The TSM1052 is a highly integrated solution for SMPS applications requiring a dual control loop to perform CV (constant voltage) and CC (constant current) regulation.
The TSM1052 integrates a voltage reference, two op amps (with OR-ed open-drain outputs), and a low-side current sensing circuit.
The voltage reference, along with one op amp, is the core of the voltage control loop; the current sensing circuit and the other op amp make up the current control loop.
The external components needed to complete the two control loops are:
A resistor divider that senses the output of the power supply (adapter, battery charger) and fixes the voltage regulation set point at the specified value; A sense resistor that feeds the current sensing circuit with a voltage proportional to the dc output current; this resistor determines the current regulation set point and must be adequately rated in terms of power dissipation; Frequency compensation components (RC networks) for both loops.
The TSM1052, housed in one of the smallest package available, is ideal for space-shrunk applications such as adapters and chargers.
- Easy frequency compensation
- Wired-or open-drain output stage
- Secondary-side constant voltage and constant current control
- Very low quiescent consumption
- Very low voltage operation
- Low external component count
- SOT23-6 micro package
- High-accuracy internal reference
Recommended for you
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||Material Declaration**|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.