overload, overvoltage, transformer saturation and overheating
• Compliant with EMC norm EN55022-Class-B
• RoHS compilant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 264 V_AC
  • frequency 45 - 65 Hz
• Single output voltage: 12 V @ 1 A continuous operation
• Standby mains consumption: < 30 mW @ 265 V_AC
• Average efficiency: > 85%
• Fully protected against faults (overload, feedback disconnection and overheating)
• EMI: according to EN55022-Class-B

さらに表示

主な特徴

• Wide input voltage range (V_IN ): 90 to 265 V_rms
• Nameplate output voltage (V_out ): 5 V
• Max output current I_OUT : 2.2 A
• Precision of output regulation: ±5%
• High frequency output voltage ripple (ΔV_{out_HF} ): 50 mV
• Max ambient operating temperature (T_A ): 60 °C
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 265 V_AC
  • frequency 45 - 65 Hz
• Single-output voltage: 12 V at 350 mA continuous operation
• Standby mains consumption: < 30 mW at 230 V_AC
• Average efficiency: > 75%
• Complying with EuP Lot 6 requirements
• Fully protected against short-circuit
• Fully protected against overheating
• Compliant to EMC norm EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Universal input mains range:
  • input voltage 90 - 265 V_AC
  • frequency 45 - 65 Hz
• Single-output voltage: 12 V at 0.35 A continuous operation
• Standby mains consumption: < 30 mW at 230 V_AC
• Average efficiency: > 74%
• Fully protected against faults (overload, feedback disconnection and overheating)
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示

主な特徴

• Input voltage range: 90 V_RMS - 265 V_RMS
• Output voltage: 5 V
• Max output current: I_OUT max = 2 A
• Peak output current: I_OUT pk = 3 A
• Precision of output regulation: ΔV_{OUT_LF} ±5%
• High frequency output voltage ripple: ΔV_{OUT_HF} = 50 mV
• Max ambient operating temperature: T_A = 60 ºC
• 800 V avalanche-rugged power section
• PWM operation at 60 kHz with frequency jittering for lower EMI
• Limiting current with adjustable set point
• On-board soft-start
• Safe auto-restart after a fault condition; low standby power (< 50 mW at 265 V_ac ).
• Adjustable, accurate overvoltage protection, thermal shutdown with hysteresis, delayed overload protection

さらに表示

主な特徴

• Input voltage range VIN: 90 VRMS - 265 VRMS
• Output voltage VOUT: 16 V
• Max output current IOUT: 0.28 A
• Precision of output regulation VOUT_LF: ±5%
• High frequency output voltage ripple VOUT_HF: 50 mV
• Max ambient operating temperature TA: 60 °C
• RoHS compliant

さらに表示

主な特徴

• AC main input voltage V_IN : 85 V_AC - 265 V_AC
• Main frequency f_L : 50 Hz; 60 Hz
• Output voltage V_OUT : 12 V
• Max output current I_OUT : 333 mA
• Precision of output regulation ΔV_{OUT_LF} : ± 5%
• High frequency output voltage ripple: ΔV_{OUT_HF} 50 mV
• Min active mode efficiency ηAV = 71%
• Max ambient operating temperature: T_AMB = 60 °C

さらに表示

主な特徴

• Universal input mains range: 85 - 265 V_AC frequency: 50 - 60 Hz
• Output voltage: 5 V / 0.6 A
• Very compact size
• Stand-by mains consumption: < 30 mW at 230 V_AC
• Min active mode efficiency η_AV =66.89%
• EMI: according to EN55022-Class-B
• RoHS compliant

さらに表示