Product overview
Description
The PM7060 is an integrated power stage solution optimized for synchronous buck applications to offer high current, high efficiency, and high power density performance. Packaged in 5x6 mm QFN package, the PM7060 enables voltage regulator design to deliver in excess of 60 A per phase current. The internal power MOSFETs utilize state-of-the-art technology that delivers industry benchmark performance to significantly reduce switching and conduction losses.
The PM7060 incorporates an advanced MOSFET gate driver IC that features high current driving capability, adaptive deadt-time control, and integrated bootstrap switch, a thermal monitor that alerts the system of excessive junction temperature. This driver is compatible with 3.3 V logic PWM with tri-state to manage High Impedance Output. Diode emulation mode can be enabled at light loads through the use of GLCTRL signal.
The device also integrates a current monitor to provide a real-time scale down of inductor current (IMON). A temperature monitor provides the system with an indication of the power stage internal temperature (TMON) and can be used to throttle the system operation down to a safer level if needed.
The device also integrates fault alerts such as HS FET overcurrent, overtemperature and HS MOSFET short failures.
-
All features
- Thermally enhanced QFN 5x6 41L package
- Optimized MOSFET switching performance with integrated Schottky diode in LS MOSFET
- Up to 60 A continuous current
- High frequency operation up to 2 MHz
- Power MOSFETs optimized for 12 V input stage and 10% to 15% duty cycle operation
- 3.3 V PWM logic with tri-state and hold-off
- PWM minimum controllable on-time of 30 ns
- Diode emulation mode at light loads for high efficiency over the full load range using GLCTRL pin
- Low PWM propagation delay (< 20 ns)
- Current sense monitor (IMON)
- Temperature monitor (TMON)
- Overtemperature alert
- HS MOSFET overcurrent and short alert
- Undervoltage lockout for VDRV
- Material categorization: for definitions of compliance
EDA Symbols, Footprints and 3D Models
Quality and Reliability
Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
---|---|---|---|---|---|
PM7060TR | Proposal | - | Industrial | - | |
PM7060TR
Package:
-Material Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Sample & Buy
Part Number | Marketing Status | Budgetary Price (US$)*/Qty | Order from ST | Order from distributors | Package | Packing Type | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PM7060TR | | | distributors No availability of distributors reported, please contact our sales office |
PM7060TR Proposal
(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors